Thermal Performance of a Thin Flat Vapor Chamber with a Multiscale Wick Fabricated by Sac305/Sn58bi Micro-Sized Particles

[1]  Yangjun Zhang,et al.  A quasi-dynamic model and thermal analysis for vapor chambers with multiple heat sources based on thermal resistance network model , 2022, Case Studies in Thermal Engineering.

[2]  Qifei Jian,et al.  Thermal and hydraulic analysis of ultra-thin vapor chamber with copper columns considering Marangoni effect , 2022, International Journal of Heat and Mass Transfer.

[3]  Yuan Li,et al.  Effects of vapor duct thickness on the capillary blocking and thermal performance of ultra-thin vapor chambers under natural convection cooling , 2021 .

[4]  Yong Tang,et al.  Capillary performance characterization of porous sintered stainless steel powder wicks for stainless steel heat pipes , 2020 .

[5]  Y. Li,et al.  Research and optimization design of limited internal cavity of ultra-thin vapor chamber , 2020 .

[6]  Yong Tang,et al.  Experimental study on the capillary performance of aluminum micro-grooved wicks with reentrant cavity array , 2019, International Journal of Heat and Mass Transfer.

[7]  S. Jang,et al.  Effect of mesh wick geometry on the maximum heat transfer rate of flat-micro heat pipes with multi-heat sources and sinks. , 2018, International journal of heat and mass transfer.

[8]  Yong Tang,et al.  Influence of electrochemical deposition parameters on capillary performance of a rectangular grooved wick with a porous layer , 2017 .

[9]  Jong-Hyun Lee,et al.  Transformation of SAC (Sn3.0Ag0.5Cu) nanoparticles into bulk material during melting process with large melting-point depression , 2016 .

[10]  Lip Huat Saw,et al.  Numerical analyses on optimizing a heat pipe thermal management system for lithium-ion batteries during fast charging , 2015 .

[11]  L. Li.  Micro Flat Heat Pipes for Microelectronics Cooling: Review , 2013 .

[12]  Yong Tang,et al.  Effect of fabrication parameters on capillary performance of composite wicks for two-phase heat transfer devices , 2013 .

[13]  S. Kim,et al.  Fabrication and Characterization of the Capillary Performance of Superhydrophilic Cu Micropost Arrays , 2010, Journal of Microelectromechanical Systems.

[14]  Frédéric Lefèvre,et al.  Coupled thermal and hydrodynamic models of flat micro heat pipes for the cooling of multiple electronic components , 2006 .

[15]  Brian M. Holley,et al.  Permeability and effective pore radius measurements for heat pipe and fuel cell applications , 2006 .

[16]  W. Qin,et al.  Liquid flow in the anisotropic wick structure of a flat plate heat pipe under block-heating condition , 1997 .

[17]  Xiao-Yang Huang,et al.  The pressure and velocity fields in the wick structure of a localized heated flat plate heat pipe , 1996 .

[18]  Rui Zhao,et al.  An experimental study of heat pipe thermal management system with wet cooling method for lithium ion batteries , 2015 .

[19]  Yong Tang,et al.  Characterization of capillary performance of composite wicks for two-phase heat transfer devices , 2013 .

[20]  Zhonghao Rao,et al.  Experimental investigation on thermal management of electric vehicle battery with heat pipe , 2013 .