Conversion of Residual Biomass into Liquid Transportation Fuel: An Energy Analysis

An energy balance, in broad outline, is presented for the production of a high-quality liquid transportation fuel from residual crop biomass. The particular process considered is comprised of (1) harvesting surplus biomass (such as crop residue); (2) locally pyrolyzing the biomass into pyrolysis oil (PO), char, and noncondensable gas (NCG); (3) transporting the PO to a remote central processing facility; (4) converting the PO at this facility by autothermal reforming (ATR) into synthesis gas (CO and H2); followed by, at the same facility, (5) Fischer–Tropsch (FT) synthesis of the syngas into diesel fuel. In carrying out our calculations, we have made several assumptions about the values of the process parameters. These parameters, of course, can be modified as better input data become available. The material and energy balance has been incorporated into an Excel spreadsheet. The scope and our approach to the energy budget using a widely available spreadsheet hopefully provides greater transparency, as wel...

[1]  Bruce E. Dale,et al.  Projected mature technology scenarios for conversion of cellulosic biomass to ethanol with coproduction thermochemical fuels, power, and/or animal feed protein , 2009 .

[2]  Nathanael Greene,et al.  The role of biomass in America's energy future: framing the analysis , 2009 .

[3]  Nathanael Greene,et al.  Comparative analysis of efficiency, environmental impact, and process economics for mature biomass refining scenarios , 2009 .

[4]  Akwasi A. Boateng,et al.  Distributed processing of biomass to bio‐oil for subsequent production of Fischer‐Tropsch liquids , 2008 .

[5]  Rakesh Agrawal,et al.  Sustainable fuel for the transportation sector , 2007, Proceedings of the National Academy of Sciences.

[6]  Akwasi A. Boateng,et al.  Chemical Composition of Bio-oils Produced by Fast Pyrolysis of Two Energy Crops † , 2008 .

[7]  Thomas Sandahl Christensen,et al.  Recent developments in autothermal reforming and pre-reforming for synthesis gas production in GTL applications , 2003 .

[8]  Rakesh Agrawal,et al.  Estimation of liquid fuel yields from biomass. , 2010, Environmental science & technology.

[9]  S. Kersten,et al.  Evaporation of pyrolysis oil: Product distribution and residue char analysis , 2010 .

[10]  Raf Dewil,et al.  Fundamentals, kinetics and endothermicity of the biomass pyrolysis reaction , 2010 .

[11]  A. Faaij,et al.  Exploration of the possibilities for production of Fischer Tropsch liquids and power via biomass gasification , 2002 .

[12]  Eric D. Larson,et al.  Making Fischer-Tropsch fuels and electricity from coal and biomass: Performance and cost analysis , 2011 .

[13]  Anthony V. Bridgwater,et al.  Techno-economic modelling of biomass flash pyrolysis and upgrading systems , 1994 .

[14]  V. Velu,et al.  Dry milling characteristics of microwave dried maize grains(Zea mays L.). , 2006 .

[15]  Simone Hochgreb,et al.  Impact of Biomass Pyrolysis Oil Process Conditions on Ignition Delay in Compression Ignition Engines , 2002 .

[16]  Jane M. F. Johnson,et al.  Corn Stover to Sustain Soil Organic Carbon Further Constrains Biomass Supply , 2007 .

[17]  J. Sehested,et al.  Chapter 4 – Synthesis gas production for FT synthesis , 2004 .

[18]  Anja Oasmaa,et al.  Fast Pyrolysis of Forestry Residue. 2. Physicochemical Composition of Product Liquid , 2003 .