Fiber optic sensor for continuous health monitoring in CFRP composite materials

An intensity modulated sensor, based on the microbending concept, has been incorporated in laminates produced from a C/epoxy prepreg. Pencil lead break tests (Hsu-Neilsen sources) and tensile tests have been performed on this material. In this research study, fibre optic sensors will be proven to offer an alternative for the robust piezoelectric transducers used for Acoustic Emission (AE) monitoring. The main emphasis has been put on the use of advanced signal processing techniques based on time-frequency analysis. The signal Short Time Fourier Transform (STFT) has been computed and several robust noise reduction algorithms, such as Wiener adaptive filtering, improved spectral subtraction filtering, and Singular Value Decomposition (SVD) -based filtering, have been applied. An energy and frequency -based detection criterion is put forward to detect transient signals that can be correlated with Modal Acoustic Emission (MAE) results and thus damage in the composite material. There is a strong indication that time-frequency analysis and the Hankel Total Least Squares (HTLS) method can also be used for damage characterization. This study shows that the signal from a quite simple microbend optical sensor contains information on the elastic energy released whenever damage is being introduced in the host material by mechanical loading. Robust algorithms can be used to retrieve and analyze this information.

[1]  Vincent J. Tekippe,et al.  Environmentally Insensitive Diaphragm Reflectance Pressure Transducer , 1983, Other Conferences.

[2]  Jan Kybic,et al.  Extended spectral subtraction , 1996, 1996 8th European Signal Processing Conference (EUSIPCO 1996).

[3]  J. W. Berthold,et al.  Historical review of microbend fiber-optic sensors , 1995 .

[4]  John P. Dakin,et al.  Factors affecting the embedding of optical fibre sensors in advanced composite structures , 1992 .

[5]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[6]  Hiroshi Tsuda,et al.  Damage monitoring of carbon-fibre-reinforced plastics using Michelson interferometric fibre-optic sensors , 1998 .

[7]  Raymond M. Measures,et al.  Optical fibre damage detection for an aircraft composite leading edge , 1990 .

[8]  Raymond M. Measures,et al.  Advances toward fiber optic based smart structures [also Erratum 31(4) 861-862 (Apr1992)] , 1992 .

[9]  S. Vanhuffel,et al.  Algorithm for time-domain NMR data fitting based on total least squares , 1994 .

[10]  C. K. Asawa,et al.  Microbending Fiber Optic Sensing , 1983, Other Conferences.

[11]  M. Gorman,et al.  Progress in Detecting Transverse Matrix Cracking Using Modal Acoustic Emission , 1998 .

[12]  D. Jensen,et al.  Performance of graphite/bismaleimide laminates with embedded optical fibers. I. Uniaxial tension , 1992 .

[13]  Martine Wevers,et al.  Continuous damage monitoring techniques for laminated composite materials , 1999 .

[14]  John G. Proakis,et al.  Digital Signal Processing: Principles, Algorithms, and Applications , 1992 .

[15]  Roger Davidson,et al.  Mechanical properties of composite materials containing embedded fiber-optic sensors , 1991, Other Conferences.

[16]  Martine Wevers,et al.  Optical and acoustic damage detection in laminated CFRP composite materials , 2000 .

[17]  G. N. Sage,et al.  The failure of optical fibres embedded in composite materials , 1988 .

[18]  Il-Bum Kwon,et al.  Simultaneous sensing of the strain and points of failure in composite beams with an embedded fiber optic Michelson sensor , 1998 .

[19]  Steve M. Ziola,et al.  Automated Source Identification Using Modal Acoustic Emission , 1997 .

[20]  Sabine Van Huffel,et al.  Spectral subtraction method applied to damage detection in composite materials with embedded optical fibers , 2001 .

[21]  Dietrich Marcuse,et al.  Mode conversion caused by surface imperfections of a dielectric slab waveguide , 1969 .

[22]  S. Boll,et al.  Suppression of acoustic noise in speech using spectral subtraction , 1979 .

[23]  Kent A. Murphy,et al.  Stabilized extrinsic fiber optic Fabry-Perot sensor for surface acoustic wave detection , 1991 .

[24]  Sabine Van Huffel,et al.  Enhanced resolution based on minimum variance estimation and exponential data modeling , 1993, Signal Process..

[25]  Kent A. Murphy,et al.  Extrinsic Fabry-Perot sensor for strain and crack opening displacement measurements from -200 to 900 degrees C , 1992 .

[26]  Martine Wevers,et al.  Static and dynamic testing of a quasi-isotropic composite with embedded optical fibres , 1999 .

[27]  Marc Moonen,et al.  A novel iterative signal enhancement algorithm for noise reduction in speech , 1998, ICSLP.

[28]  Kent A. Murphy,et al.  Optical fiber sensing technique for edge-induced and internal delamination detection in composites , 1995 .