Optimization of UAV structure and evaluation of vibrational and fatigue characteristics through simulation studies

Unmanned Aerial Vehicles (UAV) is generic air vehicles that are significantly developed for military and civil purposes. In recent times, advancements in the field of UAVs are exceptional and tremendous. Nevertheless, numerous researches have been performed mainly to reduce the weight of the UAV structure. The flight time and allowable payload rely on the UAV structure's weight, which is considered a significant factor. Hence, in this paper, the UAV model's static structural behavior is cultivated utilizing the morals of Finite Element Analysis (FEA) to determine the total deformation and Von-mises stress. Three different polymer materials, namely Poly Lactic Acid (PLA), Acrylonitrile Butadiene Styrene (ABS), and Polyamide (PA), are chosen for FEA analysis of 3D printed UAV structure. The thrust generated from the motors varies from 2 kg to 5 kg, and an evaluation of structural strength characteristics is performed. The FEA study has shown that maximum deformation and maximum stress are obtained at the propeller casings and the basement of the structure, respectively. After comparing the details on deformation and stress from all three materials, the research also reveals that PLA is the best material for conception. Furthermore, topological optimization is performed on the UAV structure to reduce mass and minimize stress without compromising mechanical strength. The vibrational and fatigue characteristics of optimized UAV structure is examined. The unified body of the UAV frame will reduce the assembly time and make manufacturing much more effortless.

[1]  Noor A. Ahmed,et al.  Manufacture of an Unmanned Aerial Vehicle (UAV) for Advanced Project Design Using 3D Printing Technology , 2013 .

[2]  George I. N. Rozvany,et al.  A critical review of established methods of structural topology optimization , 2009 .

[3]  Thomas Lagkas,et al.  A compilation of UAV applications for precision agriculture , 2020, Comput. Networks.

[4]  Balasubramanian Esakki,et al.  Development of 3D-printed floating Quadrotor for collection of algae in remote water bodies , 2019, Comput. Electron. Agric..

[5]  Lung-Jieh Yang,et al.  Development of Flapping Ornithopters by Precision Injection Molding , 2012 .

[6]  Ole Sigmund,et al.  Length scale and manufacturability in density-based topology optimization , 2016, Archive of Applied Mechanics.

[7]  Yongsheng Ma,et al.  3D level-set topology optimization: a machining feature-based approach , 2015 .

[8]  2020 4th International Conference on Trends in Electronics and Informatics (ICOEI)(48184) , 2020 .

[9]  Experimental Investigations for Improving the Strength of Parts Manufactured Using FDM Process , 2018, Lecture Notes in Mechanical Engineering.

[10]  Qi Xia,et al.  A level set based method for the optimization of cast part , 2010 .

[11]  Fu-Yuen Hsiao,et al.  Autopilots for Ultra Lightweight Robotic Birds: Automatic Altitude Control and System Integration of a Sub-10 g Weight Flapping-Wing Micro Air Vehicle , 2012, IEEE Control Systems.

[12]  M. Bendsøe,et al.  Material interpolation schemes in topology optimization , 1999 .

[13]  Mohsen Guizani,et al.  Unmanned Aerial Vehicles (UAVs): A Survey on Civil Applications and Key Research Challenges , 2018, IEEE Access.

[14]  Brent Langhals,et al.  Applications of Unmanned Aerial Systems (UAS): A Delphi Study Projecting Future UAS Missions and Relevant Challenges , 2020, Drones.

[15]  Lung-Jieh Yang,et al.  The Micro-Air-Vehicle Golden Snitch and Its Figure-of-8 Flapping , 2012 .

[16]  Xu Guo,et al.  Explicit feature control in structural topology optimization via level set method , 2014 .

[17]  Wai Yee Yeong,et al.  Additive manufacturing in unmanned aerial vehicles (UAVs): Challenges and potential , 2017 .

[18]  Abhijith Valsan,et al.  Unmanned Aerial Vehicle for Search and Rescue Mission , 2020, 2020 4th International Conference on Trends in Electronics and Informatics (ICOEI)(48184).

[19]  James K. Guest,et al.  Achieving minimum length scale in topology optimization using nodal design variables and projection functions , 2004 .

[20]  G. Allaire,et al.  Thickness control in structural optimization via a level set method , 2016, Structural and Multidisciplinary Optimization.

[21]  Yongsheng Ma,et al.  A survey of manufacturing oriented topology optimization methods , 2016, Adv. Eng. Softw..

[22]  Lakmal Seneviratne,et al.  Fused Deposition Modeling for Unmanned Aerial Vehicles (UAVs): A Review , 2018 .

[23]  N. Jawahar,et al.  Enhancement of Anisotropic Strength of Fused Deposited ABS Parts by Genetic Algorithm , 2016 .

[24]  Hirpa G. Lemu,et al.  A case study on topology optimized design for additive manufacturing , 2017, IOP Conference Series: Materials Science and Engineering.

[25]  Udayagiri Chandrasekhar,et al.  Development of light weight multi-rotor UAV structures through synergistic application of design analysis and fused deposition modelling , 2019 .

[26]  Xiaoming Wang,et al.  A level set method for structural topology optimization , 2003 .

[27]  P. Wright,et al.  Anisotropic material properties of fused deposition modeling ABS , 2002 .

[28]  Seung Ki Moon,et al.  Application of 3D printing technology for designing light-weight unmanned aerial vehicle wing structures , 2014, International Journal of Precision Engineering and Manufacturing-Green Technology.

[29]  G. Allaire,et al.  Structural optimization using sensitivity analysis and a level-set method , 2004 .

[30]  James K. Guest,et al.  Imposing maximum length scale in topology optimization , 2009 .

[31]  O. Sigmund,et al.  Topology optimization approaches , 2013, Structural and Multidisciplinary Optimization.

[32]  Yosoon Choi,et al.  Applications of Unmanned Aerial Vehicles in Mining from Exploration to Reclamation: A Review , 2020, Minerals.

[33]  Charlie C. L. Wang,et al.  Current and future trends in topology optimization for additive manufacturing , 2018 .