Exploring Metal Electroplating for Energy Storage by Quartz Crystal Microbalance: A Review

The development and application of Electrochemical Quartz Crystal Microbalance (EQCM) sensing to study metal electroplating, especially for energy storage purposes, are reviewed. The roles of EQCM in describing electrode/electrolyte interface dynamics, such as the electric double‐layer build‐up, ionic/molecular adsorption, metal nucleation, and growth, are addressed. Modeling of the QCM sensor is introduced and its importance is emphasized. Challenges of metal electrode use, including side reactions and dendrite formation, along with their mitigation strategies are reviewed. Numerous factors affecting the electroplating processes, such as electrolyte composition, additives, temperature, and current density, and their influence on the electroplated metals’ mass, structural, and mechanical characteristics are discussed. Looking forward, the need for deeper fundamental understanding and advancing simulations of the QCM signal response as a result of electroplating metal nanostructures is stressed. Further development and integration of innovative EQCM‐strategies will provide unique future means to fundamentally understand and optimize metal electroplating for energy storage and application alike.

[1]  K. Edström,et al.  Automated electrolyte formulation and coin cell assembly for high-throughput lithium-ion battery research , 2023, Digital Discovery.

[2]  Erik J. Berg,et al.  Revealing the Structural Evolution of Electrode/Electrolyte Interphase Formation during Magnesium Plating and Stripping with operando EQCM-D. , 2023, ChemSusChem.

[3]  D. Johannsmann,et al.  Stiffness of Contacts between Adsorbed Particles and the Surface of a QCM‐D Inferred from the Adsorption Kinetics and a Frequency‐Domain Lattice Boltzmann Simulation , 2023, Advanced Theory and Simulations.

[4]  Han Yang,et al.  Interfacial Molecule Engineering for Reversible Zn Electrochemistry , 2023, ACS Energy Letters.

[5]  L. Trahey,et al.  Effect of Salt Concentration on the Interfacial Solvation Structure and Early Stage of Solid-Electrolyte Interphase Formation in Ca(BH4)2/THF for Ca Batteries. , 2023, ACS applied materials & interfaces.

[6]  Yuezhou Wei,et al.  Study of Indium electrodeposition and nucleation mechanism in acidic solution using EQCM , 2023, Electrochimica Acta.

[7]  D. Johannsmann,et al.  Particle Fouling at Hot Reactor Walls Monitored In-Situ with a QCM-D and Modeled with the Frequency-Domain Lattice Boltzmann Method , 2023, Results in Physics.

[8]  A. Leshansky,et al.  Excess shear force exerted on an oscillating plate due to a nearby particle , 2022, Physical Review Fluids.

[9]  Niya Sa,et al.  Evolution of the Dynamic Solid Electrolyte Interphase in Mg Electrolytes for Rechargeable Mg-Ion Batteries. , 2022, ACS applied materials & interfaces.

[10]  K. Murase,et al.  Macroscopically uniform and flat lithium thin film formed by electrodeposition using multicomponent additives , 2022, Electrochemistry Communications.

[11]  Jared M. Mitchell,et al.  Autonomous optimization of non-aqueous Li-ion battery electrolytes via robotic experimentation and machine learning coupling , 2021, Nature Communications.

[12]  C. Behling,et al.  Formation of lithiated gold and its use for the preparation of reference electrodes — an EQCM study , 2021, Journal of Solid State Electrochemistry.

[13]  I. Efimov,et al.  Amidine-based ionic liquid analogues with AlCl3: a credible new electrolyte for rechargeable Al batteries. , 2021, Chemical communications.

[14]  O. Höfft,et al.  A Modulation QCM Applied to Copper Electrodeposition and Stripping , 2021, Electroanalysis.

[15]  G. Brenner,et al.  Soft Viscoelastic Particles in Contact with a Quartz Crystal Microbalance (QCM): A Frequency-Domain Lattice Boltzmann Simulation. , 2021, Analytical chemistry.

[16]  Christian Leppin,et al.  Studying Soft Interfaces with Shear Waves: Principles and Applications of the Quartz Crystal Microbalance (QCM) , 2021, Sensors.

[17]  Niya Sa,et al.  In Situ Probing of Mass Exchange at the Solid Electrolyte Interphase in Aqueous and Nonaqueous Zn Electrolytes with EQCM-D. , 2021, ACS applied materials & interfaces.

[18]  D. Johannsmann,et al.  Kinetics of viscoelasticity in the electric double layer following steps in the electrode potential studied by a fast electrochemical quartz crystal microbalance (EQCM). , 2021, The Analyst.

[19]  Yong Lu,et al.  Exploring the Interfacial Chemistry between Zinc Anodes and Aqueous Electrolytes via an In Situ Visualized Characterization System. , 2020, ACS applied materials & interfaces.

[20]  Haoshen Zhou,et al.  In-situ/operando characterization techniques in lithium-ion batteries and beyond , 2020, Journal of Energy Chemistry.

[21]  Kazuki Yoshii,et al.  Effects of Film Formation on the Electrodeposition of Lithium , 2020 .

[22]  X. Xie,et al.  FEM simulation and frequency shift calculation of a quartz crystal resonator adhered with soft micro-particulates considering contact deformation , 2020, IOP Conference Series: Materials Science and Engineering.

[23]  Laura L. E. Mears,et al.  Adsorption and Diffusion Moderated by Polycationic Polymers during Electrodeposition of Zinc , 2020, ACS applied materials & interfaces.

[24]  R. Delgado‐Buscalioni,et al.  Load impedance of immersed layers on the quartz crystal microbalance: a comparison with colloidal suspensions of spheres. , 2020, Langmuir : the ACS journal of surfaces and colloids.

[25]  杨凯,et al.  EQCM for In-depth Study of Metal Anodes for Electrochemical Energy Storage , 2020 .

[26]  E. Gizeli,et al.  Hydrodynamics of Quartz-Crystal-Microbalance DNA Sensors Based on Liposome Amplifiers , 2020, Physical Review Applied.

[27]  Stefano Ermon,et al.  Closed-loop optimization of fast-charging protocols for batteries with machine learning , 2020, Nature.

[28]  G. Rothenberg,et al.  Beyond Lithium-Based Batteries , 2020, Materials.

[29]  Gilles Louppe,et al.  The frontier of simulation-based inference , 2019, Proceedings of the National Academy of Sciences.

[30]  Reed M. Wittman,et al.  Elucidating mechanisms of oxide growth and surface passivation on zinc thin film electrodes in alkaline solutions using the electrochemical quartz crystal microbalance , 2019, Journal of Power Sources.

[31]  M. Cheng,et al.  Effects of transition metal cation additives on the passivation of lithium metal anode in Li–S batteries , 2019, Electrochimica Acta.

[32]  J. Gregoire,et al.  Progress and prospects for accelerating materials science with automated and autonomous workflows , 2019, Chemical science.

[33]  N. Ivanova,et al.  A QCM-based assay of drug content in Eudragit RS 100-based delivery systems. , 2019, Talanta.

[34]  Shoichi Matsuda,et al.  High-throughput combinatorial screening of multi-component electrolyte additives to improve the performance of Li metal secondary batteries , 2019, Scientific Reports.

[35]  Xin-bo Zhang,et al.  Alkali Metal Anodes for Rechargeable Batteries , 2019, Chem.

[36]  Erik J. Berg,et al.  Operando EQCM-D with Simultaneous in Situ EIS: New Insights into Interphase Formation in Li Ion Batteries. , 2018, Analytical chemistry.

[37]  A. Gewirth,et al.  Raman and QCM Studies of PPG and PEG Adsorption on Cu Electrode Surfaces , 2018 .

[38]  Pu Chen,et al.  Surface Adsorption of Polyethylene Glycol to Suppress Dendrite Formation on Zinc Anodes in Rechargeable Aqueous Batteries , 2018, ChemElectroChem.

[39]  D. Aurbach,et al.  In Situ Acoustic Diagnostics of Particle-Binder Interactions in Battery Electrodes , 2018 .

[40]  Joshua A. Jackman,et al.  A Numerical Study on the Effect of Particle Surface Coverage on the Quartz Crystal Microbalance Response. , 2018, Analytical chemistry.

[41]  D. Aurbach,et al.  In Situ Real-Time Mechanical and Morphological Characterization of Electrodes for Electrochemical Energy Storage and Conversion by Electrochemical Quartz Crystal Microbalance with Dissipation Monitoring. , 2018, Accounts of chemical research.

[42]  K. S. Smaran,et al.  Anion-Dependent Potential Precycling Effects on Lithium Deposition/Dissolution Reaction Studied by an Electrochemical Quartz Crystal Microbalance. , 2017, The journal of physical chemistry letters.

[43]  D. Aurbach,et al.  In Situ Porous Structure Characterization of Electrodes for Energy Storage and Conversion by EQCM-D: a Review , 2017 .

[44]  Jun Lu,et al.  State-of-the-art characterization techniques for advanced lithium-ion batteries , 2017, Nature Energy.

[45]  Ketack Kim,et al.  Observation of electrochemical reactions at Zn electrodes in Zn-air secondary batteries , 2016 .

[46]  D. Aurbach,et al.  Electrochemical Quartz Crystal Microbalance with Dissipation Real-Time Hydrodynamic Spectroscopy of Porous Solids in Contact with Liquids. , 2016, Analytical chemistry.

[47]  T. Fukutsuka,et al.  Influence of surfactants as additives to electrolyte solutions on zinc electrodeposition and potential oscillation behavior , 2016, Journal of Applied Electrochemistry.

[48]  Alar Jänes,et al.  In situ hydrodynamic spectroscopy for structure characterization of porous energy storage electrodes. , 2016, Nature materials.

[49]  Lei Chen,et al.  Modulation of dendritic patterns during electrodeposition: A nonlinear phase-field model , 2015 .

[50]  Rohan Akolkar,et al.  Suppressing Dendritic Growth during Alkaline Zinc Electrodeposition using Polyethylenimine Additive , 2015 .

[51]  Gunther Brenner,et al.  Frequency Shifts of a Quartz Crystal Microbalance Calculated with the Frequency-Domain Lattice-Boltzmann Method: Application to Coupled Liquid Mass. , 2015, Analytical chemistry.

[52]  K. Kondo,et al.  Electrochemical study of multi-component additive behavior during copper electrodeposition with a microfluidic device and an electrochemical quartz crystal microbalance , 2015 .

[53]  Yang-Kook Sun,et al.  Understanding the behavior of Li–oxygen cells containing LiI , 2015 .

[54]  D. Johannsmann,et al.  Stiffness of sphere–plate contacts at MHz frequencies: dependence on normal load, oscillation amplitude, and ambient medium , 2015, Beilstein journal of nanotechnology.

[55]  K. Kubota,et al.  Lithium Redox in Imidazolium Ionic Liquids Composed of Five-Membered Cyclic Amide , 2014 .

[56]  Karl S. Ryder,et al.  Application of the combined electrochemical quartz crystal microbalance and probe beam deflection technique in deep eutectic solvents , 2014 .

[57]  D. Johannsmann.  The Quartz Crystal Microbalance in Soft Matter Research: Fundamentals and Modeling , 2014 .

[58]  R. Antaño-López,et al.  Study of the Role of Boric Acid During the Electrochemical Deposition of Ni in a Sulfamate Bath , 2013, International Journal of Electrochemical Science.

[59]  D. Aurbach,et al.  Quartz crystal impedance response of nonhomogenous composite electrodes in contact with liquids. , 2011, Analytical chemistry.

[60]  John E Sader,et al.  Lattice Boltzmann method for oscillatory Stokes flow with applications to micro- and nanodevices. , 2010, Physical review. E, Statistical, nonlinear, and soft matter physics.

[61]  V. G. Celante,et al.  Electrodeposition of copper from spent Li-ion batteries by electrochemical quartz crystal microbalance and impedance spectroscopy techniques , 2010 .

[62]  J. J. García-Jareño,et al.  An electromechanical perspective on the metal/solution interfacial region during the metallic zinc electrodeposition , 2009 .

[63]  Emma L. Smith,et al.  Time resolved in situ liquid atomic force microscopy and simultaneous acoustic impedance electrochemical quartz crystal microbalance measurements: a study of Zn deposition. , 2009, Analytical chemistry.

[64]  A. Abbott,et al.  Electrolytic deposition of Zn coatings from ionic liquids based on choline chloride , 2009 .

[65]  J. Hihn,et al.  Influence of organic additives on the initial stages of copper electrodeposition on polycrystalline platinum , 2009 .

[66]  L. Schultz,et al.  Nucleation and growth of the electrodeposited iron layers in the presence of an external magnetic field , 2008 .

[67]  D. Johannsmann,et al.  Effect of sample heterogeneity on the interpretation of QCM(-D) data: comparison of combined quartz crystal microbalance/atomic force microscopy measurements with finite element method modeling. , 2008, Analytical chemistry.

[68]  E. Fachini,et al.  Nanostructured copper thin film used for catalysis , 2008 .

[69]  Antonio Arnau,et al.  A Review of Interface Electronic Systems for AT-cut Quartz Crystal Microbalance Applications in Liquids , 2008, Sensors.

[70]  Antonio J. Martín,et al.  Electrochemical quartz crystal microbalance study of the electrodeposition of Co, Pt and Pt–Co alloy , 2007 .

[71]  A. Bund,et al.  Electrodeposition of Al in 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)amide and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ionic liquids: in situ STM and EQCM studies. , 2007, The journal of physical chemistry. B.

[72]  J. C. Ballesteros,et al.  Zinc electrodeposition in the presence of polyethylene glycol 20000 , 2007 .

[73]  R. Champion,et al.  Nucleation and crystal growth of zirconium molybdate hydrate in nitric acid , 2007 .

[74]  B. Tribollet,et al.  Nucleation-growth process of scale electrodeposition—Influence of the mass transport , 2006 .

[75]  J. J. García-Jareño,et al.  Electrochemical Quartz Crystal Microbalance Study of Copper Electrochemical Reaction in Acid Medium Containing Chlorides , 2006 .

[76]  Xiao-Feng Tang,et al.  A study of the film formation kinetics on zinc in different acidic corrosion inhibitor solutions by quartz crystal microbalance , 2005 .

[77]  E. Chassaing,et al.  Characterisation of electrodeposited nanocrystalline Ni–Mo alloys , 2004 .

[78]  L. Trnková,et al.  Application of elimination voltammetry in the study of electroplating processes on the graphite electrode , 2004 .

[79]  K. Kondo,et al.  Role of Additives for Copper Damascene Electrodeposition Experimental Study on Inhibition and Acceleration Effects , 2004 .

[80]  Su-Moon Park,et al.  Effects of organic additives on zinc electrodeposition at iron electrodes studied by EQCM and in situ STM. , 2004, Langmuir : the ACS journal of surfaces and colloids.

[81]  J. J. García-Jareño,et al.  EQCM and EIS studies of Znaq2++2e−⇄Zn0 electrochemical reaction in moderated acid medium , 2003 .

[82]  J. Friedt,et al.  Simultaneous AFM and QCM Measurements Methodology Validation Using Electrodeposition , 2003 .

[83]  H. Honma,et al.  Advanced copper electroplating for application of electronics , 2003 .

[84]  Kwang‐Bum Kim,et al.  A study on effect of hydrogen reduction reaction on the initial stage of Ni electrodeposition using EQCM , 2003 .

[85]  James W. Evans,et al.  Characterization of the SEI on a Carbon Film Electrode by Combined EQCM and Spectroscopic Ellipsometry , 2003 .

[86]  T. Takamura.  Trends in advanced batteries and key materials in the new century , 2002 .

[87]  John R. Williams,et al.  Structure and magnetic properties of electrodeposited Ni films on n-GaAs(001) , 2002 .

[88]  P. Kohl,et al.  Investigation of the Lithium Couple on Pt, Al, and Hg Electrodes in Lithium Imide-Ethyl Methyl Sulfone , 2002 .

[89]  A. Bund,et al.  Combining AFM and EQCM for the in situ investigation of surface roughness effects during electrochemical metal depositions , 2002 .

[90]  E. Gileadi,et al.  Influence of roughness on the admittance of the quartz crystal microbalance immersed in liquids. , 2002, Analytical chemistry.

[91]  P. Kohl,et al.  A Study of Copper as a Cathode Material for an Ambient Temperature Sodium Ion Battery , 2001 .

[92]  M. Armand,et al.  Issues and challenges facing rechargeable lithium batteries , 2001, Nature.

[93]  Petr Novák,et al.  The complex electrochemistry of graphite electrodes in lithium-ion batteries , 2001 .

[94]  D. Aurbach,et al.  Investigation of the electrochemical windows of aprotic alkali metal (Li, Na, K) salt solutions , 2001 .

[95]  P. Kohl,et al.  Stability of Sodium Couple in Organic and Inorganic Molten Salt Electrolytes Investigated with Electrochemical Quartz Crystal Microbalance , 2001 .

[96]  E. Levi,et al.  Prototype systems for rechargeable magnesium batteries , 2000, Nature.

[97]  J. Kelly,et al.  Electrochemical Quartz Crystal Microbalance Study of Additive Effects in Pulsed Deposition of Cu‐Co Alloys , 2000 .

[98]  K. Doblhofer,et al.  The electrochemical quartz crystal microbalance (EQCM) in the studies of complex electrochemical reactions , 2000 .

[99]  O. Magnussen,et al.  Electrochemical Quartz Crystal Microbalance Study on the Kinetics of Nickel Monolayer and Multilayer Electrodeposition on (111)-Oriented Gold Films , 2000 .

[100]  M. Inoue,et al.  Modification of the Lithium Metal Surface by Nonionic Polyether Surfactants. II. Investigations with Microelectrode Voltammetry and In Situ Quartz Crystal Microbalance , 2000 .

[101]  E. Gileadi,et al.  Studies of Electroplating Using an EQCM. I. Copper and Silver on Gold , 2000 .

[102]  K. Kanamura,et al.  Quartz Crystal Microbalance Study for Lithium Deposition and Dissolution in Nonaqueous Electrolyte with HF , 1999 .

[103]  D. Aurbach,et al.  The Study of Surface Film Formation on Noble-Metal Electrodes in Alkyl Carbonates/Li Salt Solutions, Using Simultaneous in Situ AFM, EQCM, FTIR, and EIS , 1999 .

[104]  Alan C. West,et al.  Copper Deposition in the Presence of Polyethylene Glycol I. Quartz Crystal Microbalance Study , 1998 .

[105]  D. Aurbach,et al.  A Study of Lithium Deposition‐Dissolution Processes in a Few Selected Electrolyte Solutions by Electrochemical Quartz Crystal Microbalance , 1998 .

[106]  K. Naoi,et al.  Modification of the Lithium Metal Surface by Nonionic Polyether Surfactants: Quartz Crystal Microbalance Studies , 1998 .

[107]  B. Kasemo,et al.  Viscoelastic Acoustic Response of Layered Polymer Films at Fluid-Solid Interfaces: Continuum Mechanics Approach , 1998, cond-mat/9805266.

[108]  W. Smyrl,et al.  Confocal Laser Scanning Microscopy, Electrochemistry, and Quartz Crystal Microbalance Studies of Leveling Effects of Thiourea on Copper Deposition , 1998 .

[109]  T. Fujieda,et al.  Electrochemical and quartz microbalance technique studies of anode material for secondary lithium batteries , 1997 .

[110]  J. Rühe,et al.  Swelling of a polymer brush probed with a quartz crystal resonator , 1997 .

[111]  Bengt Herbert Kasemo,et al.  Frequency and dissipation-factor responses to localized liquid deposits on a QCM electrode , 1996 .

[112]  K. Naoi,et al.  Study of Deposition and Dissolution Processes of Lithium in Carbonate‐Based Solutions by Means of the Quartz‐Crystal Microbalance , 1996 .

[113]  Y. Gofer,et al.  Simultaneous microgravimetric and optical reflectivity studies of lithium underpotential deposition on Au(111) from propylene carbonate electrolytes , 1996 .

[114]  K. Rajeshwar,et al.  Electrochemical deposition and stripping of copper, nickel and copper nickel alloy thin films at a polycrystalline gold surface: a combined voltammetry-coulometry-electrochemical quartz crystal microgravimetry study , 1995 .

[115]  D. Aurbach,et al.  The application of EQCM to the study of the electrochemical behavior of propylene carbonate solutions , 1995 .

[116]  D. Aurbach,et al.  The Use of EQCM for the Study of Nonactive Metal Electrodes in Propylene Carbonate ‐ LiAsF6 Solutions Significance of the Data Obtained , 1995 .

[117]  M. Watanabe,et al.  Electrochemical quartz crystal microbalance study of copper ad-atoms on highly ordered Au(111) electrodes in sulfuric acid , 1995 .

[118]  M. Watanabe,et al.  Electrochemical quartz crystal microbalance study of copper ad-atoms on gold and platinum electrodes Part I. Adsorption of anions in sulfuric acid , 1995 .

[119]  M. Keddam,et al.  In Situ Monitoring of Phosphatation Reactions on Zn Using the Quartz Crystal Microbalance , 1994 .

[120]  M. Urbakh,et al.  Influence of the surface morphology on the quartz crystal microbalance response in a fluid , 1994 .

[121]  J. Gordon,et al.  An in-situ electrochemical quartz crystal microbalance study of the underpotential deposition of copper on Au(111) electrodes , 1994 .

[122]  Mengsu Yang,et al.  Surface morphology and the response of the thickness-shear mode acoustic wave sensor in liquids , 1993 .

[123]  K. Shimazu,et al.  In situ measurements of water adsorption on a platinum electrode by an electrochemical quartz crystal microbalance , 1992 .

[124]  K. Weil,et al.  Influence of the Surface Microstructure on the Coupling Between a Quartz Oscillator and a Liquid , 1992 .

[125]  Michael D. Ward,et al.  Measurement of interfacial processes at electrode surfaces with the electrochemical quartz crystal microbalance , 1992 .

[126]  M. Ward.  Probing electrocrystallization of charge transfer salts with the quartz crystal microbalance , 1989 .

[127]  S. Bruckenstein,et al.  Tracking anion expulsion during underpotential deposition of lead at silver using the quartz microbalance , 1989 .

[128]  S. Bruckenstein,et al.  In situ underpotential deposition study of lead on silver using the electrochemical quartz crystal microbalance: Direct evidence for lead(II) adsorption before spontaneous charge transfer , 1989 .

[129]  M. Ward.  Electrocrystallization of low dimensional solids: Directed selectivity and investigations of crystal growth with the quartz crystal microbalance , 1988 .

[130]  A. Grzegorzewski,et al.  Measurement of Mass and Surface Stress at One Electrode of a Quartz Oscillator , 1988 .

[131]  O. Melroy,et al.  Underpotential metal deposition on gold, monitored in situ with a quartz microbalance , 1988 .

[132]  J. Gordon,et al.  Observation of morphological relaxation of copper and silver electrodes in solution using a quartz microbalance , 1987 .

[133]  J. Gordon,et al.  Direct determination of the mass of an underpotentially deposited monolayer of lead on gold , 1986 .

[134]  Stanley Bruckenstein,et al.  Experimental aspects of use of the quartz crystal microbalance in solution , 1985 .

[135]  K. Behrndt.  Long-Term Operation of Crystal Oscillators in Thin-Film Deposition , 1971 .

[136]  Jerry L. Jones,et al.  Piezoelectric transducer for determination of metals at the micromolar level , 1969 .

[137]  G. Sauerbrey.  Verwendung von Schwingquarzen zur Wägung dünner Schichten und zur Mikrowägung , 1959 .

[138]  W. P. Mason,et al.  Piezoelectric Crystals and Their Applications to Ultrasonics , 1951 .

[139]  W. P. Mason.  Measurement of the Viscosity and Shear Elasticity of Liquids by Means of a Torsionally Vibrating Crystal , 1947, Journal of Fluids Engineering.

[140]  Dennis Derickson,et al.  The NanoVNA Vector Network Analyzer: This New Open-Source Electronic Test and Measurement Device Will Change Both Remote and In-Person Educational Delivery of Circuits, Electronics, Radio Frequency and Communication Laboratory Course Delivery , 2021, 2021 ASEE Pacific Southwest Conference - "Pushing Past Pandemic Pedagogy: Learning from Disruption" Proceedings.

[141]  A. Bund,et al.  An Electrochemical Quartz Crystal Microbalance Study on Electrodeposition of Aluminum and Aluminum-Manganese Alloys , 2017 .

[142]  N. Birbilis,et al.  An electrochemical quartz crystal microbalance study of magnesium dissolution , 2016 .

[143]  Diethelm Johannsmann,et al.  The Quartz Crystal Microbalance in Soft Matter Research , 2015 .

[144]  Claire Villevieille,et al.  Rechargeable Batteries: Grasping for the Limits of Chemistry , 2015 .

[145]  L. Trahey,et al.  Interfacial Studies of Li-Ion Battery Cathodes Using In Situ Electrochemical Quartz Microbalance with Dissipation , 2014 .

[146]  Hajime Miyashiro,et al.  EQCM Measurement of Deposition and Dissolution of Lithium in Glyme-Li Salt Molten Complex , 2013 .

[147]  E. Gileadi,et al.  Probing the Solid/Liquid Interface with the Quartz Crystal Microbalance , 2006 .

[148]  R. Oriňaková.  The influence of iron powder microstructure on its electrolytical coating with nickel , 2003 .

[149]  No Seung Myeong.  A Study on the Electrodeposition of NiFe Alloy Thin Films Using Chronocoulometry and Electrochemical Quartz Crystal Microgravimetry , 2001 .

[150]  J. Gordon,et al.  The oscillation frequency of a quartz resonator in contact with liquid , 1985 .

[151]  John F. Alder,et al.  Piezoelectric crystals for mass and chemical measurements. A review , 1983 .

[152]  Chih−shun Lu,et al.  Mass determination with piezoelectric quartz crystal resonators , 1975 .

[153]  Razika Djouani,et al.  MECHANISM OF ELECTRODEPOSITION OF NICKEL , 2022 .