A RAPID COMPRESSION MACHINE FOR CHEMICAL KINETICS STUDIES AT ELEVATED PRESSURES AND TEMPERATURES

A rapid compression machine (RCM) has been designed and fabricated for the purpose of chemical kinetics studies at elevated pressures and temperatures. The present RCM is pneumatically driven and hydraulically actuated and stopped. Stroke of the machine varies from 7 to 10 inches and clearance is also adjustable. Compression ratio of up to 21 can be obtained. The optically-accessible reaction chamber is equipped with sensors for the measurements of pressure and temperature. In addition, a rapid sampling apparatus is incorporated in the reaction chamber for determining species concentration at specific post-compression time. A deliberately machined crevice on the cylindrical surface of the piston has been optimized, using STAR-CD CFD package, in order to suppress the formation of the roll-up vortex and provide a homogeneous core of reaction mixture. Temperature mapping using planar laser induced fluorescence of acetone shows that roll-up vortex is indeed suppressed by using the present creviced piston. Experiments with either inert gases or reactive mixtures demonstrate the reproducibility of pressure traces. Compression process is also shown to be very rapid and free from any significant mechanical vibrations. Measurements show that highly repeatable compressed conditions of up to 50 bar and greater than 1000 K can be obtained. A numerical model accounting for heat loss is also developed to simulate the RCM data. This work documents the design and operation of the present RCM as well as establishes its suitability for combustion studies.

[1]  John B. Heywood,et al.  Two-stage ignition in HCCI combustion and HCCI control by fuels and additives , 2003 .

[2]  M. Ribaucour,et al.  A rapid compression machine investigation of oxidation and auto-ignition of n-Heptane: Measurements and modeling , 1995 .

[3]  W. S. Affleck,et al.  An Opposed Piston Rapid Compression Machine for Preflame Reaction Studies , 1968 .

[4]  Philippe Dagaut,et al.  Experimental study of the oxidation of n-heptane in a jet stirred reactor from low to high temperature and pressures up to 40 atm , 1995 .

[5]  Chih-Jen Sung,et al.  Aerodynamics inside a rapid compression machine , 2006 .

[6]  Shigeyuki Tanaka,et al.  A reduced chemical kinetic model for HCCI combustion of primary reference fuels in a rapid compression machine , 2003 .

[7]  R. Hanson,et al.  Measurements and modeling of acetone laser-induced fluorescence with implications for temperature-imaging diagnostics. , 1998, Applied optics.

[8]  T. J. Held,et al.  Autoignition Chemistry Studies of n-Butane in a Variable Pressure Flow Reactor , 1991 .

[9]  W. Kordylewski,et al.  Experimental and numerical studies of ditertiary butyl peroxide combustion at high pressures in a rapid compression machine , 1993 .

[10]  M. Ribaucour,et al.  Experimental and modeling study of oxidation and autoignition of butane at high pressure , 1994 .

[11]  Simone Hochgreb,et al.  Rapid Compression Machines: Heat Transfer and Suppression of Corner Vortex , 1998 .

[12]  M. Ribaucour,et al.  The chemistry of pre-ignition of n-pentane and 1-pentene , 1999 .

[13]  Peter Gray,et al.  Rapid compression studies on spontaneous ignition of isopropyl nitrate Part II: Rapid sampling, intermediate stages and reaction mechanisms , 1980 .

[14]  L.H.S. Roblee,et al.  A technique for sampling reaction intermediates in a rapid compression machine , 1961 .

[15]  C. Westbrook,et al.  A Comprehensive Modeling Study of iso-Octane Oxidation , 2002 .

[16]  William J. Pitz,et al.  Ignition of Isomers of Pentane: An Experimental and Kinetic Modeling Study , 2000 .

[17]  James C. Keck,et al.  Rapid compression machine measurements of ignition delays for primary reference fuels , 1990 .

[18]  J. Griffiths,et al.  Spontaneous ignition delays as a diagnostic of the propensity of alkanes to cause engine knock , 1997 .

[19]  Richard A. Yetter,et al.  New results on moist CO oxidation: high pressure, high temperature experiments and comprehensive kinetic modeling , 1994 .

[20]  D. J. Rose,et al.  Fundamental features of hydrocarbon autoignition in a rapid compression machine , 1993 .

[21]  Peter Gray,et al.  Rapid compression studies on spontaneous ignition of isopropyl nitrate art I: Nonexplosive decomposition, explosive oxidation and conditions for safe handling , 1980 .

[22]  John M. Simmie,et al.  The influence of fuel structure on combustion as demonstrated by the isomers of heptane: a rapid compression machine study , 2005 .

[23]  L. Gasnot,et al.  Instantaneous temperature measurement in a rapid-compression machine using laser Rayleigh scattering , 1995 .

[24]  Benjamin J. Whitaker,et al.  Thermokinetic interactions leading to knock during homogeneous charge compression ignition , 2002 .

[25]  John M. Simmie,et al.  Simulation of methane autoignition in a rapid compression machine with creviced pistons , 2001 .

[26]  M. Ribaucour,et al.  Autoignition Delays of a Series of Linear and Branched Chain Alkanes in the Intermediate Range of Temperature , 1996 .

[27]  F. Egolfopoulos,et al.  An optimized kinetic model of H2/CO combustion , 2005 .

[28]  William J. Pitz,et al.  Detailed chemical kinetic reaction mechanisms for autoignition of isomers of heptane under rapid compression , 2002 .

[29]  R. Minetti,et al.  Temperature Distribution Induced by Pre-lgnition Reactions in a Rapid Compression Machine , 1996 .

[30]  H. Daneshyar,et al.  Vortex motion induced by the piston of an internal combustion engine , 1973 .

[31]  Bradley T. Zigler,et al.  Demonstration of a Free-Piston Rapid Compression Facility for the Study of High Temperature Combustion Phenomena , 2004 .

[32]  M. Ribaucour,et al.  Comparison of oxidation and autoignition of the two primary reference fuels by rapid compression , 1996 .

[33]  John M. Simmie,et al.  CFD studies of a twin-piston rapid compression machine , 2005 .

[34]  C. Westbrook,et al.  A comprehensive modeling study of hydrogen oxidation , 2004 .

[35]  Zhenwei Zhao,et al.  An updated comprehensive kinetic model of hydrogen combustion , 2004 .

[36]  Benjamin J. Whitaker,et al.  Temperature fields during the development of combustion in a rapid compression machine , 2001 .

[37]  R. J. Kee,et al.  Chemkin-II : A Fortran Chemical Kinetics Package for the Analysis of Gas Phase Chemical Kinetics , 1991 .