Phenolphthalein-based Poly(arylene ether sulfone nitrile)s Multiblock Copolymers As Anion Exchange Membranes for Alkaline Fuel Cells.

A series of phenolphthalein-based poly(arylene ether sulfone nitrile)s (PESN) multiblock copolymers containing 1-methylimidazole groups (ImPESN) were synthesized to prepare anion exchange membranes (AEMs) for alkaline fuel cells. The ion groups were introduced selectively and densely on the unit of phenolphthalein as the hydrophilic segments, allowing for the formation of ion clusters. Strong polar nitrile groups were introduced into the hydrophobic segments with the intention of improving the dimensional stability of the AEMs. A well-controlled multiblock structure was responsible for the well-defined hydrophobic/hydrophilic phase separation and interconnected ion-transport channels, as confirmed by atomic force microscopy and small angle X-ray scattering. The ImPESN membranes with low swelling showed a relatively high water uptake, high hydroxide ion conductivity together with good mechanical, thermal and alkaline stability. The ionic conductivity of the membranes was in the range of 3.85-14.67×10(-2) S·cm(-1) from 30 to 80 °C. Moreover, a single H2/O2 fuel cell with the ImPESN membrane showed an open circuit voltage of 0.92 V and a maximum power density of 66.4 mW cm(-2) at 60 °C.

[1]  Q. Zhang,et al.  Fluorene-containing poly(arylene ether sulfone)s as anion exchange membranes for alkaline fuel cells , 2014 .

[2]  Karen I. Winey,et al.  High Hydroxide Conductivity in Polymerized Ionic Liquid Block Copolymers. , 2013, ACS macro letters.

[3]  Klaus-Dieter Kreuer.  Ion Conducting Membranes for Fuel Cells and other Electrochemical Devices , 2014 .

[4]  G. Robertson,et al.  Sulfonated copoly(phthalazinone ether ketone nitrile)s as proton exchange membrane materials , 2006 .

[5]  A. Zhu,et al.  Effect of fluorene groups on the properties of multiblock poly(arylene ether sulfone)s-based anion-exchange membranes. , 2014, ACS applied materials & interfaces.

[6]  K. Kreuer.  Ion Conducting Membranes for Fuel Cells and Other Electrochemical Devices , 2014 .

[7]  B. Steele,et al.  Materials for fuel-cell technologies , 2001, Nature.

[8]  M. Hickner,et al.  Degradation of imidazolium- and quaternary ammonium-functionalized poly(fluorenyl ether ketone sulfone) anion exchange membranes. , 2012, ACS applied materials & interfaces.

[9]  Jifu Zheng,et al.  Synthesis of novel cardo poly(arylene ether sulfone)s with bulky and rigid side chains for direct methanol fuel cells , 2014 .

[10]  K. Miyatake,et al.  Anion conductive aromatic block copolymers containing diphenyl ether or sulfide groups for application to alkaline fuel cells. , 2014, ACS applied materials & interfaces.

[11]  Zhongyi Zhang,et al.  Effect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester composites , 2007 .

[12]  M. Hickner,et al.  Ion Motion in Anion and Proton-Conducting Triblock Copolymers , 2013 .

[13]  Dc Kitty Nijmeijer,et al.  Anion exchange membranes for alkaline fuel cells: A review , 2011 .

[14]  Xiaocheng Lin,et al.  Novel alkaline anion exchange membranes containing pendant benzimidazolium groups for alkaline fuel cells , 2013 .

[15]  Manabu Tanaka,et al.  Anion conductive block poly(arylene ether)s: synthesis, properties, and application in alkaline fuel cells. , 2011, Journal of the American Chemical Society.

[16]  Hongwei Zhang,et al.  Recent development of polymer electrolyte membranes for fuel cells. , 2012, Chemical reviews.

[17]  Qiang Zhang,et al.  A novel guanidinium grafted poly(aryl ether sulfone) for high-performance hydroxide exchange membranes. , 2010, Chemical communications.

[18]  J. Parrondo,et al.  Derivatized cardo-polyetherketone anion exchange membranes for all-vanadium redox flow batteries , 2014 .

[19]  N. Mack,et al.  Controlled disulfonated poly(arylene ether sulfone) multiblock copolymers for direct methanol fuel cells. , 2014, ACS applied materials & interfaces.

[20]  Yushan Yan,et al.  Quaternary phosphonium-based polymers as hydroxide exchange membranes. , 2010, ChemSusChem.

[21]  K. Scott,et al.  Preparation of alkaline anion exchange polymer membrane from methylated melamine grafted poly(vinylbenzyl chloride) and its fuel cell performance , 2011 .

[22]  B. Améduri,et al.  Polymeric materials as anion-exchange membranes for alkaline fuel cells , 2011 .

[23]  Lei Li,et al.  Quaternized polyethersulfone Cardo anion exchange membranes for direct methanol alkaline fuel cells , 2005 .

[24]  Zhigang Shao,et al.  High durability and hydroxide ion conducting pore-filled anion exchange membranes for alkaline fuel cell applications , 2014 .

[25]  Huamin Zhang,et al.  Imidazolium functionalized polysulfone anion exchange membrane for fuel cell application , 2011 .

[26]  Nanwen Li,et al.  Ion Transport by Nanochannels in Ion-Containing Aromatic Copolymers , 2014 .

[27]  Q. Liu,et al.  Quaternized cardo polyetherketone anion exchange membrane for direct methanol alkaline fuel cells , 2009 .

[28]  S. Nam,et al.  Imidazolium-functionalized poly(arylene ether sulfone) block copolymer as an anion exchange membrane for alkaline fuel cell , 2013 .

[29]  Nanwen Li,et al.  Highly stable, anion conductive, comb-shaped copolymers for alkaline fuel cells. , 2013, Journal of the American Chemical Society.

[30]  S. Rowshanzamir,et al.  Review of the proton exchange membranes for fuel cell applications , 2010 .

[31]  Qingqing Miao,et al.  Hydroxide-conducting polymer electrolyte membranes from aromatic ABA triblock copolymers , 2014 .

[32]  V. Shahi,et al.  Multi-block poly(arylene ether)s containing pre-choloromethylated bisphenol: anion conductive ionomers , 2013 .

[33]  Michael A. Hickner,et al.  Ion Clustering in Quaternary Ammonium Functionalized Benzylmethyl Containing Poly(arylene ether ketone)s , 2013 .

[34]  M. Xiao,et al.  Novel polyaromatic ionomers with large hydrophilic domain and long hydrophobic chain targeting at highly proton conductive and stable membranes , 2011 .

[35]  R. Guo,et al.  Synthesis and Characterization of Phenolphthalein-based Poly(arylene ether sulfone) Hydrophilic−Hydrophobic Multiblock Copolymers for Proton Exchange Membranes , 2010 .

[36]  R. W. Sabnis.  A facile synthesis of phthalein indicator dyes , 2009 .

[37]  Y. Sakiyama,et al.  Sulfonated poly(arylene ether sulfone ketone) multiblock copolymers with highly sulfonated blocks. Long-term fuel cell operation and post-test analyses. , 2011, ACS applied materials & interfaces.