Ultra-high-speed processing of nanomaterial-reinforced woven carbon fiber/polyamide 6 composites using reactive thermoplastic resin transfer molding

[1]  Akar Dogan,et al.  Low-velocity impact response of E-glass reinforced thermoset and thermoplastic based sandwich composites , 2017 .

[2]  V. Choudhary,et al.  Studies on toughened polycarbonate/multiwalled carbon nanotubes nanocomposites , 2017 .

[3]  Z. Ying,et al.  Mechanical reinforcement of graphene/poly(vinyl chloride) composites prepared by combining the in-situ suspension polymerization and melt-mixing methods , 2017 .

[4]  Qing Li,et al.  Crystallization behavior of poly(p-dioxanone) with cyclodextrin complex and nucleation mechanism discussion , 2016 .

[5]  J. Baek,et al.  Effects of process parameters and surface treatments of graphene nanoplatelets on the crystallinity and thermomechanical properties of polyamide 6 composite fibers , 2016 .

[6]  Fei Li,et al.  Tensile and flexural properties of graphene oxide coated-short glass fiber reinforced polyethersulfone composites , 2016 .

[7]  G. Tsui,et al.  Tensile properties of graphene nano-platelets reinforced polypropylene composites , 2016 .

[8]  R. S. Mauler,et al.  Influence of nucleating agent on the crystallization kinetics and morphology of polypropylene , 2016 .

[9]  V. Fiore,et al.  Effect of plasma treatment on the properties of Arundo Donax L. leaf fibres and its bio-based epoxy composites: A preliminary study , 2016 .

[10]  Jia‐Zhuang Xu,et al.  Graphene oxide induced isotactic polypropylene crystallization: role of structural reduction , 2016 .

[11]  Satoshi Kobayashi,et al.  Effect of fine particle incorporation into matrix on mechanical properties of plain woven carbon fiber reinforced plastics fabricated with vacuum assisted resin transfer molding , 2016 .

[12]  T. Zheng,et al.  Expected nucleation effects of carboxylic acid salts on poly(1-butene) , 2016 .

[13]  Huiliang Wang,et al.  Radical Chain Polymerization Catalyzed by Graphene Oxide and Cooperative Hydrogen Bonding. , 2016, Macromolecular rapid communications.

[14]  L. Ye,et al.  Monomer casting nylon-6-b-polyether amine copolymers: Synthesis and properties , 2015 .

[15]  A. Shojaei,et al.  Characterization of polyamide 6/carbon nanotube composites prepared by melt mixing-effect of matrix molecular weight and structure , 2015 .

[16]  Defeng Wu,et al.  Crystallization of Poly(ϵ-caprolactone) composites with graphite nanoplatelets: Relations between nucleation and platelet thickness , 2015 .

[17]  Xiaotao Zhu,et al.  Combined effect of air-plasma treatment and lubricant filling on the dry sliding wear behavior of hybrid PTFE/Nomex fabric/phenolic composite , 2014 .

[18]  Jayashree Bijwe,et al.  Surface Treatment of Carbon Fibers - A Review , 2014 .

[19]  M. Jaziri,et al.  Polyamide from lactams by reactive rotational molding via anionic ring-opening polymerization: Optimization of processing parameters , 2013 .

[20]  P. Dickens,et al.  Anionic polymerisation of caprolactam at the small-scale via DSC investigations , 2013, Journal of Thermal Analysis and Calorimetry.

[21]  A. Perejón,et al.  Nanoclay Nucleation Effect in the Thermal Stabilization of a Polymer Nanocomposite: A Kinetic Mechanism Change , 2012 .

[22]  Zhiping Lv,et al.  Design and properties of a novel nucleating agent for isotactic polypropylene , 2012 .

[23]  Richard Stewart,et al.  Thermoplastic composites — recyclable and fast to process , 2011 .

[24]  A. Müller,et al.  Super-nucleation in nanocomposites and confinement effects on the crystallizable components within block copolymers, miktoarm star copolymers and nanocomposites , 2011 .

[25]  L. Berg Process Development for the Reactive Injection Moulding of Caprolactam Intermediates , 2011 .

[26]  K. Khodabakhshi Anionic polymarisation of caprolactam : an approach to optimising thr polymerisation condition to be used in the jetting process , 2011 .

[27]  P. Dickens,et al.  Optimizing conditions for anionic polymerization of caprolactam for inkjetting , 2010 .

[28]  J. C. Pinto,et al.  Morphology, thermal and mechanical properties of PVC/MMT nanocomposites prepared by solution blending and solution blending + melt compounding , 2010 .

[29]  Soojin Park,et al.  A Study of Atmospheric Plasma Treatment on Surface Energetics of Carbon Fibers , 2010 .

[30]  Z. Zhou,et al.  The TPB Properties of Plasma-Treated Carbon Fiber-Reinforced Polystyrene Composites , 2009 .

[31]  Bing Li,et al.  Carbon nanotube induced polymer crystallization: The formation of nanohybrid shish–kebabs , 2009 .

[32]  A. Fereidoon,et al.  Effect of carbon nanotubes content on crystallization kinetics and morphology of polypropylene , 2009 .

[33]  H. Jin,et al.  Multiple light scattering measurement and stability analysis of aqueous carbon nanotube dispersions , 2008 .

[34]  Byung-Joo Kim,et al.  A study of atmospheric-pressure CHF3/Ar plasma treatment on dielectric characteristics of polyimide films. , 2008, Journal of colloid and interface science.

[35]  Harald E.N. Bersee,et al.  Reactive processing of textile fiber-reinforced thermoplastic composites – An overview , 2007 .

[36]  W. Yoon,et al.  The Preparation of Multi-walled CNT-PMMA Nanocomposite , 2006 .

[37]  G. Hu,et al.  Anionic polymerization of lactams: A comparative study on various methods of measuring the conversion of ε‐caprolactam to polyamide 6 , 2006 .

[38]  Harald E.N. Bersee,et al.  Optimisation of anionic polyamide-6 for vacuum infusion of thermoplastic composites : choice of activator and initiator , 2006 .

[39]  S. Picken,et al.  Optimisation of anionic polyamide-6 for vacuum infusion of thermoplastic composites: Influence of polymerisation temperature on matrix properties , 2006 .

[40]  M. Modesti,et al.  Thermal behaviour of compatibilised polypropylene nanocomposite: Effect of processing conditions , 2006 .

[41]  G. Meunier,et al.  Particle Size and Rapid Stability Analyses of Concentrated Dispersions Use of Multiple Light Scattering Technique , 2004 .

[42]  E. Wachtel,et al.  Nucleation ability of multiwall carbon nanotubes in polypropylene composites , 2003 .

[43]  M. A. Gómez,et al.  Highly efficient nucleating additive for isotactic polypropylene studied by differential scanning calorimetry , 2002 .

[44]  T. D. Fornes,et al.  Erratum to “Nylon 6 nanocomposites: the effect of matrix molecular weight”: [Polymer 42 (2001) 9929–40] , 2002 .

[45]  Kazue Ueda,et al.  Polyamides from lactams by centrifugal molding via anionic ring-opening polymerization , 2001 .

[46]  N. Dilsiz Plasma surface modification of carbon fibers: a review , 2000 .

[47]  C. Baillie,et al.  Studies of microstructural and mechanical properties of nylon/glass composite Part I The effect of thermal processing on crystallinity, transcrystallinity and crystal phases , 1999 .

[48]  R. Quirk,et al.  Anionic Polymerization: Principles and Practical Applications , 1996 .

[49]  Melvin I. Kohan,et al.  Nylon plastics handbook , 1995 .