Sensor and actuator integrated low-profile robotic origami

The robotic origami (Robogami) is a low-profile, sheet-like robot with multi degrees-of-freedom (DoF) that embeds different functional layers. Due to its planar form, it can take advantage of precise 2D fabrication methods usually reserved for micro and nano systems. Not only can these methods reduce fabrication time and expenses, by offering a high precision, they enable us to integrate actuators, sensors and electronic components into a thin sheet. In this research, we study sensors, actuators and fabrication methods for Robogami which can reconfigure into various forms. Our main objective is to develop technologies that can be easily applied to Robogamis consisting of many active folds and DoFs. In this paper, after studying the performance of the proposed sensors and actuators in one fold, we use a design for a crawler robot consisting of four folds to assess the performance of these technologies.

[1]  Kyu-Jin Cho,et al.  Flea-Inspired Catapult Mechanism for Miniature Jumping Robots , 2012, IEEE Transactions on Robotics.

[2]  George J. Weng,et al.  A self-consistent model for the stress-strain behavior of shape-memory alloy polycrystals , 1998 .

[3]  Byoungkwon An,et al.  Programming and controlling self-folding robots , 2012, 2012 IEEE International Conference on Robotics and Automation.

[4]  Robert J. Wood,et al.  Stretchable circuits and sensors for robotic origami , 2011, 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[5]  C. Laschi,et al.  Development of the functional unit of a completely soft octopus-like robotic arm , 2012, 2012 4th IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob).

[6]  K. Hata,et al.  A stretchable carbon nanotube strain sensor for human-motion detection. , 2011, Nature nanotechnology.

[7]  Robert J. Wood,et al.  Towards printable robotics: Origami-inspired planar fabrication of three-dimensional mechanisms , 2011, 2011 IEEE International Conference on Robotics and Automation.

[8]  Erik D. Demaine,et al.  A Universal Crease Pattern for Folding Orthogonal Shapes , 2009, ArXiv.

[9]  Akio Ishiguro,et al.  SheetBot: A magic carpet that enables scaffold-based locomotion , 2012, 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[10]  R. Wood,et al.  Robotic origamis : self-morphing modular robots , 2011 .

[11]  G. Whitesides,et al.  Elastomeric Origami: Programmable Paper‐Elastomer Composites as Pneumatic Actuators , 2012 .

[12]  R. Wood,et al.  A bidirectional shape memory alloy folding actuator , 2012 .

[13]  Robert J. Wood,et al.  Robot self-assembly by folding: A printed inchworm robot , 2013, 2013 IEEE International Conference on Robotics and Automation.

[14]  Koryo Miura,et al.  Method of Packaging and Deployment of Large Membranes in Space , 1985 .

[15]  H Tanaka,et al.  Programmable matter by folding , 2010, Proceedings of the National Academy of Sciences.

[16]  Robert J. Wood,et al.  Soft curvature sensors for joint angle proprioception , 2011, 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[17]  R. Wood,et al.  A novel low-profile shape memory alloy torsional actuator , 2010 .

[18]  Clément Gosselin,et al.  Characterization of the electrical resistance of carbon-black-filled silicone: Application to a flexible and stretchable robot skin , 2010, 2010 IEEE International Conference on Robotics and Automation.

[19]  H. Shea,et al.  Flexible and stretchable electrodes for dielectric elastomer actuators , 2012, Applied Physics A.

[20]  Shuichi Wakimoto,et al.  Intelligent FMA using flexible displacement sensor with paste injection , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..