On a sensitivity function of input shaping control

The performance of input shaping control has been conventionally estimated by a sensitivity function V, but the numerical relationship between the sensitivity function V and maximum residual vibration has not been clear in a quantitative viewpoint. In this paper, we define clearly the sensitivity function in impulse response and step response graphically, and then present the relationship between the sensitivity function and the magnitude of residual vibration responses. The validity of the assertion is demonstrated by means of simulation and experimental studies.

[1]  Eun Jeong Lee,et al.  Design of learning input shaping technique for residual vibration suppression in an industrial robot , 2006 .

[2]  Warren P. Seering,et al.  Preshaping Command Inputs to Reduce System Vibration , 1990 .

[3]  William Singhose,et al.  Performance studies of human operators driving double-pendulum bridge cranes , 2010 .

[4]  William Singhose,et al.  Command shaping for flexible systems: A review of the first 50 years , 2009 .

[5]  William Singhose,et al.  Comparison of robust input shapers , 2008 .

[6]  William Singhose,et al.  Verifying Robust Time-Optimal Commands for Multimode Flexible Spacecraft , 1997 .

[7]  Warren P. Seering,et al.  Time-Optimal Negative Input Shapers , 1997 .

[8]  Chul-Goo Kang.  Performance Measure of Residual Vibration Control , 2011 .

[9]  William Singhose,et al.  On-Off Control With Specified Fuel Usage , 1999 .

[10]  Chul-Goo Kang.  On the derivative constraints of input shaping control , 2011 .

[11]  Warren P. Seering,et al.  Residual Vibration Reduction Using Vector Diagrams to Generate Shaped Inputs , 1994 .

[12]  William Singhose,et al.  A controller enabling precise positioning and sway reduction in bridge and gantry cranes , 2007 .

[13]  Warren P. Seering,et al.  Convolved and simultaneous two-mode input shapers , 1997 .

[14]  William Singhose,et al.  Robust Negative Input Shapers for Vibration Suppression , 2009 .

[15]  Hoon Cheol Park,et al.  Vibration suppression of a flexible robot manipulator with a lightweight piezo-composite actuator , 2009 .

[16]  M. Grassi,et al.  AIAA Guidance, Navigation, and Control Conference , 2008 .

[17]  S. S. Gürleyük,et al.  Robust Three-impulse Sequence Input Shaper Design , 2007 .

[18]  George Vukovich,et al.  Nonlinear Input Shaping Control of Flexible Spacecraft Reorientation Maneuver , 1998 .

[19]  Sadettin Kapucu,et al.  Residual swing/vibration reduction using a hybrid input shaping method , 2001 .

[20]  William Singhose,et al.  Performance Measures For Input Shaping and Command Generation , 2006 .

[21]  A. Galip Ulsoy,et al.  An Approach to Control Input Shaping With Application to Coordinate Measuring Machines , 1999 .

[22]  Keum-Shik Hong,et al.  Boundary control of container cranes from the perspective of controlling an axially moving string system , 2009 .

[23]  J. Pierce.  The Proceedings of the IRE , 1954, Proceedings of the IRE.

[24]  Lucy Y. Pao,et al.  Robust Input Shaper Control Design for Parameter Variations in Flexible Structures , 2000 .

[25]  O. Smith.  Posicast Control of Damped Oscillatory Systems , 1957 .