Egress Interaction through Turbine Rim Seals

[1]  J. Michael Owen.  Prediction of Ingestion Through Turbine Rim Seals—Part II: Externally Induced and Combined Ingress , 2011 .

[2]  Reza S. Abhari,et al.  Influence of Rim Seal Purge Flow on the Performance of an Endwall-Profiled Axial Turbine , 2011 .

[3]  Martin G. Rose,et al.  Improving the Efficiency of the Trent 500 HP Turbine Using Non-Axisymmetric End Walls: Part II — Experimental Validation , 2001 .

[4]  Torsten Fransson,et al.  Investigation of the Spanwise Transport of the Rotor – Stator Slot Flow in a Test Turbine , 2000 .

[5]  Karen A. Thole,et al.  Using a Tracer Gas to Quantify Sealing Effectiveness for Engine Realistic Rim Seals , 2016 .

[6]  Gary D. Lock,et al.  Measurements and Modelling of Ingress in a New 1.5-Stage Turbine Research Facility , 2016 .

[7]  Cheng-Zhang Wang,et al.  Comparison of Flow Characteristics in Axial-Gap Seals for Close- and Wide-Spaced Turbine Stages , 2007 .

[9]  Jonathan Corpus Ong,et al.  The Effect of Coolant Injection on the Endwall Flow of a High Pressure Turbine , 2012 .

[10]  A. B. Turner,et al.  Ingestion into the upstream wheelspace of an axial turbine stage , 1994 .

[11]  John W. Chew,et al.  Numerical Simulation of the Flow Interaction Between Turbine Main Annulus and Disc Cavities , 2006 .

[12]  Gary D. Lock,et al.  Review of Ingress in Gas Turbines , 2016 .

[13]  Howard P. Hodson,et al.  Improving Turbine Stage Efficiency and Sealing Effectiveness Through Modifications of the Rim Seal Geometry , 2013 .

[14]  Reza S. Abhari,et al.  Aerodynamic robustness of end wall contouring against rim seal purge flow , 2014 .

[15]  Cengiz Camci,et al.  Influence of Leading Edge Fillet and Nonaxisymmetric Contoured Endwall on Turbine NGV Exit Flow Structure and Interactions With the Rim Seal Flow , 2013 .