Numerical Investigation and Optimization of Cooling Flow Field Design for Proton Exchange Membrane Fuel Cell

High temperatures and non-uniform temperatures both have a negative bearing on the performance of proton exchange membrane fuel cells. The temperature of proton exchange membrane fuel cells can be lowered by reasonably distributed cooling channels. The flow field distribution of five different cooling plates is designed, and the temperature uniformity, pressure drop and velocity of each cooling flow field are analyzed by computational fluid dynamics technology. The results show that while the pressure drop is high, the flow channel distribution of a multi-spiral flow field and honeycomb structure flow field contribute more to improving the temperature uniformity. As the coolant is blocked by the uniform plate, it is found that although the flow field channel with a uniform plate has poor performance in terms of temperature uniformity, its heat dissipation capacity is still better than that of the traditional serpentine flow field. The multi-spiral flow field has the strongest ability to maintain the temperature stability in the cooling plate when the heat flux increases. The increase in Reynolds number, although increasing the pressure drop, can reduce the maximum temperature and temperature difference of the flow field, ameliorate the temperature uniformity and improve the heat transfer capacity of the cooling plate.

[1]  Thermal management of polymer electrolyte membrane fuel cells: A critical review of heat transfer mechanisms, cooling approaches, and advanced cooling techniques analysis , 2022, Energy Conversion and Management.

[2]  Zhengguo Zhang,et al.  Thermochemical heat storage system for preventing battery thermal runaway propagation using sodium acetate trihydrate/expanded graphite , 2021, Chemical Engineering Journal.

[3]  M. Dhimish,et al.  Investigating the stability and degradation of hydrogen PEM fuel cell , 2021, International Journal of Hydrogen Energy.

[4]  Linfa Peng,et al.  Towards mass applications: A review on the challenges and developments in metallic bipolar plates for PEMFC , 2020, Progress in Natural Science: Materials International.

[5]  Ying Huang,et al.  High thermal conductivity and mechanical properties of Si@Graphite/Aluminum nitride/aluminum composites for high-efficiency thermal management , 2020 .

[6]  M. Rahimi-Esbo,et al.  Novel design and numerical evaluating of a cooling flow field in PEMFC with metallic bipolar plates , 2020 .

[7]  Qifei Jian,et al.  Thermal performance enhancement of air-cooled proton exchange membrane fuel cells by vapor chambers , 2020 .

[8]  M. Ziaei-Rad,et al.  Numerical thermal analysis of nanofluid flow through the cooling channels of a polymer electrolyte membrane fuel cell filled with metal foam , 2020, International Journal of Energy Research.

[9]  Yun Wang,et al.  Three-dimensional simulation of a new cooling strategy for proton exchange membrane fuel cell stack using a non-isothermal multiphase model , 2019, Applied Energy.

[10]  Junliang Zhang,et al.  Optimization of configurations and cathode operating parameters on liquid-cooled proton exchange membrane fuel cell stacks by orthogonal method , 2019, Applied Energy.

[11]  B. Sundén,et al.  Numerical study on thermal performance of non-uniform flow channel designs for cooling plates of PEM fuel cells , 2018, Numerical Heat Transfer, Part A: Applications.

[12]  A. Amirfazli,et al.  An investigation into the effect of manifold geometry on uniformity of temperature distribution in a PEMFC stack , 2018 .

[13]  Abdul-Ghani Olabi,et al.  Development of Bi-polar plate design of PEM fuel cell using CFD techniques , 2017 .

[14]  A. Ranjbar,et al.  A numerical study on thermal analysis and cooling flow fields effect on PEMFC performance , 2017 .

[15]  A. Ranjbar,et al.  Thermal investigation of a PEM fuel cell with cooling flow field , 2017 .

[16]  Wei Liu,et al.  Multi-objective optimization of operating conditions and channel structure for a proton exchange membrane fuel cell , 2017 .

[17]  Min-Soo Kim,et al.  Parametric analysis of simultaneous humidification and cooling for PEMFCs using direct water injection method , 2017 .

[18]  Min-Soo Kim,et al.  An experimental study on the cathode humidification and evaporative cooling of polymer electrolyte membrane fuel cells using direct water injection method at high current densities , 2016 .

[19]  Rahman Saidur,et al.  Thermal analysis of Al2O3–water ethylene glycol mixture nanofluid for single PEM fuel cell cooling plate: An experimental study , 2016 .

[20]  Bruno Auvity,et al.  Experimental study of the thermal performance of chaotic geometries for their use in PEM fuel cells , 2016 .

[21]  W. Mohamed,et al.  Experimental thermal analysis on air cooling for closed-cathode Polymer Electrolyte Membrane fuel cells , 2015 .

[22]  Sang Yong Nam,et al.  A review of polymer–nanocomposite electrolyte membranes for fuel cell application , 2015 .

[23]  Ebrahim Afshari,et al.  A study on using metal foam as coolant fluid distributor in the polymer electrolyte membrane fuel cell , 2014 .

[24]  Michio Inagaki,et al.  Thermal Management Material: Graphite , 2014 .

[25]  S. Ravishankar,et al.  Numerical studies on thermal performance of novel cooling plate designs in polymer electrolyte membrane fuel cell stacks , 2014 .

[26]  D. Jeon.  Numerical study of serpentine flow‐field cooling plates on PEM fuel cells performance , 2013 .

[27]  Frano Barbir,et al.  Designing heat exchanger with spatially variable surface area for passive cooling of PEM fuel cell , 2013 .

[28]  Arun S. Mujumdar,et al.  Numerical evaluation of various gas and coolant channel designs for high performance liquid-cooled proton exchange membrane fuel cell stacks , 2012 .

[29]  Y. Bultel,et al.  Tools for designing the cooling system of a proton exchange membrane fuel cell , 2012 .

[30]  X. Yang,et al.  Matching of water and temperature fields in proton exchange membrane fuel cells with non-uniform distributions , 2011 .

[31]  Seung Man Baek,et al.  A numerical study on uniform cooling of large-scale PEMFCs with different coolant flow field designs , 2011 .

[32]  N. Brandon,et al.  Model based design and test of cooling plates for an air-cooled polymer electrolyte fuel cell stack , 2011 .

[33]  Arun S. Mujumdar,et al.  Numerical investigation of laminar heat transfer performance of various cooling channel designs , 2011 .

[34]  C. Wen,et al.  Thermal management of a proton exchange membrane fuel cell stack with pyrolytic graphite sheets and , 2011 .

[35]  J. Andrews,et al.  An experimental investigation of a PEM fuel cell to supply both heat and power in a solar-hydrogen RAPS system , 2011 .

[36]  Saeed Asghari,et al.  Design of thermal management subsystem for a 5 kW polymer electrolyte membrane fuel cell system , 2011 .

[37]  Jin Hyun Nam,et al.  Numerical study to examine the performance of multi-pass serpentine flow-fields for cooling plates in polymer electrolyte membrane fuel cells , 2009 .

[38]  Frano Barbir,et al.  Status and development of PEM fuel cell technology , 2008 .

[39]  Jiujun Zhang,et al.  A review of water flooding issues in the proton exchange membrane fuel cell , 2008 .

[40]  D. Mahajan,et al.  Metal bipolar plates for PEM fuel cell—A review , 2007 .