Experimental Measurements and Computational Predictions for an Internally Cooled Simulated Turbine Vane With 90 Degree Rib Turbulators

[1]  M. S. Mihelc,et al.  Analytical and Experimental Evaluation of the Heat Transfer Distribution over the Surfaces of Turbine Vanes , 1983 .

[2]  D. Wilcox.  Multiscale model for turbulent flows , 1986 .

[3]  Karsten Kusterer,et al.  3-D Internal Flow and Conjugate Calculations of a Convective Cooled Turbine Blade With Serpentine-Shaped and Ribbed Channels , 1999 .

[4]  Patrick C. Sweeney,et al.  An infrared technique for evaluating turbine airfoil cooling designs , 2000 .

[5]  Phil Ligrani,et al.  Comparison of Heat Transfer Augmentation Techniques , 2003 .

[6]  James H. Leylek,et al.  Three-Dimensional Conjugate Heat Transfer Simulation of an Internally-Cooled Gas Turbine Vane , 2003 .

[7]  Bruno Facchini,et al.  Conjugate Heat Transfer Simulation of a Radially Cooled Gas Turbine Vane , 2004 .

[8]  R. Fedrizzi,et al.  Investigation of the Conjugate Convective-Conductive Thermal Behavior of a Rib-Roughened Internal Cooling Channel , 2004 .

[9]  Jason E. Albert,et al.  Adiabatic and Overall Effectiveness for a Film Cooled Blade , 2004 .

[10]  Francesco Agostini,et al.  Conjugate Heat Transfer Investigation of Rib-Roughened Cooling Channels , 2005 .

[11]  Jason E. Albert,et al.  Net Heat Flux Reduction and Overall Effectiveness for a Turbine Blade Leading Edge , 2005 .

[12]  Je-Chin Han,et al.  Turbine Blade Internal Cooling Passages with Rib Turbulators , 2006 .

[13]  Jiang Luo,et al.  Conjugate heat transfer analysis of a cooled turbine vane using the V2F turbulence model , 2007 .

[14]  P. Lettieri,et al.  An introduction to heat transfer , 2007 .

[15]  Gregory M. Laskowski,et al.  Turbulence Model Assessment for Conjugate Heat Transfer in a High Pressure Turbine Vane Model , 2008 .

[16]  Jason E. Dees,et al.  Experimental Measurements and Computational Predictions for an Internally Cooled Simulated Turbine Vane , 2012 .