Controlled protein adsorption on microfluidic channels with engineered roughness and wettability

Abstract Plasma processing is demonstrated as a generic technology not only to fabricate, roughen, and control the wetting properties of microfluidic devices but also to control the protein adsorption in microfluidic channels intended for bio-analysis. After lithography on poly(methyl methacrylate) (PMMA) substrates, deep anisotropic O2 plasma etching was utilized to pattern microchannels, at conditions where very rough bottom walls were obtained. Where desirable, the rough surfaces were hydrophobized by means of a C4F8 plasma deposition step through a stencil mask creating superhydrophobic and hydrophilic stripes. In such microchannels, protein adsorption was controlled by the surface roughness and wettability showing null adsorption on superhydrophobic stripes and greatly enhanced adsorption on rough hydrophilic stripes. Using the biotin–streptavidin system, we demonstrate application of rough microchannels in extremely sensitive detection of proteins with two orders of magnitude improvement compared to flat microchannels. Thus, such control in protein immobilization on the rough walls can be potentially applied in bio-analysis.

[1]  Angeliki Tserepi,et al.  "Smart" polymeric microfluidics fabricated by plasma processing: controlled wetting, capillary filling and hydrophobic valving. , 2010, Lab on a chip.

[2]  S. Ekström,et al.  Macro-/nanoporous silicon as a support for high-performance protein microarrays. , 2003, Analytical chemistry.

[3]  E. Gogolides,et al.  High-aspect-ratio plasma-induced nanotextured poly(dimethylsiloxane) surfaces with enhanced protein adsorption capacity , 2008 .

[4]  K. Yang,et al.  Microfluidic chip with porous anodic alumina integrated with PDMS/glass substrate for immuno-diagnosis , 2009 .

[5]  E. Gogolides,et al.  Nano-texturing of poly(methyl methacrylate) polymer using plasma processes and applications in wetting control and protein adsorption , 2009 .

[6]  Lei Zhai,et al.  Microfluidic valves based on superhydrophobic nanostructures and switchable thermosensitive surface for lab-on-a-chip (LOC) systems , 2008 .

[7]  Frédéric Reymond,et al.  Polymer microfluidic chips for electrochemical and biochemical analyses , 2002, Electrophoresis.

[8]  H. Becker,et al.  Polymer microfluidic devices. , 2002, Talanta.

[9]  A Tserepi,et al.  Mechanisms of oxygen plasma nanotexturing of organic polymer surfaces: from stable super hydrophilic to super hydrophobic surfaces. , 2009, Langmuir : the ACS journal of surfaces and colloids.

[10]  J. Suk,et al.  Capillary flow control using hydrophobic patterns , 2007 .

[11]  Piotr Grabiec,et al.  Fluorine‐Based Plasma Treatment of Biocompatible Silicone Elastomer: The Effect of Temperature on Etch Rate and Surface Properties , 2008 .

[12]  A Tserepi,et al.  Plasma nanotextured PMMA surfaces for protein arrays: increased protein binding and enhanced detection sensitivity. , 2010, Langmuir : the ACS journal of surfaces and colloids.

[13]  Changchun Liu.  Rapid fabrication of microfluidic chip with three-dimensional structures using natural lotus leaf template , 2010 .

[14]  T. Abe,et al.  Polymer surface morphology control by reactive ion etching for microfluidic devices , 2008 .

[15]  C. Batt,et al.  Nucleic acid purification using microfabricated silicon structures. , 2003, Biosensors & bioelectronics.

[16]  J. Garra,et al.  Dry etching of polydimethylsiloxane for microfluidic systems , 2002 .

[17]  A. Boudaoud,et al.  Adhesion: Elastocapillary coalescence in wet hair , 2004, Nature.

[18]  Patterning of thick polymeric substrates for the fabrication of microfluidic devices , 2005 .

[19]  N. F. de Rooij,et al.  Microfluidics meets MEMS , 2003, Proc. IEEE.

[20]  Frédéric Reymond,et al.  Plasma etched polymer microelectrochemical systems. , 2002, Lab on a chip.

[21]  G McHale,et al.  Nano-scale superhydrophobicity: suppression of protein adsorption and promotion of flow-induced detachment. , 2008, Lab on a chip.

[22]  Contact angle measurements on superhydrophobic carbon nanotube forests: Effect of fluid pressure , 2005, cond-mat/0505205.

[23]  N F de Rooij,et al.  Electrokinetically driven microfluidic chips with surface-modified chambers for heterogeneous immunoassays. , 2001, Analytical chemistry.

[24]  Angeliki Tserepi,et al.  Plasma processing for polymeric microfluidics fabrication and surface modification: Effect of super-hydrophobic walls on electroosmotic flow , 2008 .

[25]  K. Misiakos,et al.  Selective plasma-induced deposition of fluorocarbon films on metal surfaces for actuation in microfluidics , 2004 .

[26]  Minseok S. Kim,et al.  A microfluidic platform for 3-dimensional cell culture and cell-based assays , 2007, Biomedical microdevices.

[27]  Darwin R. Reyes,et al.  Micro total analysis systems. 2. Analytical standard operations and applications. , 2002, Analytical chemistry.

[28]  Teruo Fujii,et al.  Cell Culture in 3-Dimensional Microfluidic Structure of PDMS (polydimethylsiloxane) , 2003 .

[29]  K. Misiakos,et al.  Label-free kinetic study of biomolecular interactions by white light reflectance spectroscopy , 2006 .

[30]  Y. Zhao,et al.  Freezing a water droplet on an aligned Si nanorod array substrate. , 2008, Nanotechnology.

[31]  David B. Rhine,et al.  Fabrication of microfluidic devices in silicon and plastic using plasma etching , 2001 .

[32]  Patrick Tabeling,et al.  Wettability patterning by UV-initiated graft polymerization of poly(acrylic acid) in closed microfluidic systems of complex geometry. , 2010, Analytical chemistry.

[33]  Plasma etching of thermoset polymer films for microchannels , 2006 .