Thirty Years’ Experience in RELAP5 Applications at GRNSPG & NINE

Abstract The application of RELAP5 at GRNSPG & NINE (Nuclear Research Group of San Piero a Grado&Nuclear and Industrial Engineering) started more than 30 years ago during which several versions of the code have been applied for the analysis of a very large variety of scenarios occurring in facilities and nuclear installations. The present paper has two goals: (1) to summarize the results and main outcomes achieved through the application of RELAP5 to international projects and benchmarks in which GRNSPG & NINE was involved and (2) to qualify the system’s thermal-hydraulic code calculations through the systematic application of a set of developed procedures. Among the analyses performed, this paper will provide insights into the code results and, whenever possible, into the comparison with the reference/experimental data of scenarios measured in (1) integral test facilities: PSB-VVER, ATLAS, PKL, LOBI, LOFT, SPES, PACTEL; (2) separate effect test facilities: BFBT, Neptun, PANDA; (3) research reactors: Experimental Breeder Reactor (EBR); and (4) nuclear power plants: Atucha-II [pressurized heavy water reactor (PHWR)-Konvoi], VVER-1000, Darlington (CANDU). In relation to the methodology developed for qualifying a system thermal-hydraulic code calculation, this paper provides a short description and spot results of the systematic application to the cases mentioned above in respect to some of the following steps: (1) demonstration of the geometrical fidelity; (2) demonstration of the steady-state achievement; (3) qualification at the on-transient level, which implies the characterization of (a) phenomenological windows and (b) relevant thermal-hydraulic aspects; and (4) quantitative analysis to evaluate the accuracy of the code calculation using the fast Fourier transform based method. Finally, the main outcomes of the analyses summarized in this paper are the characterization of the level of assessment of RELAP5 and the demonstration of existence of a robust procedure to qualify system thermal-hydraulic code calculations.

[1]  F. D’Auria,et al.  Standardized Consolidated Calculated and Reference Experimental Database (SCCRED): A Supporting Tool for V&V and Uncertainty Evaluation of Best-Estimate System Codes for Licensing Applications , 2016 .

[2]  Alessandro Petruzzi,et al.  Recent Applications of RELAP5-3D at GRNSPG , 2012 .

[3]  Francesco Saverio D'Auria,et al.  REPEATABILITY OF ITF EXPERIMENTS CARRIED-OUT FOR ASSESSMENT AND VALIDATION OF THERMAL-HYDRAULIC SYSTEM CODES , 2007 .

[4]  Francesco Saverio D'Auria,et al.  Final Report of the OECD-PKL Project , 2007 .

[5]  Alessandro Petruzzi,et al.  The BEPU Evaluation Model with RELAP5-3D for the Licensing of the Atucha-II NPP , 2016 .

[6]  F. D'Auria,et al.  RELAP5/MOD3 .2 Post Test Analysis and Accuracy Quantification of SPES Test SP-SB-04 , 1999 .

[7]  Francesco Saverio D'Auria,et al.  CSNI Code Validation Matrix of Thermo-Hydraulic Codes for LWR LOCA and Transients , 1987 .

[8]  Francesco Saverio D'Auria,et al.  Nodalisation qualification in preparation of counterpart test analysis , 2004 .

[9]  Francesco Saverio D'Auria,et al.  Comparison Report of the OECD/CSNI International Standard Problem 21 (PIPER-ONE Experiment PO-SB-7). CSNI Report , 1989 .

[10]  Francesco Saverio D'Auria,et al.  A procedure to optimize the timing of operator actions of accident management procedures , 2006 .

[11]  Francesco Saverio D'Auria,et al.  Thermal-Hydraulic System Codes in Nulcear Reactor Safety and Qualification Procedures , 2008 .

[12]  Francesco Saverio D'Auria,et al.  Revisiting of PKL E22 Experiment Post-Test Calculation , 2008 .

[13]  Jacques Royen,et al.  NUCLEAR ENERGY AGENCY COMMITTEE ON THE SAFETY OF NUCLEAR INSTALLATIONS OECD/CSNI SPECIALIST MEETING ON NUCLEAR AEROSOLS IN REACTOR SAFETY , 1998 .

[14]  Francesco Saverio D'Auria,et al.  Development of a Code with the Capability of Internal Assessment of Uncertainty , 2000 .

[15]  G. M. Galassi,et al.  Notes to the results obtained by DCMN of Pisa University in the participation to the NEA-OECD BWR Benchmark, OECD-NEA Workshop on BWR Benchmark, Paris (F) May 10-12, 1995 , 1995 .

[16]  Hugo J. Hahn ORGANISATION FOR ECONOMIC CO-OPERATION AND DEVELOPMENT, NUCLEAR ENERGY AGENCY , 1983 .

[17]  Francesco Saverio D'Auria,et al.  Application of Relap5/mod3.2 to the OECD/CSNI/NEA Main Steam Line Break Benchmark related to TMI-1 , 1999 .

[18]  Francesco Saverio D'Auria,et al.  Sub-channel analysis by Relap5 system code of Boil-off experiment (test 5002) with Neptun facility , 2004 .

[19]  Francesco Saverio D'Auria,et al.  Confirmatory Safety Analyses carried out by Relap5 and Cathare codes related to the Kozloduy VVER 440/230 unit No. 3 , 2001 .

[20]  Francesco Saverio D'Auria,et al.  The Capability of Internal Assessment of Uncertainty , 2000 .

[21]  Francesco Saverio D'Auria,et al.  Intercomparison and validation of computer codes for thermalhydraulic safety analyses of heavy water reactors , 2003 .

[22]  Alessandro Petruzzi,et al.  STATE OF THE ART IN USING BEST ESTIMATE CALCULATION TOOLS IN NUCLEAR TECHNOLOGY , 2006 .

[23]  Francesco Saverio D'Auria,et al.  Accident Management Technology in VVER-1000 , 2006 .

[24]  MARCO CHERUBINI,et al.  THERMAL-HYDRAULIC ANALYSIS OF FAST BREEDER REACTOR : PROTECTED LOSS OF FLOW ( PLOF ) TRANSIENT , 2013 .

[25]  Francesco Saverio D'Auria,et al.  Analysis by Relap5 code of boron dilution phenomenon in Small Break LOCA and in Mid-Loop Transients performed in PKL-III Test Facility , 2008 .

[26]  Alessandro Petruzzi,et al.  Comparison between Best-Estimate–Plus–Uncertainty Methods and Conservative Tools for Nuclear Power Plant Licensing , 2010 .

[27]  F. D'Auria,et al.  Piper-one Research: overview of the experiments carried out and lesson learned , 1991 .

[28]  Francesco Saverio D'Auria,et al.  Overview of Uncertainty Issues and Methodologies , 1998 .

[29]  Alessandro Petruzzi,et al.  Relap5/mod3.2 post-test analysis and CIAU uncertainty evaluation of LOFT experiment L2-5 , 2005 .

[30]  Francesco Saverio D'Auria,et al.  Independent qualification of the CIAU tool based on the uncertainty estimate through the simulation of LOBI test BT-02 , 2003 .

[31]  Francesco Saverio D'Auria,et al.  INTERNATIONAL STANDARD PROBLEM 50: THE UNIVERSITY OF PISA CONTRIBUTION , 2012 .

[32]  Francesco Saverio D'Auria,et al.  Application of an optimized AM procedure following a SBO in a VVER-1000 , 2008 .

[33]  Francesco Saverio D'Auria,et al.  Analysis, by RELAP5 code, of Boron Dilution Phenomena in a Mid-Loop Operation Transient, Performed in PKL III F2.1 RUN 1 Test , 2007 .

[34]  Francesco Saverio D'Auria,et al.  Benchmark exercise on SBLOCA experiment of PWR PACTEL facility , 2013 .

[35]  Francesco Saverio D'Auria,et al.  Code validation and uncertainties in system thermalhydraulics , 1998 .

[36]  Francesco Saverio D'Auria,et al.  Thermohydraulics of Emergency Core Cooling in Light Water Reactors - A State-of-the-Art Report. CSNI Report , 1989 .

[37]  F. D’Auria,et al.  Relap5 simulation of Darlington Nuclear Generating Station Loss of Flow Event , 2014 .

[38]  Alessandro Petruzzi,et al.  RELAP5-3D Analysis of OECD-NEA/NRC BFBT Benchmark , 2007 .

[39]  G. M. Galassi,et al.  Relap5/mod3.2 post-test analysis and accuracy quantification of LSTF test SB-CL-21 , 1998 .

[40]  Francesco Saverio D'Auria,et al.  Independent qualification of the CIAU tool based on the uncertainty estimate in the prediction of the LOBI test a1-93 , 2001 .

[41]  F. D'Auria,et al.  US NRC NUREG - RELAP5/MOD3.2 Post Test Analysis and Accuracy Quantification of SPES Test SP-SB-03 , 1999 .

[42]  Alessandro Petruzzi,et al.  Methodology of Internal Assessment of Uncertainty and Extension to Neutron Kinetics/Thermal-Hydraulics Coupled Codes , 2005 .

[43]  Francesco Saverio D'Auria,et al.  Effect on Code Predictions by Changing the Code Version of Relap5 on SBLOCA for Test 9.1b in Bethsy Test Facility , 2007 .

[44]  Alessandro Petruzzi,et al.  Analysis of the OECD/CSNI ISP-42 PANDA integral test facility by the RELAP5/Mod3.2.2 code , 2002 .

[45]  Francesco Saverio D'Auria,et al.  Analyses of PACTEL passive safety injection experiments with APROS, CATHARE and RELAP5 codes , 2000 .