Research on Thermal-Field and Sound-Field Coupling Properties of Different Grid Forms

The inlet grid and exhaust grid are widely used in engineering machinery products. The process that airflow goes through grids is a complex turbulent flow and directly related to the heat dispersion and aerodynamic noise. The theoretical analysis result shows that the jet noise generated by airflow has a connection with the grid structure form, fluid flowing situation, and heat conduction. In addition, the influences of different grid structure forms (included the round hole, long hole, and square hole) and porosity on the heat dissipation and aerodynamic noise were analyzed and presented based on the verified computational fluid dynamics (CFD) model. Results show that the heat dispersion and aerodynamic noise of the round hole are most effective under the same porosity; as the porosity increases, the disturbance degree decreases and the noise reduction effect gets better. Finally, the research result provides the scientific basis for improving grid structure and achieving energy saving and noise reduction.

[1]  Fabien Harambat,et al.  Effects of ground vehicle inclination on underhood compartment cooling , 2012 .

[2]  Zhan Zhao,et al.  CFD-DEM simulation of material motion in air-and-screen cleaning device , 2012 .

[3]  Ma Gui-yang.  On New Eddy Viscosity Models of Turbulent Flow in the Cylinder of Internal Combustion Engine , 2002 .

[4]  N. Gil-Negrete,et al.  Predicting the dynamic behaviour of hydrobushings , 2005 .

[5]  C. Kiranoudis,et al.  CFD modeling of hydrogen deflagration in a tunnel , 2014 .

[6]  K. Viswanathan,et al.  Mechanisms of Jet Noise Generation: Classical Theories and Recent Developments , 2009 .

[7]  J. Xamán,et al.  Thermal performance of a double pane window using glazing available on the Mexican market , 2015 .

[8]  Jan Carmeliet,et al.  Aerodynamic study of different cyclist positions: CFD analysis and full-scale wind-tunnel tests. , 2010, Journal of biomechanics.

[9]  Hao Zhi-yong.  ACTIVE CONTROL SIMULATION OF TORSIONAL VIBRATION FOR TURBINE-GENERATOR SHAFT SYSTEM BASED ON GLOBALLY OPTIMAL CONTROL ALGORITHMS OF QUADRATIC REGULATOR , 2006 .

[10]  G. Xie,et al.  Numerical Prediction of Flow Structure and Heat Transfer in Square Channels with Dimples Combined with Secondary Half-Size Dimples/Protrusions , 2014 .

[11]  M. Fisher,et al.  A MODELLING OF THE NOISE FROM SIMPLE COAXIAL JETS, PART I: WITH UNHEATED PRIMARY FLOW , 1998 .

[12]  H. Xia,et al.  Turbulent jet characteristics for axisymmetric and serrated nozzles , 2017 .

[13]  Martin Schifko,et al.  Transient Dip Paint Simulation of Entire Car Bodies within One Day , 2015 .

[14]  Xu Yu-lian.  Optimizing Calculation and Experimental Research of Intake Port of Automobile Diesel Engine , 2013 .

[15]  Krishnan Mahesh,et al.  A dynamic end cap technique for sound computation using the Ffowcs Williams and Hawkings equations , 2014 .

[16]  CFD Simulations of one Period of a Louvered Fin where the Airflow is Inclined Relative to the Heat Exchanger , 2015 .

[17]  Ilhan Bayraktar,et al.  Computational simulation methods for vehicle thermal management , 2012 .

[18]  Hee Joo Poh,et al.  Predicting shot peening coverage using multiphase computational fluid dynamics simulations , 2014 .

[19]  Yan He,et al.  Methods for Integrating Energy Consumption and Environmental Impact Considerations into the Production Operation of Machining Processes , 2010 .

[20]  N. Sinha,et al.  Prediction of Jet Noise for Realistic Flow Problems Using Large Eddy Simulation , 2012 .

[21]  D. L. Hawkings,et al.  Sound generation by turbulence and surfaces in arbitrary motion , 1969, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.

[22]  Wenming Yang,et al.  Numerical simulation of a novel energy-efficient dew-point evaporative air cooler , 2014 .

[23]  Stéphane Moreau,et al.  Subsonic Jet Noise Simulations Using Both Structured and Unstructured Grids , 2015 .

[24]  D.M. Dawson,et al.  An advanced engine thermal management system: nonlinear control and test , 2005, IEEE/ASME Transactions on Mechatronics.

[25]  Huajun Cao.  INTEGRATED TASK-ASSIGNING MODEL OF ENERGY SAVING AND NOISE REDUCTION IN THE MACHINING SYSTEMS AND ITS APPLICATION , 2006 .

[26]  C. Bogey,et al.  Noise Investigation of a High Subsonic, Moderate Reynolds Number Jet Using a Compressible Large Eddy Simulation , 2003 .