论文信息 - Investigation the design of a RSRM through the analysis of the finite elements with experimental validation

Investigation the design of a RSRM through the analysis of the finite elements with experimental validation

This work presents a study on the design of a Rotary Switched Reluctance Motor (RSRM) of 1 hp through the 3D finite elements analysis (FEA) concerning static magnetization characteristics by phase. A comparison between two types of mesh (tetrahedral and hexahedral) was performed. In order to validate the analysis, three experimental methods were used: rising (RC) and falling (FC) DC current and determination of the impedance with AC voltage (DI) methods. In the experiment a data acquisition board (DAQ) integrated to platform LabView® was used. From the results obtained, a comparative study between simulated and experimental values was held. An evaluation on all methods, highlighting the positive, and negative aspects and their limitation was performed.

R. S. T. Pontes | V. S. de Oliveira | D. N. Oliveira | R. N. de C Almeida | W. A. da Silva

[1] R. Krishnan,et al. Switched reluctance motor drives : modeling, simulation, analysis, design, and applications , 2001 .

[2] Adrian David Cheok,et al. Computer-based automated test measurement system for determining magnetization characteristics of switched reluctance motors , 2001, IEEE Trans. Instrum. Meas..

[3] Marcelo de Souza,et al. SETOR DE TECNOLOGIA PROGRAMA DE PÓS-GRADUAÇÃO EM ENGENHARIA ELÉTRICA - PPGEE INCLUSÃO DO MEIO UPML NO MÉTODO DOS ELEMENTOS FINITOS NO DOMÍNIO DO TEMPO APLICADO AO ELETROMAGNETISMO , 2009 .

[4] D. Oliveira,et al. Comparison of simulation and measurement methods of the static magnetization characteristics of a 1 hp RSRM , 2008, 2008 18th International Conference on Electrical Machines.

[5] D.N. Oliveira,et al. Comparison of simulation and measurement methods of the static magnetization characteristics of a low power LSRM , 2008, 2008 18th International Conference on Electrical Machines.

[6] R. Gobbi,et al. Rising and Falling Current Methods for Measurement of Flux-Linkage Characteristics of Switched Reluctance Motors: A Comparative Study , 2006, 2006 IEEE International Power and Energy Conference.