The design of a new remote manipulator for space operation using a 4-cable-driven thrusters-embedded configuration

A new remote manipulator based on cable-driven parallel mechanism (CDPM) is designed for space long-distance operations (e.g. space capture/docking and other long-distance space activities) in this paper. By controlling the cables and thrusters which are equipped on the manipulator simultaneously, the new remote manipulator can achieve expected position, linear velocity, and angular velocity. The new manipulator has a larger controllable workspace compared with usual CDPMs. The structure and characteristics of this manipulator are discussed in this paper. The volume and characteristics of the workspace are also discussed. The influence of the distance on the static equilibrium is studied. The simulation results show that the workspace of this new manipulator is larger than usual CDPM’s. The results also indicate that the cable forces and thruster vectors can completely constrain the manipulator and meet the requirements of space activities. The results of the simulation also show that the controllable workspace of the manipulator is not continuous at some regions. Hence, trajectory planning is necessary.

[1]  Jonathan Fink,et al.  Cooperative Towing With Multiple Robots , 2008 .

[2]  Marco Carricato,et al.  Direct Geometrico-Static Analysis of Under-Constrained Cable-Driven Parallel Robots with 4 Cables , 2013 .

[3]  Nathan Michael,et al.  Kinematics and Statics of Cooperative Multi-Robot Aerial Manipulation With Cables , 2009 .

[4]  Eric Martin,et al.  Autonomous capture of a tumbling satellite: Research Articles , 2007 .

[5]  Joseph A. Bonometti.  Boom Rendezvous Alternative Docking Approach , 2006 .

[6]  Toshiya Hanada,et al.  Benefits and risks of using electrodynamic tethers to de-orbit spacecraft , 2006 .

[7]  Tohru Suzuki,et al.  Results of the ETS-7 Mission - Rendezvous Docking and Space Robotics Experiments , 1999 .

[8]  Kazuya Yoshida,et al.  Dynamics, control and impedance matching for robotic capture of a non-cooperative satellite , 2004, Adv. Robotics.

[9]  Dennis Wingo.  Orbital Recovery's Responsive Commercial Space Tug for Life Extension Missions , 2004 .

[10]  Hironori A. Fujii,et al.  In-plane payload capture using tethers , 2005 .

[11]  Panfeng Huang,et al.  Post-capture attitude control for a tethered space robot–target combination system , 2014, Robotica.

[12]  Julia Badger,et al.  Robonaut 2 - Building a Robot on the International Space Station , 2015 .

[13]  Samuel B. Wilson,et al.  DARPA Orbital Express program: effecting a revolution in space-based systems , 2000, SPIE Optics + Photonics.

[14]  Yoshiaki Ohkami,et al.  FLY-BY APPROACH AND GUIDANCE FOR UNCONTROLLED ROTATING SATELITE CAPTURE , 2003 .

[15]  Terrence Fong,et al.  Astrobee: Developing a Free Flying Robot for the International Space Station , 2015 .

[16]  Fan Zhang,et al.  Dynamics and configuration control of the Maneuvering-Net Space Robot System , 2015 .

[17]  Stephen K. Jacobsen,et al.  Approach Planning and Guidance for Uncontrolled Rotating Satellite Capture Considering Collision Avoidance , 2003 .

[18]  Ioannis M. Rekleitis,et al.  Autonomous capture of a tumbling satellite , 2007, J. Field Robotics.

[19]  Bin Liang,et al.  On-orbit capture with flexible tether–net system , 2009 .

[20]  Kazuya Yoshida,et al.  Engineering Test Satellite VII Flight Experiments for Space Robot Dynamics and Control: Theories on Laboratory Test Beds Ten Years Ago, Now in Orbit , 2003, Int. J. Robotics Res..

[21]  J. Kouwen,et al.  The ERA System: Control Architecture and Performances Results , 2001 .

[22]  Gerhard Roth,et al.  Pose Determination and Tracking for Autonomous Satellite Capture , 2001 .

[23]  Hui Li,et al.  Conceptual Kinematic Design and Performance Evaluation of a Chameleon-Like Service Robot for Space Stations , 2015 .

[24]  Mo Jamshidi,et al.  Robotics and remote systems for hazardous environments , 1993 .

[25]  Vijay Kumar,et al.  Cooperative manipulation and transportation with aerial robots , 2009, Auton. Robots.

[26]  Guilin Yang,et al.  A generic force-closure analysis algorithm for cable-driven parallel manipulators , 2011 .