Fabrication of High-κ Dielectric Metal Oxide Films on Topographically Patterned Substrates: Polymer Brush-Mediated Depositions

Fabrication of ultrathin films of dielectric (with particular reference to materials with high dielectric constants) materials has significance in many advanced technological applications including hard protective coatings, sensors, and next-generation logic devices. Current state-of-the-art in microelectronics for fabricating these thin films is a combination of atomic layer deposition and photolithography. As feature size decreases and aspect ratios increase, conformality of the films becomes paramount. Here, we show a polymer brush template-assisted deposition of highly conformal, ultrathin (sub 5 nm) high-κ dielectric metal oxide films (hafnium oxide and zirconium oxide) on topographically patterned silicon nitride substrates. This technique, using hydroxyl terminated poly-4-vinyl pyridine (P4VP-OH) as the polymer brush, allows for conformal deposition with uniform thickness along the trenches and sidewalls of the substrate. Metal salts are infiltrated into the grafted monolayer polymer brush films via solution deposition. Tailoring specific polymer interfacial chemistries for ion infiltration combined with subsequent oxygen plasma treatment enabled the fabrication of high-quality sub 5 nm metal oxide films.

[1]  R. Ruoff,et al.  Large‐Area Uniform 1‐nm‐Level Amorphous Carbon Layers from 3D Conformal Polymer Brushes. A “Next‐Generation” Cu Diffusion Barrier? , 2022, Advanced materials.

[2]  Chandan,et al.  Advancement and challenges in MOSFET scaling , 2021 .

[3]  H. Rhee,et al.  Combination of ultraviolet exposure and thermal post-treatment to obtain high quality HfO2 thin films , 2020 .

[4]  G. Hughes,et al.  Precise Definition of a "Monolayer Point" in Polymer Brush Films for Fabricating Highly Coherent TiO2 Thin Films by Vapor-Phase Infiltration. , 2020, Langmuir : the ACS journal of surfaces and colloids.

[5]  Xiaodong Wang,et al.  Fast fabrication of silicon nanopillar array using electron beam lithography with two-layer exposure method , 2020 .

[6]  K. Cao,et al.  Atomic level deposition to extend Moore’s law and beyond , 2020, International Journal of Extreme Manufacturing.

[7]  P. Uhlmann,et al.  Amphiphilic Block Copolymer Micelles in Selective Solvents: The Effect of Solvent Selectivity on Micelle Formation , 2019, Polymers.

[8]  M. Morris,et al.  Optimizing Polymer Brush Coverage To Develop Highly Coherent Sub-5 nm Oxide Films by Ion Inclusion , 2019, Chemistry of Materials.

[9]  M. Haga,et al.  Bio-inspired protonic memristor devices based on metal complexes with proton-coupled electron transfer. , 2019, Faraday discussions.

[10]  Justin G. Kennemur.  Poly(vinylpyridine) Segments in Block Copolymers: Synthesis, Self-Assembly, and Versatility , 2019, Macromolecules.

[11]  F. Roozeboom,et al.  Area-Selective Atomic Layer Deposition of ZnO by Area Activation Using Electron Beam-Induced Deposition , 2019, Chemistry of Materials.

[12]  Stephen M. Sirard,et al.  Area-selective atomic layer deposition of cobalt oxide to generate patterned cobalt films , 2019, Journal of Vacuum Science & Technology A.

[13]  W. Kessels,et al.  From the Bottom-Up: Toward Area-Selective Atomic Layer Deposition with High Selectivity† , 2018, Chemistry of materials : a publication of the American Chemical Society.

[14]  M. Waqas,et al.  P4VP–RuII(bda) polyelectrolyte–metal complex as water oxidation catalyst: on the unique slow-diffusion and multi-charge effects of the polyelectrolyte ligand , 2018, RSC advances.

[15]  M. Morris,et al.  Enabling Large-Area Selective Deposition on Metal-Dielectric Patterns using Polymer Brush Deactivation , 2018, The Journal of Physical Chemistry C.

[16]  B. T. Chan,et al.  Area-Selective Atomic Layer Deposition of TiN, TiO2, and HfO2 on Silicon Nitride with inhibition on Amorphous Carbon , 2018 .

[17]  Xichun Luo,et al.  Promising Lithography Techniques for Next-Generation Logic Devices , 2018 .

[18]  Yang Zhao,et al.  Molecular Layer Deposition for Energy Conversion and Storage , 2018 .

[19]  S. Bent,et al.  Area-Selective Atomic Layer Deposition of Metal Oxides on Noble Metals through Catalytic Oxygen Activation , 2017, Chemistry of materials : a publication of the American Chemical Society.

[20]  F. Roozeboom,et al.  Area-Selective Atomic Layer Deposition of SiO2 Using Acetylacetone as a Chemoselective Inhibitor in an ABC-Type Cycle , 2017, ACS nano.

[21]  M. Morris,et al.  Area Selective Polymer Brush Deposition. , 2017, Macromolecular rapid communications.

[22]  Parvaneh Mokarian-Tabari,et al.  Large Block Copolymer Self-Assembly for Fabrication of Subwavelength Nanostructures for Applications in Optics. , 2017, Nano letters.

[23]  S. Bent,et al.  Selective Deposition of Dielectrics: Limits and Advantages of Alkanethiol Blocking Agents on Metal-Dielectric Patterns. , 2016, ACS applied materials & interfaces.

[24]  Khrystyna Harhay,et al.  Temperature-responsive properties of poly(4-vinylpyridine) coatings: influence of temperature on the wettability, morphology, and protein adsorption , 2016 .

[25]  S. Bent,et al.  A Process for Topographically Selective Deposition on 3D Nanostructures by Ion Implantation. , 2016, ACS nano.

[26]  S. Bent,et al.  Improving area-selective molecular layer deposition by selective SAM removal. , 2014, ACS applied materials & interfaces.

[27]  O. Soppera,et al.  Direct nanopatterning of 100 nm metal oxide periodic structures by Deep-UV immersion lithography. , 2012, Optics letters.

[28]  M. Ritala,et al.  Passivation of copper surfaces for selective-area ALD using a thiol self-assembled monolayer , 2012 .

[29]  Seth B Darling,et al.  A route to nanoscopic materials via sequential infiltration synthesis on block copolymer templates. , 2011, ACS nano.

[30]  S. Maikap,et al.  Analysis of weakly bonded oxygen in HfO2/SiO2/Si stacks by using HRBS and ARXPS , 2010 .

[31]  S. Bent,et al.  Area-Selective ALD with Soft Lithographic Methods: Using Self-Assembled Monolayers to Direct Film Deposition , 2009 .

[32]  Peter Vanoppen,et al.  Novel approach for immersion lithography defectivity control to increase productivity , 2008, SPIE Advanced Lithography.

[33]  C. Hansen,et al.  Hansen Solubility Parameters : A User's Handbook, Second Edition , 2007 .

[34]  T. Shikama,et al.  X-ray photoelectron spectroscopic study on initial oxidation of hafnium hydride fractured in an ultra-high vacuum , 2007 .

[35]  M. Ritala,et al.  Self‐Assembled Octadecyltrimethoxysilane Monolayers Enabling Selective‐Area Atomic Layer Deposition of Iridium , 2006 .

[36]  Peidong Yang,et al.  Silicon Vertically Integrated Nanowire Field Effect Transistors , 2006 .

[37]  S. Bent,et al.  Achieving area-selective atomic layer deposition on patterned substrates by selective surface modification , 2005 .

[38]  Paul C. McIntyre,et al.  Self-assembled monolayer resist for atomic layer deposition of HfO2 and ZrO2 high-κ gate dielectrics , 2004 .

[39]  S. Seal,et al.  Nature of the use of adventitious carbon as a binding energy standard , 1995 .

[40]  C. Morant,et al.  An XPS study of the initial stages of oxidation of hafnium , 1990 .

[41]  R. W. Keyes,et al.  Miniaturization of electronics and its limits , 1988, IBM J. Res. Dev..

[42]  G. Parsons,et al.  Inherent substrate-dependent growth initiation and selective-area atomic layer deposition of TiO2 using “water-free” metal-halide/metal alkoxide reactants , 2016 .