Multi-axis force sensing using a resonant composite piezoelectric plate: model and experiments

Wrist force/torque sensors used in robotic applications increase the performances and flexibility of the automated tasks. They also offer new possibilities in the manufacturing process, where physical contact between the work-piece and environment is required. The wide spreading of these sensors is for now restricted by their features. As an alternative to the existing strain-gauges force sensors, this paper presents a resonant composite structure, which is sensitive to multiple components of force that are considered via the pre-stress effect. Structurally bonded piezoelectric patches are used to bring the structure to its resonance, which is shifted according to applied forces. The relationship between force and frequency shift is modelled considering the multi-physics of this smart structure. This model is built using Hamiltonʼs principle and takes into account pre-stress phenomena. A finite element model (FEM) based on Mindlin theory for plates, has been derived from the analytical model. The FEM model is implemented in MATLAB and compared with commercial FE software. Finally, an experimental prototype validates the model, and shows that it is possible to measure multiple force-components with one single sensing element such as a plate.

[1]  M. Géradin,et al.  Mechanical Vibrations: Theory and Application to Structural Dynamics , 1994 .

[2]  Hongguang Wang,et al.  Performance Analysis and Optimization of Sizable 6-axis Force Sensor Based on Stewart Platform , 2007, 2007 International Conference on Mechatronics and Automation.

[3]  Yasunaga Mitsuya,et al.  Monolithically fabricated double-ended tuning-fork-based force sensor , 2006 .

[4]  R. M. Langdon,et al.  Resonator sensors-a review , 1985 .

[5]  Barry E. Jones,et al.  Design and performance characteristics of an integrated high-capacity DETF-based force sensor , 1996 .

[6]  S. Büttgenbach,et al.  Triple-beam resonant silicon force sensor based on piezoelectric thin films , 1994 .

[7]  Etienne Burdet,et al.  Design of a simple MRI/fMRI compatible force/torque sensor , 2004, 2004 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (IEEE Cat. No.04CH37566).

[8]  Claudine Gehin,et al.  Resonant force sensor using a PLL electronic , 2003 .

[9]  H. Tiersten.  Hamilton's principle for linear piezoelectric media , 1967 .

[10]  Denis Desmaële,et al.  A Planar Resonant Structure Sensitive to Out-of-plane Forces , 2011 .

[11]  F. Sinden,et al.  A planar capacitive force sensor with six degrees of freedom , 1986, Proceedings. 1986 IEEE International Conference on Robotics and Automation.

[12]  Jun Wu,et al.  Toward Force-Based Signature Verification: A Pen-Type Sensor and Preliminary Validation , 2010, IEEE Transactions on Instrumentation and Measurement.

[13]  Guillaume Morel,et al.  Human force amplification with industrial robot : Study of dynamic limitations , 2010, 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[14]  E. Benes,et al.  Sensors based on piezoelectric resonators , 1995 .

[15]  Masaru Uchiyama,et al.  A Systematic Design Procedure to Minimize a Performance Index for Robot Force Sensors , 1991 .

[16]  Ralph C. Smith,et al.  Smart material systems - model development , 2005, Frontiers in applied mathematics.

[17]  Shun-Qi Zhang,et al.  Large rotation FE transient analysis of piezolaminated thin-walled smart structures , 2013 .

[18]  U Ashwin,et al.  Formulation of 36-noded piezoelectric spectral finite element scheme with active/passive layers coupled by Lagrange multipliers , 2014 .

[19]  W.J. Fleming,et al.  Automotive torque measurement: A summary of seven different methods , 1982, IEEE Transactions on Vehicular Technology.

[20]  André Preumont,et al.  Vibration Control of Active Structures: An Introduction , 2018 .

[21]  Shun-Qi Zhang,et al.  Static and dynamic FE analysis of piezoelectric integrated thin-walled composite structures with large rotations , 2014 .

[22]  Dan Mihai Ştefănescu,et al.  Handbook of Force Transducers , 2011 .

[23]  Martin Buehler,et al.  Design of a Hollow Hexaform Torque Sensor for Robot Joints , 2001, Int. J. Robotics Res..