An Experimental Study of Flame Kernel Evolution in Lean and Diluted Methane-Air Mixtures at Engine-Like Conditions

An experimental study was performed to investigate the flame kernel propagation and combustion characteristics of methane (CH4)-air mixture at spark-ignition (SI) engine-like conditions. Tests were performed in a constant-volume combustion vessel (CV) with a product engine spark plug mounted at the top to simulate the engine combustion chamber. In this work, the equivalence ratio of 0.7 for lean methane-air mixture was used as test fuel, and different levels of inert gas were introduced to simulate exhaust gas recirculation (EGR) as in actual engine operations. The visualization of flame kernel formation and flame propagation was performed with a schlieren optical system and flame propagation speed was measured and analyzed accordingly. Global combustion characteristics are acquired and analyzed by utilizing the pressure history of combustion events recorded by high speed and fast response pressure measurements. The flame kernel expansion rates have been reported with quiescent and turbulent conditions. Global combustion characteristics, such as heat release rate, cumulative heat release, and mass fraction burned (MFB) as functions of time, are also reported. The suppression effect of pressure on flame propagation showed the flame slowdown while turbulence played a significant role in changing the combustion mode of the flame kernel and shortened combustion duration. These sets of experimental work and measurements are expected to be useful for development and validation of computational fluid dynamic (CFD) codes that simulate combustion processes for combustion ignition processes inside SI engines.

[1]  D. Bradley,et al.  The development and structure of flame instabilities and cellularity at low Markstein numbers in explosions , 2000 .

[2]  Choongsik Bae,et al.  Effect of EGR on Combustion Development in a 1.9L DI Diesel Optical Engine , 1995 .

[3]  C. Sheppard,et al.  Effects of hydrogen addition on laminar and turbulent premixed methane and iso-octane–air flames , 2007 .

[4]  Seung Hyun Yoon,et al.  Effect of biofuels combustion on the nanoparticle and emission characteristics of a common-rail DI diesel engine , 2011 .

[5]  F. Egolfopoulos,et al.  Laminar flame speeds of methane-air mixtures under reduced and elevated pressures. Journal paper, 1985-1988 , 1989 .

[6]  S. R. Bell,et al.  Extension of the lean operating limit for natural gas fueling of a spark ignited engine using hydrogen blending , 1997 .

[7]  M. Çelik,et al.  Experimental determination of suitable ethanol–gasoline blend rate at high compression ratio for gasoline engine , 2008 .

[8]  Hameed Metghalchi,et al.  On flame kernel formation and propagation in premixed gases , 2010 .

[9]  Robert K. Cheng,et al.  The burning rate of premixed flames in moderate and intense turbulence , 2001 .

[10]  Vedat S. Arpaci,et al.  Spark ignition of propane-air mixtures near the minimum ignition energy: Part II. A model development , 1991 .

[11]  S. Turns.  An Introduction to Combustion: Concepts and Applications , 2000 .

[12]  J. Naber,et al.  Effects of Gas Density and Vaporization on Penetration and Dispersion of Diesel Sprays , 1996 .

[13]  K. Y..  Spark Ignition of Propane-Air Mixtures Near the Minimum Ignition Energy : Part I . An Experimental Study , 2003 .

[14]  Jeffrey Naber,et al.  The Impact of Spark Discharge Pattern on Flame Initiation in a Turbulent Lean and Dilute Mixture in a Pressurized Combustion Vessel , 2013 .

[15]  Rudolf Maly,et al.  Spark Ignition and Combustion in Four-Stroke Gasoline Engines , 2008 .

[16]  H. Roh,et al.  Effect of bioethanol as an alternative fuel on the emissions reduction characteristics and combustion stability in a spark ignition engine , 2009 .

[17]  John B. Heywood,et al.  Internal combustion engine fundamentals , 1988 .

[18]  M. Z. Haq,et al.  Laminar burning velocity and Markstein lengths of methane–air mixtures , 2000 .

[19]  Jeffrey Naber,et al.  PIV measurement and numerical simulation of fan-driven flow in a constant volume combustion vessel , 2014 .

[20]  Jonathan Dale,et al.  Application of high energy ignition systems to engines , 1997 .