Chapter 11 – Design for creep

[1]  David R Hayhurst,et al.  Estimates of the creep rupture lifetime of structures using the finite element method , 1975 .

[2]  Yoshiaki Yamada.  Research and development of inelastic analysis procedures for reactor component design in Japan , 1978 .

[3]  L. Bråthe,et al.  Estimation of Norton-Bailey parameters from creep rupture data , 1979 .

[4]  R. M. Goldhoff,et al.  A Method for Predicting Creep Data for Commercial Alloys on a Correlation Between Creep Strength and Rupture Strength , 1972 .

[5]  W. K. Sartory,et al.  Comparison of typical inelastic analysis predictions with benchmark problem experimental results , 1975 .

[6]  C. R. Ensign,et al.  A Quarter-Century of Progress in the Development of Correlation and Extrapolation Methods for Creep Rupture Data , 1979 .

[7]  K. Milička,et al.  The relation between minimum creep rate and time to fracture , 1976 .

[8]  A. G. Grindell,et al.  Thermal ratchetting in pipes subjected to intermittent thermal downshocks at elevated temperatures , 1974 .

[9]  Iain Le May,et al.  On the Minimum-Commitment Method for Correlation of Creep-Rupture Data , 1978 .

[10]  S. K. Mitra,et al.  Work hardening and recovery in creep , 1966, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[11]  Alan K. Miller,et al.  An Inelastic Constitutive Model for Monotonic, Cyclic, and Creep Deformation: Part I—Equations Development and Analytical Procedures , 1976 .

[12]  E. W. Hart.  Constitutive Relations for the Nonelastic Deformation of Metals , 1976 .

[13]  M. F. Ashby,et al.  On creep fracture by void growth , 1982 .

[14]  R. K. Penny,et al.  Some results of testing simple structures under constant and variable loading during creep , 1970 .

[15]  Deryle W. Lonsdale,et al.  Relationship between minimum creep rate and time to fracture for 2:%Cr-1%Mosteel , 1978 .

[16]  S. S. Manson,et al.  A General Approach to the Practical Solution of Creep Problems , 1959 .