Design and optimization of a general planar zero free length spring

A zero free length (ZFL) spring is a spring with special properties, which is commonly used in static balancing. Existing methods to create ZFL springs all have their specific drawbacks, which rises to the need of a new method to create such a spring. A method is proposed to design planar ZFL springs with specified stiffness (250–750 N/m) within a certain range (up to 20 mm of displacement). Geometric non-linearities of a curved leaf spring are exploited by changing its shape. The shape is determined by a non-linear least squares algorithm, minimizing the force residuals from a non-linear numerical analysis. Constraints are introduced to help in preventing the spring from intersecting itself during deformation. For three types of springs with different boundary conditions, designs are found with characteristic shapes and maximum force errors less than 1%. A trend is observed between spring size, maximum stress and desired stiffness. New type of ZFL springs can now be designed, which can not only be used in existing applications, but also enables the use of ZFL springs in micro mechanisms.

[1]  T. Hughes,et al.  Isogeometric analysis : CAD, finite elements, NURBS, exact geometry and mesh refinement , 2005 .

[2]  Mark B. Colton,et al.  A PSEUDO-RIGID-BODY MODEL APPROACH FOR THE DESIGN OF COMPLIANT MECHANISM SPRINGS FOR PRESCRIBED FORCE-DEFLECTIONS , 2011 .

[3]  A. G. Dunning.  Slender Spring Systems, for a close-to-body dynamic arm support for people with Duchenne muscular dystrophy , 2016 .

[4]  B. Mastenbroek,et al.  Development of a Mobile Arm Support (Armon): Design Evolution and Preliminary User Experience , 2007, 2007 IEEE 10th International Conference on Rehabilitation Robotics.

[5]  Giuseppe Radaelli,et al.  Isogeometric Shape Optimization for Compliant Mechanisms With Prescribed Load Paths , 2014 .

[6]  G. K. Ananthasuresh,et al.  Perfect Static Balance of Linkages by Addition of Springs But Not Auxiliary Bodies , 2012 .

[7]  Joan Lobo-Prat,et al.  Design and pilot validation of A-gear: a novel wearable dynamic arm support , 2015, Journal of NeuroEngineering and Rehabilitation.

[8]  D. A. Streit,et al.  Equilibrators for Planar Linkages , 1993 .

[9]  Martijn Wisse,et al.  Intrinsically Safe Robot Arm: Adjustable Static Balancing and Low Power Actuation , 2010, Int. J. Soc. Robotics.

[10]  J. L. Herder,et al.  Energy-free systems: theory, conception, and design of statically balanced spring mechanisms , 2001 .

[11]  Xiaoping Qian,et al.  Full analytical sensitivities in NURBS based isogeometric shape optimization , 2010 .

[12]  Thomas J. R. Hughes,et al.  Isogeometric Analysis: Toward Integration of CAD and FEA , 2009 .

[13]  Just L. Herder,et al.  Spring-to-Spring Balancing as Energy-Free Adjustment Method in Gravity Equilibrators , 2011 .

[14]  J. Herder.  Design of spring force compensation systems , 1998 .

[15]  J. Herder,et al.  Zero stiffness tensegrity structures , 2007 .

[16]  Clément Gosselin,et al.  Static balancing of spatial six‐degree‐of‐freedom parallel mechanisms with revolute actuators , 2000 .

[17]  L. Lacoste.  A New Type Long Period Vertical Seismograph , 1934 .

[18]  Les A. Piegl,et al.  The NURBS Book , 1995, Monographs in Visual Communication.

[19]  Runze Li,et al.  Design and Modeling for Computer Experiments , 2005 .

[20]  A. P. Nagy,et al.  Isogeometric design optimisation , 2011 .