Tribological properties of flexible composite surfaces through direct ink writing for durable wearing devices

[1]  S. Chattopadhyay,et al.  Elastomeric microwell-based triboelectric nanogenerators by in situ simultaneous transfer-printing. , 2022, Materials horizons.

[2]  Sohee John Yoon,et al.  Triboresistive Touch Sensing: Grid‐Free Touch‐Point Recognition Based on Monolayered Ionic Power Generators , 2022, Advanced materials.

[3]  Yiliang Wang,et al.  Phase‐Change‐Enabled, Rapid, High‐Resolution Direct Ink Writing of Soft Silicone , 2022, Advanced materials.

[4]  B. Gozen,et al.  Direct-Ink-Writing of Liquid Metal-Graphene-based Polymer Composites: Composition-Processing-Property Relationships , 2021, Journal of Materials Processing Technology.

[5]  Qunfeng Zeng,et al.  Drag reduction and antifouling properties of non-smooth surfaces modified with ZIF-67 , 2021, Surface and Coatings Technology.

[6]  A. Shahzad,et al.  Direct ink writing (DIW) of structural and functional ceramics: Recent achievements and future challenges , 2021 .

[7]  Su Yeon Lee,et al.  Direct writing of customized structural-color graphics with colloidal photonic inks , 2021, Science advances.

[8]  Bin Su,et al.  The soft NdFeB/Ecoflex composites for soft robot with a considerable magnetostimulated shrinkability , 2021, Composites Science and Technology.

[9]  Youyi Sun,et al.  Direct-ink-writing (DIW) 3D printing functional composite materials based on supra-molecular interaction , 2021, Composites Science and Technology.

[10]  Mark W. Tibbitt,et al.  Hierarchical biomaterials via photopatterning-enhanced direct ink writing , 2021, Biofabrication.

[11]  Jiu-Jun Xu,et al.  Tribological performance and scuffing behaviors of several automobile piston rings mating with chrome-plated cylinder liner , 2021, Friction.

[12]  G. Cao,et al.  A universal strategy towards 3D printable nanomaterial inks for superior cellular high-loading battery electrodes , 2021, Journal of Materials Chemistry A.

[13]  Anesia D. Auguste,et al.  Additive-Manufactured Stochastic Polyimide Foams for Low Relative Permittivity, Lightweight Electronic Architectures. , 2021, ACS applied materials & interfaces.

[14]  A. Quigley,et al.  Printing between the Lines: Intricate Biomaterial Structures Fabricated via Negative Embodied Sacrificial Template 3D (NEST3D) Printing , 2021, Advanced Materials Technologies.

[15]  Michael C. McAlpine,et al.  3D-printed multifunctional materials enabled by artificial-intelligence-assisted fabrication technologies , 2020, Nature Reviews Materials.

[16]  Chao Zhang,et al.  Fluid-driven artificial muscles: bio-design, manufacturing, sensing, control, and applications , 2020 .

[17]  Jianzhong Fu,et al.  3D printing of high-strength chitosan hydrogel scaffolds without any organic solvents. , 2020, Biomaterials science.

[18]  A. Bonnin,et al.  Additive manufacturing of silica aerogels , 2020, Nature.

[19]  Qiang Zhang,et al.  3D printing of multi-scalable structures via high penetration near-infrared photopolymerization , 2020, Nature Communications.

[20]  Qiji Ze,et al.  Evolutionary Algorithm‐Guided Voxel‐Encoding Printing of Functional Hard‐Magnetic Soft Active Materials , 2020, Adv. Intell. Syst..

[21]  Alejandro H. Espera,et al.  Advances in 3D printing of thermoplastic polymer composites and nanocomposites , 2019, Progress in Polymer Science.

[22]  Mark A. Skylar-Scott,et al.  Voxelated soft matter via multimaterial multinozzle 3D printing , 2019, Nature.

[23]  B. L. Boada,et al.  New analysis and correlation between steady and oscillatory tests in fumed silica-based shear thickening fluids , 2019, Rheologica Acta.

[24]  Jae‐Woong Jeong,et al.  Advanced Soft Materials, Sensor Integrations, and Applications of Wearable Flexible Hybrid Electronics in Healthcare, Energy, and Environment , 2019, Advanced materials.

[25]  T. Long,et al.  Ultraviolet-Assisted Direct Ink Write to Additively Manufacture All-Aromatic Polyimides. , 2018, ACS applied materials & interfaces.

[26]  R. Mehta,et al.  Effect of addition of silicone oil on the rheology of fumed silica and polyethylene glycol shear thickening suspension , 2018 .

[27]  Chenyu Wang,et al.  Factors affecting the adhesion of ice to polymer substrates , 2018 .

[28]  J. R. Raney,et al.  Hybrid 3D Printing of Soft Electronics , 2017, Advanced materials.

[29]  Klas Hjort,et al.  PDMS‐Based Elastomer Tuned Soft, Stretchable, and Sticky for Epidermal Electronics , 2016, Advanced materials.

[30]  Xuanhe Zhao,et al.  Skin-inspired hydrogel–elastomer hybrids with robust interfaces and functional microstructures , 2016, Nature Communications.

[31]  Wei Huang,et al.  The lubricant retaining effect of micro-dimples on the sliding surface of PDMS , 2012 .

[32]  Nicolas Buchmann,et al.  Fabrication of rigid and flexible refractive-index-matched flow phantoms for flow visualisation and optical flow measurements , 2012 .

[33]  D. Higgins,et al.  Single-molecule studies of oligomer extraction and uptake of dyes in poly(dimethylsiloxane) films. , 2009, Analytical chemistry.

[34]  K. Zimmer,et al.  Investigation of the separation of 3D-structures with undercuts , 2007 .

[35]  S. Bahadur.  The development of transfer layers and their role in polymer tribology , 2000 .

[36]  M. E. Ryan,et al.  Rheological Behavior of Filled Polymeric Systems II. The Effect of a Bimodal Size Distribution of Particulates , 1988 .

[37]  D. C. Marcus.  Transepithelial electrical potential of nonsensory region of gerbil utricle in vitro. , 1986, The American journal of physiology.

[38]  Craig E. Banks,et al.  Future of additive manufacturing: Overview of 4D and 3D printed smart and advanced materials and their applications , 2021 .