Electrospun Microfibrous Membranes with Atmospheric‐Pressure Plasma Surface Modification for the Application in Dye‐Sensitized Solar Cells

Electrospun poly(vinylidenefluoride-co-hexafluoropropylene) (PVDF-HFP) microfibrous membrane was modified by cyclonic atmospheric-pressure plasma in this work. The gas-phase temperature of plasma state was <90°C, indicating that this plasma could treat electrospun PVDF-HFP membrane without heat damages. Surface properties of the plasma-modified electrospun PVDF-HFP membranes were examined by the static contact angle (CA) analysis. It was observed that such cyclonic atmospheric-pressure plasma was useful in electrospun PVDF-HFP membrane surface modification; for example, the water CA was reduced from 137 to <30° with only 1 min treatment time. Field-emission scanning electron microscopy was used to determine the changes in surface features of the electrospun PVDF-HFP membrane after plasma treatment. A dye-sensitized solar cell (DSSC) fabricated with the plasma-modified electrospun PVDF-HFP membrane electrolyte revealed good conversion efficiency. This work proved that surface modification of the electrospun PVDF-HFP microfibrous membrane by cyclonic atmospheric-pressure plasma was an innovative method for DSSC applications.

[1]  Y. Nho,et al.  Dye-sensitized solar cells containing polymer film with honey-comb like morphology , 2009 .

[2]  Suparna Pal,et al.  Evaluation of surface roughness of a plasma treated polymeric membrane by wavelet analysis and quantification of its enhanced performance , 2008 .

[3]  Guido Viscardi,et al.  Combined experimental and DFT-TDDFT computational study of photoelectrochemical cell ruthenium sensitizers. , 2005, Journal of the American Chemical Society.

[4]  S. Lue,et al.  Application of micro-porous polycarbonate membranes in dye-sensitized solar cells: Cell performance and long-term stability , 2010 .

[5]  Guixue Wang,et al.  A novel method for preparing electrospun fibers with nano-/micro-scale porous structures , 2009 .

[6]  M. Awais,et al.  Application of a novel microwave plasma treatment for the sintering of nickel oxide coatings for use in dye-sensitized solar cells , 2011 .

[7]  K. Ho,et al.  Enhancing the performance of dye-sensitized solar cells by incorporating nanosilicate platelets in gel electrolyte , 2009 .

[8]  Jin-Kook Lee,et al.  Effect of electrolyte in electrospun poly(vinylidene fluoride-co-hexafluoropropylene) nanofibers on dye-sensitized solar cells , 2009 .

[9]  J. Franzke,et al.  Diagnostics of low pressure microplasmas for surface modification , 2011 .

[10]  F. Reniers,et al.  XPS and contact angle study of N2 and O2 plasma‐modified PTFE, PVDF and PVF surfaces , 2006 .

[11]  K. Ho,et al.  Elucidation of electrochemical properties of electrolyte-impregnated micro-porous ceramic films as f , 2011 .

[12]  Polycarpos Falaras,et al.  Sensitization of TiO2 by Polypyridine Dyes Role of the Electron Donor , 2003 .

[13]  Fuyou Li,et al.  A quasi-solid-state dye-sensitized solar cell based on porous polymer electrolyte membrane , 2008 .

[14]  Wencai Wang,et al.  Functional membranes prepared by layer‐by‐layer assembly and its metal ions adsorption property , 2011 .

[15]  M. Kotaki,et al.  Surface modified nonwoven polysulphone (PSU) fiber mesh by electrospinning : a novel affinity membrane , 2006 .

[16]  K. Ho,et al.  Favorable effects of titanium nitride or its thermally treated version in a gel electrolyte for a quasi-solid-state dye-sensitized solar cell , 2011 .

[17]  Shih-Hsien Yang,et al.  Low-Temperature Atmospheric-Pressure-Plasma Jet for Thin-Film Deposition , 2009, IEEE Transactions on Plasma Science.

[18]  C. Luo,et al.  Multi-step hydrothermally synthesized TiO2 nanoforests and its application to dye-sensitized solar cells , 2012 .

[19]  Alagesan Subramanian,et al.  Effect of hydroxyl group attachment on TiO2 films for dye-sensitized solar cells , 2012 .

[20]  Y. Duan,et al.  Low-temperature direct current glow discharges at atmospheric pressure , 2005 .

[21]  Ashraful Islam,et al.  Dye-Sensitized Solar Cells with Conversion Efficiency of 11.1% , 2006 .

[22]  S. I. Rokhlin,et al.  Wettability modification of electrospun poly(ɛ-caprolactone) fibers by femtosecond laser irradiation in different gas atmospheres , 2011 .

[23]  Chun Huang,et al.  Contact angle analysis of low-temperature cyclonic atmospheric pressure plasma modified polyethylene terephthalate , 2010 .

[24]  Ho-Suk Choi,et al.  Amphiphobicity of polyvinylidene fluoride porous films after atmospheric pressure plasma intermittent etching , 2011 .

[25]  H. Erli,et al.  Surface modification of poly(vinylidenefluoride) to improve the osteoblast adhesion. , 2003, Biomaterials.

[26]  K. Neoh,et al.  Antibacterial activities of surface modified electrospun poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) fibrous membranes , 2009 .

[27]  Jianhua Cao,et al.  Preparation and characterization of PVDF–HFP microporous flat membranes by supercritical CO2 induced phase separation , 2005 .

[28]  Songting Tan,et al.  Low-cost quasi-solid-state dye-sensitized solar cells based on a metal-free organic dye and a carbon aerogel counter electrode , 2011 .

[29]  Yuan Wang,et al.  Enhance the optical absorptivity of nanocrystalline TiO2 film with high molar extinction coefficient ruthenium sensitizers for high performance dye-sensitized solar cells. , 2008, Journal of the American Chemical Society.

[30]  D. K. Owens,et al.  Estimation of the surface free energy of polymers , 1969 .

[31]  Xiangming He,et al.  Preparation of PVDF¿HFP microporous membrane for Li-ion batteries by phase inversion , 2006 .

[32]  C. Wan,et al.  Preparation of porous, chemically cross-linked, PVdF-based gel polymer electrolytes for rechargeable lithium batteries , 2004 .

[33]  Application of Pt sputter-deposited counter electrodes based on micro-patterned ITO glass to quasi-solid state dye-sensitized solar cells , 2012 .

[34]  Jost Degenhardt,et al.  Plasma jet treatment of five polymers at atmospheric pressure: surface modifications and the relevance for adhesion , 2004 .