Synergistically Improving Flexibility and Thermoelectric Performance of Composite Yarn by Continuous Ultrathin PEDOT:PSS/DMSO/Ionic Liquid Coating.

Combining fabrics with a poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) coating is the most promising method to fabricate wearable thermoelectric (TE) devices. However, the high modulus, low strain, and low TE performance of PEDOT:PSS coating lead to poor flexibility and low power generation efficiency. In this study, dimethyl sulfoxide (DMSO) and ionic liquids (ILs) were selected as a modifier to enhance the flexibility and TE performance of PEDOT:PSS. Different from the penetrating structure and coil conformation of pristine PEDOT:PSS coating, a flexible continuous ultrathin layer of PEDOT:PSS/DMSO/1-ethyl-3-methylimidazolium dicyanamide (P/D/ED) with a linear conformation forms on the surface of cotton yarn. The morphology and structure of PEDOT:PSS and P/D/ED coating were characterized by FESEM, XPS, and Raman spectroscopy. Compared with the pristine PEDOT:PSS film, the P/D/ED film shows significantly reduced modules and enhanced strain and bending stability. Moreover, the TE performance of P/D/ED-coated yarn is significantly enhanced with nearly half mass loading. Based on this, a large-area wearable TE fabric with enhanced flexibility and TE performance was prepared. The output power density is 136.1 mW/m2 at ΔT = 40.8 K, which is a typically high value compared with the former reported composite TE fabrics. This study provides a new way to synergistically enhance the flexibility and TE performance of composite yarn, and the prepared TE fabric has great potential as a wearable power source.

[1]  G. Jia,et al.  Aluminum-doped zinc oxide–coated 3D spacer fabrics with electroless plated copper contacts for textile thermoelectric generators , 2021 .

[2]  L. Deng,et al.  Mechanically Robust and Flexible Films of Ionic Liquid‐Modulated Polymer Thermoelectric Composites , 2021, Advanced Functional Materials.

[3]  Youngkyoo Kim,et al.  Organic thermoelectric devices with PEDOT:PSS/ZnO hybrid composites , 2021, Chemical Engineering Journal.

[4]  G. Portale,et al.  Boosting the Thermoelectric Properties of PEDOT:PSS via Low‐Impact Deposition of Tin Oxide Nanoparticles , 2021, Advanced Electronic Materials.

[5]  L. Deng,et al.  Synergistically Boosting Thermoelectric Performance of PEDOT:PSS/SWCNT Composites via the Ion-Exchange Effect and Promoting SWCNT Dispersion by the Ionic Liquid. , 2021, ACS applied materials & interfaces.

[6]  Jingkun Xu,et al.  Organic/inorganic hybrid for flexible thermoelectric fibers , 2021 .

[7]  K. T. Park,et al.  High-Performance Thermoelectric Fabric Based on a Stitched Carbon Nanotube Fiber. , 2021, ACS applied materials & interfaces.

[8]  Yuan Tian,et al.  A polymer-based textile thermoelectric generator for wearable energy harvesting , 2020, Journal of Power Sources.

[9]  Seungjun Chung,et al.  High-performance compliant thermoelectric generators with magnetically self-assembled soft heat conductors for self-powered wearable electronics , 2020, Nature Communications.

[10]  L. Deng,et al.  Toward improved trade-off between thermoelectric and mechanical performances in polycarbonate/single-walled carbon nanotube composite films , 2020, npj Flexible Electronics.

[11]  V. Vijayakumar,et al.  Rubbing and Drawing: Generic Ways to Improve the Thermoelectric Power Factor of Organic Semiconductors? , 2020, Advanced Electronic Materials.

[12]  Kwok Hoe Chan,et al.  Scalable thermoelectric fibers for multifunctional textile-electronics , 2020, Nature Communications.

[13]  Hyunjung Lee,et al.  Recent Progress in Organic Thermoelectric Materials and Devices , 2020, Macromolecular Research.

[14]  X. Crispin,et al.  Elastic conducting polymer composites in thermoelectric modules , 2020, Nature Communications.

[15]  G. J. Snyder,et al.  Stretchable fabric generates electric power from woven thermoelectric fibers , 2020, Nature Communications.

[16]  Xizu Wang,et al.  Improved Thermoelectric Properties and Environmental Stability of Conducting PEDOT:PSS Films Post-treated With Imidazolium Ionic Liquids , 2020, Frontiers in Chemistry.

[17]  Feng Yan,et al.  PEDOT:PSS for Flexible and Stretchable Electronics: Modifications, Strategies, and Applications , 2019, Advanced science.

[18]  Hanfu Wang,et al.  Assembly Strategy and Performance Evaluation of Flexible Thermoelectric Devices , 2019, Advanced science.

[19]  H. Alshareef,et al.  Highly Stretchable and Air-Stable PEDOT:PSS/Ionic Liquid Composites for Efficient Organic Thermoelectrics , 2019, Chemistry of Materials.

[20]  O. Coulembier,et al.  Capillary rise of polydimethylsiloxane around a poly(ethylene terephthalate) fiber versus viscosity: Existence of a sharp transition in the dynamic wetting behavior. , 2019, Journal of colloid and interface science.

[21]  Xiaoming Tao,et al.  Study of Fiber-Based Wearable Energy Systems. , 2019, Accounts of chemical research.

[22]  Lidong Chen,et al.  Cotton-based wearable poly(3-hexylthiophene) electronic device for thermoelectric application with cross-plane temperature gradient , 2018, Thin Solid Films.

[23]  Yichuan Zhang,et al.  Wetting dynamics of polydimethylsiloxane mixtures on a poly(ethylene terephthalate) fiber. , 2018, Journal of colloid and interface science.

[24]  Eunji Lee,et al.  “Drop-on-textile” patternable aqueous PEDOT composite ink providing highly stretchable and wash-resistant electrodes for electronic textiles , 2018, Dyes and Pigments.

[25]  Yun Hee Jang,et al.  Ionic Liquid Designed for PEDOT:PSS Conductivity Enhancement. , 2018, Journal of the American Chemical Society.

[26]  Michael Wang,et al.  Flexible and stretchable power sources for wearable electronics , 2017, Science Advances.

[27]  K. S. Egorova,et al.  Biological Activity of Ionic Liquids and Their Application in Pharmaceutics and Medicine. , 2017, Chemical reviews.

[28]  Bong Seong Kim,et al.  Controlling Molecular Ordering in Aqueous Conducting Polymers Using Ionic Liquids , 2016, Advanced materials.

[29]  Anvar A. Zakhidov,et al.  Woven‐Yarn Thermoelectric Textiles , 2016, Advanced materials.

[30]  Kwang-Suk Jang,et al.  Enhancement of Thermoelectric Properties of PEDOT:PSS and Tellurium-PEDOT:PSS Hybrid Composites by Simple Chemical Treatment , 2015, Scientific Reports.

[31]  Tong Lin,et al.  Thermoelectric Fabrics: Toward Power Generating Clothing , 2015, Scientific Reports.

[32]  B. Cho,et al.  A wearable thermoelectric generator fabricated on a glass fabric , 2014 .

[33]  K. Zhang,et al.  Engineered doping of organic semiconductors for enhanced thermoelectric efficiency. , 2013, Nature materials.

[34]  A. Alsayed,et al.  Highly Conductive Poly(3,4‐ethylenedioxythiophene):Poly (styrenesulfonate) Films Using 1‐Ethyl‐3‐methylimidazolium Tetracyanoborate Ionic Liquid , 2012 .

[35]  Yue Wu,et al.  Flexible nanocrystal-coated glass fibers for high-performance thermoelectric energy harvesting. , 2012, Nano letters.

[36]  Kuei-Chien Chang,et al.  The Thermoelectric Performance of Poly(3,4-ethylenedi oxythiophene)/Poly(4-styrenesulfonate) Thin Films , 2009 .

[37]  Sung Kyu Park,et al.  Recent Progress of Textile-Based Wearable Electronics: A Comprehensive Review of Materials, Devices, and Applications. , 2018, Small.

[38]  R. Patel,et al.  Simultaneous improvement of performance and stability in PEDOT:PSS–sorbitol composite based flexible thermoelectric modules by novel design and fabrication process , 2017, Macromolecular Research.