Numerical modeling of ventilated wall cavities with spray evaporative cooling system

Abstract Envelope systems are the main contributors to the energy consumption associated to cooling or heating buildings. There have been significant research efforts to improve the performance of building envelope systems by integrating passive cooling strategies to reduce cooling loads and maintain acceptable indoor thermal comfort. The ventilated wall cavity system is one of these passive-cooling strategies that have received considerable attention recently due to the significant benefits of reducing thermal loads of buildings. In particular, evaporative cooling inside ventilated wall cavities is an attractive passive cooling technique especially in hot and dry climates. This paper presents the initial findings of a current research study focusing on improving the ventilated wall cavity with spray evaporative cooling system that produce fine water droplets. Specifically, this paper describes a numerical modeling approach to evaluate the performance of the proposed passive cooling system to cool buildings in hot and dry climates. The simulation results suggest that a significant reduction in cooling loads can be achieved since the wall cavity can absorb heat from the indoor and outdoor while inducing acceptable supply air temperature capable of maintaining indoor thermal comfort within buildings.

[1]  B. J. Vickery,et al.  Evaluation of pressure coefficients and estimation of air flow rates in buildings employing wind towers , 1986 .

[2]  R Lamberts,et al.  Modelling spray vaporization for evaporative cooling of buildings , 2004 .

[3]  Daeho Kang.  Advances in the application of passive down-draft evaporative cooling technology in the cooling of buildings , 2011 .

[4]  W. A. Cunningham,et al.  Establish feasibility for providing passive cooling with solar updraft and evaporative downdraft chimneys. Final report, June 15, 1984--December 31, 1987 , 1987 .

[5]  J. R. Camargo,et al.  A MATHEMATICAL MODEL FOR DIRECT EVAPORATIVE COOLING AIR CONDITIONING SYSTEM , 2003 .

[6]  Moncef Krarti,et al.  Evaluation of Passive Cooling Systems for Residential Buildings in the Kingdom of Saudi Arabia , 2016 .

[7]  Marco D’Orazio,et al.  Energy performance evaluation of a novel evaporative cooling technique , 2010 .

[8]  Experimental validation of a thermal model of an evaporative cooling system , 1984 .

[9]  Suoying He,et al.  Numerical simulation of water spray for pre-cooling of inlet air in natural draft dry cooling towers , 2013 .

[10]  Julian C. R. Hunt,et al.  Induced air velocity within droplet driven sprays , 1994, Proceedings of the Royal Society of London. Series A: Mathematical and Physical Sciences.

[11]  Onorio Saro,et al.  Numerical analysis of heat and mass transfer in a passive building component cooled by water evaporation , 2002 .

[12]  Refrigerating.  ASHRAE handbook of fundamentals , 1967 .

[13]  Sahar N. Kharrufa,et al.  Upgrading the building envelope to reduce cooling loads , 2012 .

[14]  Hamid Saffari,et al.  Two-phase Euler-Lagrange CFD simulation of evaporative cooling in a Wind Tower , 2009 .

[15]  L. Pires,et al.  Experimental study of an innovative element for passive cooling of buildings , 2013 .

[16]  M. Aboulnaga.  A roof solar chimney assisted by cooling cavity for natural ventilation in buildings in hot arid climates: An energy conservation approach in Al-Ain city , 1998 .

[17]  Mehdi Maerefat,et al.  NATURAL COOLING OF STAND-ALONE HOUSES USING SOLAR CHIMNEY AND EVAPORATIVE COOLING CAVITY , 2010 .

[18]  Francis Allard,et al.  Modeling of water spray evaporation: Application to passive cooling of buildings , 2006 .

[19]  Richard Karl Strand,et al.  Modeling of simultaneous heat and mass transfer within passive down-draft evaporative cooling (PDEC) towers with spray in FLUENT , 2013 .

[20]  Mehdi N. Bahadori,et al.  An improved design of wind towers for natural ventilation and passive cooling , 1985 .

[21]  M. Krarti,et al.  Experimental validation of a numerical model for ventilated wall cavity with spray evaporative cooling systems for hot and dry climates , 2016 .

[22]  C. W Newberry,et al.  Wind loading handbook , 1974 .

[23]  J. Palyvos.  A survey of wind convection coefficient correlations for building envelope energy systems’ modeling , 2008 .

[24]  Gerard M. Faeth,et al.  Current status of droplet and liquid combustion , 1977 .

[25]  G. McBain.  Heat and mass transfer across tall cavities filled with gas-vapour mixtures: the fully developed regime , 1998 .

[26]  Kwang Woo Kim,et al.  An experimental study on airflow in the cavity of a ventilated roof , 2009 .

[27]  Elaine S. Oran,et al.  Detailed modelling of combustion systems , 1981 .

[28]  G. Faeth.  Evaporation and combustion of sprays , 1983 .

[29]  F. Marcondes,et al.  Analytical solution for the simultaneous heat and mass transfer problem in air washers , 2011 .

[30]  Norbert Lechner,et al.  Heating, Cooling, Lighting: Sustainable Design Methods for Architects , 2008 .

[31]  B. Givoni.  Passive and Low Energy Cooling of Buildings , 1994 .

[32]  H. Montazeri,et al.  Evaporative cooling by water spray systems: CFD simulation, experimental validation and sensitivity analysis , 2015 .

[33]  Geoffrey P. Hammond,et al.  Improved data correlations for buoyancy-driven convection in rooms , 1983 .

[34]  Takahiko Miyazaki,et al.  The cooling performance of a building integrated evaporative cooling system driven by solar energy , 2011 .

[35]  Gian Luca Morini,et al.  Empirical validation and modelling of a naturally ventilated rainscreen faade building , 2011 .

[36]  W. Sirignano,et al.  Fluid Dynamics and Transport of Droplets and Sprays , 1999 .

[37]  Jie Zhu,et al.  Review of passive solar heating and cooling technologies , 2010 .

[38]  Nader V. Chalfoun,et al.  Estimating the performance of natural draft evaporative coolers , 1994 .