Application of Genetic Algorithm to the Design Optimization of Complex Energy Saving Glass Coating Structure

Attenuation of GSM, GPS and personal communication signal leads to poor communication inside the building using regular shapes of energy saving glass coating. Thus, the transmission is very low. A brand new type of band pass frequency selective surface (FSS) for energy saving glass application is presented in this paper for one unit cell. Numerical Periodic Method of Moment approach according to a previous study has been applied to determine the new optimum design of one unit cell energy saving glass coating structure. Optimization technique based on the Genetic Algorithm (GA) is used to obtain an improved in return loss and transmission signal. The unit cell of FSS is designed and simulated using the CST Microwave Studio software at based on industrial, scientific and medical bands (ISM). A unique and irregular shape of an energy saving glass coating structure is obtained with lower return loss and improved transmission coefficient.

[1]  J. M. Johnson,et al.  Genetic algorithms in electromagnetics , 1996, IEEE Antennas and Propagation Society International Symposium. 1996 Digest.

[2]  Anders Karlsson,et al.  Transmission of infrared and visible wavelengths through energy-saving glass due to etching of frequency-selective surfaces , 2010 .

[3]  Sam Kwong,et al.  Genetic algorithms: concepts and applications [in engineering design] , 1996, IEEE Trans. Ind. Electron..

[4]  Randy L. Haupt,et al.  Practical Genetic Algorithms , 1998 .

[5]  Pengfei Guo,et al.  The enhanced genetic algorithms for the optimization design , 2010, 2010 3rd International Conference on Biomedical Engineering and Informatics.

[6]  R. Langley,et al.  Frequency selective surfaces on biased ferrite substrates , 1994 .

[7]  Ben A. Munk,et al.  Frequency Selective Surfaces: Theory and Design , 2000 .

[8]  Hang Tuah Jaya.  PHASE SHIFT OF THE TRANSMISSION COEFFICIENTS FOR FREQUENCY SELECTIVE SURFACES , 2013 .

[9]  David E. Goldberg,et al.  Genetic Algorithms, Tournament Selection, and the Effects of Noise , 1995, Complex Syst..

[10]  Rakesh Kumar,et al.  Blending Roulette Wheel Selection & Rank Selection in Genetic Algorithms , 2012 .

[11]  William M. Spears,et al.  A Study of Crossover Operators in Genetic Programming , 1991, ISMIS.

[12]  Daryoush Habibi,et al.  Design of RF/Microwave efficient buildings using frequency selective surface , 2011, 2011 IEEE 22nd International Symposium on Personal, Indoor and Mobile Radio Communications.

[13]  Mohamad Zoinol Abidin Abdul Aziz,et al.  Impedance modeling for a unit cell of the square loop frequency selective surface at 2.4 GHz , 2013, 2013 IEEE International Conference on RFID-Technologies and Applications (RFID-TA).

[14]  Raj Mittra,et al.  Frequency selective surface design based on genetic algorithm , 1999 .

[15]  Ying Liu,et al.  A novel application of frequency selective surface in dual-band WLAN antenna , 2012, ISAPE2012.

[16]  Ghaffer I. Kiani,et al.  Enhancing RF/microwave efficient transmission through energy saving glass windows using Frequency Selective surface , 2011, 2011 IEEE International Symposium on Antennas and Propagation (APSURSI).

[17]  Application of the Genetic Algorithm to the design optimization of millimeter wave spaceborne frequency selective surface , 2012, ISAPE2012.