Advantages and limitations of reference electrodes with an ionic liquid junction and three-dimensionally ordered macroporous carbon as solid contact.

Liquid-junction-free reference electrodes that contact the sample through an ionic-liquid-doped, hydrophobic polymer membrane have attracted attention because they offer an alternative to reference electrodes with conventional salt bridges. In this work, liquid-junction-free reference electrodes were developed using plasticized poly(vinyl chloride) membranes doped with the ionic liquid (IL) 1-methyl-3-octylimidazolium bis(trifluoromethylsulfonyl)imide. Three-dimensionally ordered macroporous (3DOM) carbon substrates infused with this ionic liquid phase were used as solid contacts for these reference membranes. As in prior work with ionophore-based 3DOM carbon-contact ion-selective electrodes, the long-term stability of the liquid-junction-free reference electrodes was excellent, with potential drifts as low as 42 μV/h over 26 days. Successful measurements of pH in milk were performed and, to the best of our knowledge, are the first example of the use of liquid-junction-free reference electrodes in complex real-life samples. A thorough analysis of their performance at low pH revealed protonation of the ionic liquid anion (L(-)) and formation of LHL(-) type of associates in the reference electrode membrane, effects not observed in prior work. Also, when reference membranes were mounted into conventional electrode bodies with inner filling solutions that contained no ionic liquid ions, zero-current ion fluxes across the sample/membrane interface occurred, as previously only seen for ionophore-doped ion-selective membranes. Understanding these effects will be crucial to the design of liquid-junction-free reference electrodes suitable for other applications.

[1]  Yousuke Fujino,et al.  Ionic liquid salt bridge based on N-alkyl-N-methylpyrrolidinium bis(pentafluoroethanesulfonyl)amide for low ionic strength aqueous solutions , 2011 .

[2]  P. Bühlmann,et al.  The phase-boundary potential model. , 2004, Talanta.

[3]  E. Bakker,et al.  Polyion Sensors as Liquid Junction‐Free Reference Electrodes , 1999 .

[4]  Naoya Nishi,et al.  A digital simulation study of steady-state voltammograms for the ion transfer across the liquid–liquid interface formed at the orifice of a micropipette , 2008 .

[5]  R. E. Gyurcsányi,et al.  Direct evidence of ionic fluxes across ion-selective membranes: a scanning electrochemical microscopic and potentiometric study. , 2001, Analytical chemistry.

[6]  S. Nomura,et al.  Stability of a Ag/AgCl reference electrode equipped with an ionic liquid salt bridge composed of 1-methyl-3-octylimidazolium bis(trifluoromethanesulfonyl)-amide in potentiometry of pH standard buffers. , 2010, Analytical sciences : the international journal of the Japan Society for Analytical Chemistry.

[7]  Werner E. Morf,et al.  Reference electrode with free-flowing free-diffusion liquid junction , 1986 .

[8]  W. Waghorne.  Invited Review Solubilities of the Silver Halides in Aqueous Mixtures of Methanol, Acetonitrile, and Dimethylsulfoxide , 2003 .

[9]  P. D'Orazio,et al.  Hypertonic versus Isotonic Salt Bridges in Ion-Selective Electrode Based Clinical Analysers , 1991, Annals of clinical biochemistry.

[10]  M. Senda,et al.  The Liquid-Junction Potential at the Contact of Two Immiscible Electrolyte Solutions in the Absence of Supporting Electrolytes Reference Electrodes Reversible to Alkylammonium Ions and Tetraphenylborate Ion in Nitrobenzene , 1987 .

[11]  J. Fuller,et al.  Ionic Liquid‐Polymer Gel Electrolytes , 1997 .

[12]  T. Kakiuchi,et al.  Phase-boundary potential across the nonpolarized interface between the room-temperature molten salt and water , 2003 .

[13]  Dermot Diamond,et al.  Guidelines for Improving the Lower Detection Limit of Ion‐Selective Electrodes: A Systematic Approach , 2007 .

[14]  Eric Bakker,et al.  Solid contact potentiometric sensors for trace level measurements. , 2006, Analytical chemistry.

[15]  A. Bard,et al.  Metal/polypyrrole quasi-reference electrode for voltammetry in nonaqueous and aqueous solutions. , 2006, Analytical chemistry.

[16]  Pretsch,et al.  Cationic or anionic sites? Selectivity optimization of ion-selective electrodes based on charged ionophores , 2000, Analytical chemistry.

[17]  Ernö Pretsch,et al.  Carrier-Based Ion-Selective Electrodes and Bulk Optodes. 1. General Characteristics. , 1997, Chemical reviews.

[18]  A. Stein,et al.  Ion-selective electrodes with three-dimensionally ordered macroporous carbon as the solid contact. , 2007, Analytical chemistry.

[19]  Andreas Stein,et al.  Subnanomolar detection limit application of ion-selective electrodes with three-dimensionally ordered macroporous (3DOM) carbon solid contacts , 2009, Journal of solid state electrochemistry : current research and development in science and technology.

[20]  H. Murakami,et al.  Use of Highly Hydrophobic Ionic Liquids for Ion-selective Electrodes of the Liquid Membrane Type , 2008, Analytical sciences : the international journal of the Japan Society for Analytical Chemistry.

[21]  P. Bühlmann,et al.  Response Mechanism of Ion-Selective Electrodes Based on a Guanidine Ionophore: An Apparently ‘Two-Thirds Nernstian’ Response Slope , 2008 .

[22]  E. Bakker.  Hydrophobic Membranes as Liquid Junction-Free Reference Electrodes , 1999 .

[23]  J. Foropoulos,et al.  Synthesis, properties, and reactions of bis((trifluoromethyl)sulfonyl) imide, (CF3SO2)2NH , 1984 .

[24]  Johan Bobacka,et al.  Solid‐Contact Reference Electrodes Based on Lipophilic Salts , 2009 .

[25]  T. Kakiuchi,et al.  Ionic Liquid Salt Bridge in Dilute Aqueous Solutions , 2007, Analytical sciences : the international journal of the Japan Society for Analytical Chemistry.

[26]  T. Kakiuchi,et al.  Determination of the activity of hydrogen ions in dilute sulfuric acids by use of an ionic liquid salt bridge sandwiched by two hydrogen electrodes. , 2011, Analytical chemistry.

[27]  E. Hall,et al.  All‐Solid‐State Reference Electrodes with Poly(n‐butyl acrylate) Based Membranes , 2008 .

[28]  A. Michalska,et al.  Lowering the Detection Limit of Ion-Selective Plastic Membrane Electrodes with Conducting Polymer Solid Contact and Conducting Polymer Potentiometric Sensors , 2003 .

[29]  Takashi Kakiuchi,et al.  New class of Ag/AgCl electrodes based on hydrophobic ionic liquid saturated with AgCl. , 2007, Analytical chemistry.

[30]  Takashi Kakiuchi,et al.  Salt bridge in electroanalytical chemistry: past, present, and future , 2011 .

[31]  B. Buckley,et al.  Protein Interference with Ion-Selective Electrode Measurement Depends on Reference Electrode Composition and Design , 1991, Annals of clinical biochemistry.

[32]  T. Kakiuchi,et al.  A new salt bridge based on the hydrophobic room-temperature molten salt , 2006 .

[33]  P. Bühlmann,et al.  Hydrogen bond based recognition of nucleotides by neutral-carrier ion-selective electrodes , 1997 .

[34]  A. Kisiel,et al.  Plastic reference electrodes and plastic potentiometric cells with dispersion cast poly(3,4-ethylenedioxythiophene) and poly(vinyl chloride) based membranes. , 2007, Bioelectrochemistry.

[35]  T. Kakiuchi.  Mutual Solubility of Hydrophobic Ionic Liquids and Water in Liquid-Liquid Two-phase Systems for Analytical Chemistry , 2008, Analytical sciences : the international journal of the Japan Society for Analytical Chemistry.

[36]  E. Pretsch,et al.  Large Improvement of the Lower Detection Limit of Ion-Selective Polymer Membrane Electrodes , 1997 .

[37]  A. Kisiel,et al.  Polyacrylate microspheres composite for all-solid-state reference electrodes. , 2010, The Analyst.

[38]  A. Stein,et al.  Highly selective detection of silver in the low ppt range with ion-selective electrodes based on ionophore-doped fluorous membranes. , 2010, Analytical chemistry.

[39]  Ernö Pretsch,et al.  Lowering the Detection Limit of Solvent Polymeric Ion-Selective Membrane Electrodes. 2. Influence of Composition of Sample and Internal Electrolyte Solution , 1999 .

[40]  P. Bühlmann,et al.  A generalized model for apparently "non-Nernstian" equilibrium responses of ionophore-based ion-selective electrodes. 1. Independent complexation of the ionophore with primary and secondary ions. , 2003, Analytical chemistry.

[41]  J. Fuller,et al.  Ionic liquid–polymer gel electrolytes from hydrophilic and hydrophobic ionic liquids , 1998 .

[42]  P. Bühlmann,et al.  Co-Ion Interference for Ion-Selective Electrodes Based on Charged and Neutral Ionophores: A Comparison , 1998 .

[43]  P. Bühlmann,et al.  Visible and FTIR Microscopic Observation of Bisthiourea Ionophore Aggregates in Ion‐Selective Electrode Membranes , 2005 .

[44]  Ernö Pretsch,et al.  Solid-contact polymeric membrane electrodes with detection limits in the subnanomolar range , 2004 .

[45]  A. Stein,et al.  Effects of architecture and surface chemistry of three-dimensionally ordered macroporous carbon solid contacts on performance of ion-selective electrodes. , 2010, Analytical chemistry.

[46]  Elizabeth A. Amin,et al.  Coordinative properties of highly fluorinated solvents with amino and ether groups. , 2005, Journal of the American Chemical Society.

[47]  J. Mcfarlane,et al.  Room‐Temperature Ionic Liquids in Liquid–Liquid Extraction: Effects of Solubility in Aqueous Solutions on Surface Properties , 2006 .