A novel method to eliminate the bending-induced collapse of hexagonal honeycomb

[1]  J. Simon,et al.  Crushing behavior of curved Nomex honeycombs under combined shear-compression loads , 2022, International Journal of Mechanical Sciences.

[2]  Z. Dong,et al.  A fast self-calibration method of line laser sensors for on-machine measurement of honeycomb cores , 2022, Optics and lasers in engineering.

[3]  P. Feng,et al.  A force-insensitive impedance compensation method for giant magnetostriction ultrasonic cutting system of Nomex honeycomb composites , 2022, Composite Structures.

[4]  G. Fang,et al.  Uncertainty modelling and multiscale simulation of woven composite twisted structure , 2022, Composites Science and Technology.

[5]  H. Luo,et al.  Experimental and numerical study on the constrained bending-induced collapse of hexagonal honeycomb , 2021 .

[6]  Chaoming Sun,et al.  The Variation Mechanism of Core Pressure and Its Influence on the Surface Quality of Honeycomb Sandwich Composite with Thin Facesheets , 2021, Journal of Materials Research and Technology.

[7]  Chang Qi,et al.  Advanced honeycomb designs for improving mechanical properties: A review , 2021, Composites Part B: Engineering.

[8]  Wanfu Zhang,et al.  Numerical investigation on leakage and rotordynamic performance of the honeycomb seal with swirl-reverse rings , 2021, Chinese Journal of Aeronautics.

[9]  K. Zhou,et al.  Uncertainty Analysis of Curing-Induced Dimensional Variability of Composite Structures Utilizing Physics-Guided Gaussian Process Meta-modeling , 2021, Composite Structures.

[10]  C. Yang,et al.  In-plane shear response of a composite hexagonal honeycomb core under large deformation – A numerical and experimental study , 2021, Composite Structures.

[11]  C. Yang,et al.  Anisotropic hyperelastic constitutive modeling of in-plane finite deformation responses of commercial composite hexagonal honeycombs , 2021, Journal of Sandwich Structures & Materials.

[12]  S. Advani,et al.  A bond-line porosity model that integrates fillet shape and prepreg facesheet consolidation during equilibrated co-cure of sandwich composite structures , 2020 .

[13]  Hongyong Jiang,et al.  Core reinforcement design for improving flexural energy-absorption of corrugated sandwich composite structure , 2020 .

[14]  Jianfu Zhang,et al.  Processing technologies for Nomex honeycomb composites (NHCs): A critical review , 2020 .

[15]  W. Cantwell,et al.  Process induced deformations in composite sandwich panels using an in-homogeneous layup design , 2020 .

[16]  Zhiyong Zhao,et al.  A progressive approach to predict shot peening process parameters for forming integral panel of Al7050-T7451 , 2020 .

[17]  Olivier Gibaru,et al.  Geometrical error improvement of Aramid honeycomb workpieces in robot-based triangular knife ultrasonic cutting process , 2020, The International Journal of Advanced Manufacturing Technology.

[18]  Bruno Castanié,et al.  Review of composite sandwich structure in aeronautic applications , 2020, Composites Part C: Open Access.

[19]  Kamran Alam Khan,et al.  Process-induced deformation in U-shaped honeycomb aerospace composite structures , 2020 .

[20]  Wanzhong Zhao,et al.  On the out-of-plane ballistic performances of hexagonal, reentrant, square, triangular and circular honeycomb panels , 2020 .

[21]  S. Advani,et al.  Porosity predictions during co-cure of honeycomb core prepreg sandwich structures , 2020 .

[22]  G. Lu,et al.  A review of recent research on bio-inspired structures and materials for energy absorption applications , 2020 .

[23]  Ping Zou,et al.  Study on ultrasonic vibration–assisted cutting of Nomex honeycomb cores , 2019, The International Journal of Advanced Manufacturing Technology.

[24]  Cengiz Baykasoglu,et al.  An experimental study on the compressive response of CFRP honeycombs with various cell configurations , 2019, Composites Part B: Engineering.

[25]  Y. Guo,et al.  Finite element analysis on the out-of-plane compression for paper honeycomb , 2018, The Journal of Strain Analysis for Engineering Design.

[26]  S. Nutt,et al.  In Situ Observations and Pressure Measurements for Autoclave Co-Cure of Honeycomb Core Sandwich Structures , 2017 .

[27]  F. Scarpa,et al.  Morphing nacelle inlet lip with pneumatic actuators and a flexible nano composite sandwich panel , 2015 .

[28]  Feng Jin,et al.  Bioinspired engineering of honeycomb structure – Using nature to inspire human innovation , 2015 .

[29]  Farhan Gandhi,et al.  Flexible Skins for Morphing Aircraft Using Cellular Honeycomb Cores , 2010 .

[30]  Andrew Alderson,et al.  The in-plane linear elastic constants and out-of-plane bending of 3-coordinated ligament and cylinder-ligament honeycombs , 2010 .

[31]  Z. Dong,et al.  Robust cell wall recognition of laser measured honeycomb cores based on corner type identification , 2021 .

[32]  Steven Nutt,et al.  Process diagnostics for co-cure of sandwich structures using in situ visualization , 2019, Composites Part A: Applied Science and Manufacturing.

[33]  Dai-Heng Chen,et al.  Bending deformation of honeycomb consisting of regular hexagonal cells , 2011 .

[34]  Kenneth E. Evans,et al.  The design of doubly curved sandwich panels with honeycomb cores , 1991 .