ArF immersion lithography has opened the road towards increased optical resolution at the 193nm wavelength. Consequently, keeping the same 4X optical demagnification factor, the dimensions on the mask scale down to sub-wavelength values when we enter the 45nm node. At such dimensions, mask topography, mask type and materials as well as the polarization state of the light will influence the diffraction spectrum of a layout. As a result the image from high NA lithographic systems depends on the polarization state and intensities of the interfering orders. In general, with smaller features on the mask stronger polarization changes occur. Apart from the polarization changes in diffraction orders the total intensity in a diffraction order is also different from that predicted by standard scalar-Kirchhoff diffraction approximation used in present OPC packages. The difference in intensities of diffraction orders due to different mask materials and topography is the more dominating factor leading to through pitch CD errors when the scalar-Kirchhoff model is used for layout adjustment. Based on findings and classification of topography induced effects, a deviation-driver from scalar diffraction model was identified. This paper discusses a solution to compensate for topography effects while using the scalar diffraction model for reticle treatment. The area of applicability of such a scalar model, its advantages and limitations are illustrated with simulations and experiments.
[1]
Peter Zandbergen,et al.
Influence of mask induced polarization effects on a pattern printability
,
2004,
SPIE Advanced Lithography.
[2]
Andreas Erdmann,et al.
Mask modeling in the low k1 and ultrahigh NA regime: phase and polarization effects (Invited Paper)
,
2005,
Other Conferences.
[3]
Lars W. Liebmann,et al.
Pattern-dependent correction of mask topography effects for alternating phase-shifting masks
,
1995,
Advanced Lithography.
[4]
H. P. Urbach,et al.
Three-dimensional rigorous simulation of mask-induced polarization
,
2004,
SPIE Advanced Lithography.
[5]
Vicky Philipsen,et al.
Optimizing absorber thickness of attenuating phase-shifting masks for hyper-NA lithography
,
2006,
SPIE Advanced Lithography.
[6]
Neal Lafferty,et al.
Mask-induced polarization
,
2004,
SPIE Advanced Lithography.
[7]
E. H. Linfoot.
Principles of Optics
,
1961
.
[8]
H P Urbach,et al.
Rigorous model of the scattering of a focused spot by a grating and its application in optical recording.
,
2003,
Journal of the Optical Society of America. A, Optics, image science, and vision.