Accounting for central and distributed zero liquid discharge options in interplant water network design

Brine and bittern waste streams are classified as a byproduct of seawater desalination operations, as well as many inorganic industries. As such, many of those industries are challenged to develop and implement sustainable, cost-effective strategies for managing water usage and wastewater discharge. As a result, zero liquid discharge goals have garnered a lot of interest for the purpose of enhancing strategies for wastewater handling. Zero liquid discharge may be achieved using a number of methods, including technologies through which industrial wastewater is reduced to dry solids/salts. This would mostly involve wastewater processing to brine water quality, using standard brine-producing wastewater treatment methods, followed by conventional zero liquid discharge techniques, which in turn transform brine wastewater to salts/bitterns. Salt sludge and bittern waste from zero liquid discharge processing have no adverse effects on the environment. Moreover, many techniques allow for the recovery of extra-purified water streams, as a result of wastewater-to-brine processing, and/or brine-to-salt processing. Recovered water streams may be directly reused, or even utilized to enhance the quality of other wastewater streams before reuse. Since compliance with stringent industrial wastewater regulations is through zero liquid discharge applications, this work discusses the incorporation of zero liquid discharge processing options onto interplant water network synthesis problems. Accounting for the presence of both central and distributed zero liquid discharge processing schemes enables the identification of cost-optimal interplant water networks, when stringent wastewater discharge requirements are imposed. This paper focuses on a specific class of water integration problems, which involve brine management. A case study is used to illustrate the proposed approach and to highlight the importance of accounting for zero liquid discharge considerations, to develop grassroots designs for interplant water networks. For a given industrial city layout, four different scenarios have been carried out, and each case was associated with certain wastewater discharge requirements. As a result, differing optimal interplant water network designs have been attained for each of the cases, which have been investigated.

[1]  Mahmoud M. El-Halwagi,et al.  Simultaneous synthesis of waste interception and material reuse networks: Problem reformulation for global optimization , 2005 .

[2]  M. Elimelech,et al.  The Future of Seawater Desalination: Energy, Technology, and the Environment , 2011, Science.

[3]  Uday V. Shenoy,et al.  Continuous targeting and network design for zero wastewater discharge in water system integration , 2015 .

[4]  Reza Parand,et al.  An automated composite table algorithm considering zero liquid discharge possibility in water regeneration–recycle network , 2016, Clean Technologies and Environmental Policy.

[5]  Coskun Aydiner,et al.  Techno-economic analysis of textile dye bath wastewater treatment by integrated membrane processes under the zero liquid discharge approach , 2012 .

[6]  R. Tan,et al.  A Superstructure Optimization Approach for Membrane Separation-Based Water Regeneration Network Synthesis with Detailed Nonlinear Mechanistic Reverse Osmosis Model , 2011 .

[7]  Patrick Linke,et al.  Water integration in industrial zones: a spatial representation with direct recycle applications , 2014, Clean Technologies and Environmental Policy.

[8]  Mahmoud M. El-Halwagi,et al.  Optimization of multi-effect distillation with brine treatment via membrane distillation and process heat integration , 2017 .

[9]  Sumit K. Bishnu,et al.  Multi-period carbon integration , 2016 .

[10]  K. Srithar,et al.  Prospects and scopes of solar pond: A detailed review , 2008 .

[11]  Patrick Linke,et al.  On the synthesis of carbon constrained natural gas monetization networks , 2017 .

[12]  Miguel J. Bagajewicz,et al.  On the appropriate modeling of process plant water systems , 2009 .

[13]  C. Deng,et al.  Optimal water network with zero wastewater discharge in an alumina plant , 2009 .

[14]  Klaus D. Timmerhaus,et al.  Plant design and economics for chemical engineers , 1958 .

[15]  Mahmoud M. El-Halwagi,et al.  A synthesis approach for industrial city water reuse networks considering central and distributed treatment systems , 2015 .

[16]  Mahmoud M. El-Halwagi,et al.  A shortcut approach to the design of once-through multi-stage flash desalination systems , 2017 .

[17]  Mahmoud M. El-Halwagi,et al.  RIGOROUS GRAPHICAL TARGETING FOR RESOURCE CONSERVATION VIA MATERIAL RECYCLE/REUSE NETWORKS , 2003 .

[18]  Mariano J. Savelski,et al.  On zero water discharge solutions in the process industry , 2004 .

[19]  B. Van der Bruggen,et al.  The challenge of zero discharge: from water balance to regeneration , 2006 .

[20]  C. Deng,et al.  Graphically based analysis of water system with zero liquid discharge , 2008 .

[21]  Dominic C.Y. Foo,et al.  Use cascade analysis to optimize water networks , 2006 .

[22]  Goen Ho,et al.  Towards zero liquid discharge: the use of water auditing to identify water conservation measures , 2014 .

[23]  Mahmoud M. El-Halwagi,et al.  Integration of Thermal Membrane Distillation Networks with Processing Facilities , 2014 .

[24]  E Broch,et al.  Feasibility of developing water service reservoirs in rock caverns in Singapore , 2004 .

[25]  Joseph G. Jacangelo,et al.  Treatment technologies for reverse osmosis concentrate volume minimization: A review , 2014 .

[26]  Dominic Chwan Yee Foo,et al.  Flowrate targeting for threshold problems and plant-wide integration for water network synthesis. , 2008, Journal of environmental management.