Numerical Simulation of Heat and Mass Transfer Behavior during Iron Ore Sintering: A Review

Accurate computational models of sintering behavior would assist to enhance sinter quality and are anticipated to play a role in yield prediction. Sintering is a vital process in the manufacturing of iron and steel. As a consequence, the primary objective of these models will be a thorough simulation of mass and heat transport during the sintering process. In this paper, based on the examination and integration of previous studies, the fundamental physical formula and chemical reactions of the numerical simulation of the sintering process are introduced in depth with mechanism analysis. Furthermore, in view of the current numerical simulation methods and sintering process technology innovation development, the studies on sintering numerical simulation are reviewed from different angles, of which the main methods and assumptions are discussed. Finally, the current state of sintering simulation including the numerical simulation of innovative algorithm and optimized sintering technology is discussed in detail, along with potential implications for model development.

[1]  F. Shen,et al.  Mathematical Simulation of Iron Ore Fines Sintering Process with Solid Fuel Segregation Distribution and Corresponding Heat Pattern Study , 2022, Metals.

[2]  Feng Yan,et al.  Data‐Driven Modeling Methods in Sintering Process: Current Research Status and Perspectives , 2022, The Canadian Journal of Chemical Engineering.

[3]  Joong Yull Park,et al.  Review of computational fluid dynamics modeling of iron sintering process , 2022, Journal of Mechanical Science and Technology.

[4]  Chao-Kai Li,et al.  Numerical simulation of CO emission in a sintering pot under flue gas recirculation , 2022, Chemical Engineering Journal.

[5]  Fan-Ning Cheng,et al.  Investigation on the evolution characteristics of bed porous structure during iron ore sintering , 2022, Particuology.

[6]  Y. Zhang,et al.  Mathematical modeling of natural gas injection in iron ore sintering process and corresponding environmental assessment of CO2 mitigation , 2022, Journal of Cleaner Production.

[7]  Qiuwan Wang,et al.  CFD prediction of heat/mass transfer in multi-layer sintering process assisted with gaseous fuel injection , 2021, International Communications in Heat and Mass Transfer.

[8]  Hao Fang,et al.  Experimental investigation on the effect of granulation moisture on the flame front propagation and pore structure in the high-temperature zone of the sinter bed , 2021, Powder Technology.

[9]  Hao Zhou,et al.  Influence of quick lime on pore characteristics of high-temperature zone in iron ore sinter based on XCT technology , 2021, Journal of Materials Research and Technology.

[10]  Sonal K. Thengane,et al.  Nox formation in fixed-bed biomass combustion: Chemistry and modeling , 2021 .

[11]  S. Rath,et al.  Application of Machine Learning Algorithms for Prediction of Sinter Machine Productivity , 2021, 2021 8th International Conference on Computing for Sustainable Global Development (INDIACom).

[12]  H. Long,et al.  Effect of gangue composition on assimilation characteristic of iron ore in the sintering process , 2020, Ironmaking & Steelmaking.

[13]  Qiuwan Wang,et al.  Recent progress in sustainable and energy-efficient technologies for sinter production in the iron and steel industry , 2020 .

[14]  Z. Pu,et al.  Modelling and numerical simulation of isothermal oxidation of an individual magnetite pellet based on computational fluid dynamics , 2020, Journal of Iron and Steel Research International.

[15]  S. Schneiderbauer,et al.  Computational Fluid Dynamics Simulation of Iron Ore Reduction in Industrial‐Scale Fluidized Beds , 2020, steel research international.

[16]  J. Cai,et al.  Study of Heat Transfer and the Hydrodynamic Performance of Gas–Solid Heat Transfer in a Vertical Sinter Cooling Bed Using the CFD-Taguchi-Grey Relational Analysis Method , 2020, Energies.

[17]  H. Saxén,et al.  Measurement and simulation validation of DEM parameters of pellet, sinter and coke particles , 2020 .

[18]  Swantje Pietsch,et al.  Possibilities and Limits of Computational Fluid Dynamics-Discrete Element Method Simulations in Process Engineering: A Review of Recent Advancements and Future Trends. , 2020, Annual review of chemical and biomolecular engineering.

[19]  S. Qing,et al.  Numerical research on combining flue gas recirculation sintering and fuel layered distribution sintering in the iron ore sintering process , 2020 .

[20]  J. Rieger,et al.  Flame front progress in gas assisted iron ore sintering , 2020 .

[21]  Hao Zhou,et al.  Effect of coke rate and basicity on computed tomography-measured pore parameters and effective thermal conductivity of iron ore sinter , 2019, Journal of Materials Research and Technology.

[22]  M. Gan,et al.  Optimisation model of fuel distribution in materials bed of iron ore sintering process , 2019 .

[23]  T. Jiang,et al.  Investigation into the characteristics of H2-rich gas injection over iron ore sintering process: Experiment and modelling , 2019, Applied Thermal Engineering.

[24]  R. Cromarty,et al.  Simulation of the pressure drop across granulated mixtures using a coupled DEM – CFD model , 2019, Advanced Powder Technology.

[25]  Liu Chao,et al.  Numerical simulation of sintering based on biomass fuel , 2018 .

[26]  Jiemin Zhou,et al.  Prediction of sinter yield and strength in iron ore sintering process by numerical simulation , 2018 .

[27]  Jiemin Zhou,et al.  Modeling and Simulation of Iron Ore Sintering Process with Consideration of Granule Growth , 2018 .

[28]  K. Cen,et al.  High resolution X-ray microtomography for the characterization of pore structure and effective thermal conductivity of iron ore sinter , 2017 .

[29]  Zhilong Cheng,et al.  Optimization of gaseous fuel injection for saving energy consumption and improving imbalance of heat distribution in iron ore sintering , 2017 .

[30]  Jianliang Zhang,et al.  Recent Advances and Research Status in Energy Conservation of Iron Ore Sintering in China , 2017 .

[31]  Qiuwan Wang,et al.  Improvement of heat pattern and sinter strength at high charcoal proportion by applying ultra-lean gaseous fuel injection in iron ore sintering process , 2017 .

[32]  Jingxin Lei,et al.  A facile synthesis of solid-solid phase change material for thermal energy storage , 2017 .

[33]  Yuyuan Zhao,et al.  Numerical Simulation of Heat Transfer in Porous Metals for Cooling Applications , 2017, Metallurgical and Materials Transactions B.

[34]  Antti Kemppainen,et al.  Extensive review of the opportunities to use biomass-based fuels in iron and steelmaking processes , 2017 .

[35]  K. Cen,et al.  Experimental study and X-ray microtomography based CFD simulation for the characterization of pressure drop in sinter bed , 2017 .

[36]  Hui Dong,et al.  Numerical investigation of gas-solid heat transfer process in vertical tank for sinter waste heat recovery , 2016 .

[37]  Yan Liu,et al.  Experimental investigation of fluid flow and heat transfer in a randomly packed bed of sinter particles , 2016 .

[38]  Zhi Wen,et al.  Mathematical modeling of and parametric studies on flue gas recirculation iron ore sintering , 2016 .

[39]  I. Im,et al.  Heat transfer process in gas–solid fluidized bed combustors: A review , 2015 .

[40]  G. C. Abreu,et al.  Operational and environmental assessment on the use of charcoal in iron ore sinter production , 2015 .

[41]  S. S. Rath,et al.  Characterization and Processing of Iron Ore Slimes for Recovery of Iron Values , 2015 .

[42]  C. Chao,et al.  Study of enthalpy of evaporation, saturated vapor pressure and evaporation rate of aqueous nanofluids , 2015 .

[43]  C. E. Loo,et al.  Modelling fuel combustion in iron ore sintering , 2015 .

[44]  Mohsen Davazdah Emami,et al.  The effects of kinetic parameters on combustion characteristics in a sintering bed , 2014 .

[45]  Qiuwang Wang,et al.  Energy and exergy analysis for waste heat cascade utilization in sinter cooling bed , 2014 .

[46]  Junkui Wang,et al.  Numerical investigation of sinter cooling process in sinter cooler , 2013 .

[47]  Xiaohui Zhang,et al.  Simulation and optimization of waste heat recovery in sinter cooling process , 2013 .

[48]  N. Nath,et al.  Analysis by multiphase multicomponent model of iron ore sintering based on alternative steelworks gaseous fuels , 2012 .

[49]  Jun-ichiro Yagi,et al.  Three dimensional mathematical model of the iron ore sintering process based on multiphase theory , 2012 .

[50]  G. Roy,et al.  Mathematical modelling of iron ore sintering process using genetic algorithm , 2012 .

[51]  Y. P. Banjare,et al.  CFD simulation of a Gifford–McMahon type pulse tube refrigerator , 2009 .

[52]  Jiin-Yuh Jang,et al.  3-D Transient conjugated heat transfer and fluid flow analysis for the cooling process of sintered bed , 2009 .

[53]  S. Komarov,et al.  Heat Transfer Analysis of the Mosaic Embedding Iron Ore Sintering (MEBIOS) Process , 2009 .

[54]  S. D. Kim,et al.  Reaction kinetics of reduction and oxidation of metal oxides for hydrogen production , 2008 .

[55]  M. Hajaligol,et al.  A 3D modeling of static and forward smoldering combustion in a packed bed of materials , 2007 .

[56]  Y. Saboohi,et al.  Modeling of multiple noncatalytic gas–solid reactions in a moving bed of porous pellets based on finite volume method , 2007 .

[57]  H. Yamaoka,et al.  Development of a 3 Dimensional Mathematical Simulation Model for Iron Ore Sintering Process , 2006 .

[58]  Won Yang,et al.  Application of Intra-Particle Combustion Model for Iron Ore Sintering Bed , 2006 .

[59]  Kishalay Mitra,et al.  Mathematical Modeling and Optimization of Two-Layer Sintering Process for Sinter Quality and Fuel Efficiency Using Genetic Algorithm , 2005 .

[60]  Takazo Kawaguchi,et al.  Development of a 3-D sinter process mathematical simulation model , 2005 .

[61]  Won Yang,et al.  Unsteady one-dimensional model for a bed combustion of solid fuels , 2004 .

[62]  Changkook Ryu,et al.  Modeling of Combustion and Heat Transfer in an Iron Ore Sintering Bed with Considerations of Multiple Solid Phases , 2004 .

[63]  Hermann Hofbauer,et al.  Modeling and simulation of heat front propagation in the iron ore sintering process , 2004 .

[64]  Gopal S. Upadhyaya,et al.  Some issues in sintering science and technology , 2001 .

[65]  Junya Kano,et al.  Numerical simulation model of the iron ore sintering process directly describing the agglomeration phenomenon of granules in the packed bed , 2000 .

[66]  Nirupam Chakraborti,et al.  Dynamic process modelling of iron ore sintering , 1997 .

[67]  Massoud Kaviany,et al.  Role of gas-phase reaction and gas-solid thermal nonequilibrium in reverse combustion , 1997 .

[68]  Shun Sato,et al.  Development and Application of an Integrated Simulation Model for Iron Ore Sintering , 1987 .

[69]  J. Yagi,et al.  Mathematical Modeling of Sintering Process Considering Influence of Changes in Void Fraction and Apparent Particle Size in the Bed on Pressure Drop , 1984 .

[70]  M. Horio,et al.  Estimation of Heat Exchange Area in Sintering Beds , 1980 .

[71]  H. Exner,et al.  Computer simulation of sintering processes , 1979 .

[72]  S. Asai,et al.  Theoretical Analysis on the Effective Distribution Coefficient for Solidification Accompanied with Liquid and Solid Region , 1979 .

[73]  Takasi Tukamoto,et al.  Analysis of Sintering Process by the Mathematical Model , 1970 .

[74]  I. Muchi,et al.  Mathematical Model of Sintering Bed , 1967 .

[75]  Anthony B. Murphy,et al.  Simulation of melt pool behaviour during additive manufacturing: Underlying physics and progress , 2020 .

[76]  Lingen Chen,et al.  Numerical simulation and analyses for sinter cooling process with convective and radiative heat transfer , 2016 .

[77]  M. Panjehpour,et al.  TWO-DIMENSIONAL AXISYMMETRIC MODELING OF COMBUSTION IN AN IRON ORE SINTERING BED , 2013 .

[78]  M. Ganaoui,et al.  Ranz and Marshall Correlations Limits on Heat Flow Between a Sphere and its Surrounding Gas at High Temperature , 2013 .

[79]  Staffan Lundström,et al.  Simulation of heat transfer and fluid flow in a porous bed of iron ore pellets during up-draught drying , 2006 .

[80]  L. A. Dombrovskii,et al.  Approximate Methods for Calculating Radiation Heat Transfer in Dispersed Systems , 1996 .

[81]  H. Toda,et al.  Theoretical Investigation of Sintering Process , 1984 .

[82]  H. Martin.  Low peclet number particle-to-fluid heat and mass transfer in packed beds , 1978 .

[83]  Chengfeng Sun,et al.  Intensive reduction of fuel consumption in the sintering process of double-layered fuel segregation with return fines embedding , 2022, Fuel.