Enhanced Dimensional Stability of Rigid PVC Foams Using Glass Fibers

Authors : Nidal H. Abu-Zahra, Murtatha M. Jamel, Parisa Khoshnoud, Subhashini Gunashekar Abstract : Two types of glass fibers having different lengths (1/16" and 1/32") were added into rigid PVC foams to enhance the dimensional stability of extruded rigid Polyvinyl Chloride (PVC) foam at different concentrations (0-20 phr) using a single screw profile extruder. PVC foam-glass fiber composites (PVC-GF) were characterized for their dimensional stability, structural, thermal, and mechanical properties. Experimental results show that the dimensional stability, heat resistance, and storage modulus were enhanced without compromising the tensile and flexural strengths of the composites. Overall, foam composites which were prepared with longer glass fibers exhibit better mechanical and thermal properties than those prepared with shorter glass fibers due to higher interlocking between the fibers and the foam cells, which result in better load distribution in the matrix.

[1]  Leonie Moench,et al.  Introduction To Polymers , 2016 .

[2]  G. Deák,et al.  Preparation and characterization of poly(vinyl chloride)–continuous carbon fiber composites , 2012 .

[3]  R. Yahya,et al.  Extrusion and injection-molding of glass fiber/MAPP/polypropylene: effect of coupling agent on DSC, DMA, and mechanical properties , 2011 .

[4]  S. Nemat-Nasser,et al.  Dynamic Mechanical Analysis of Fly Ash Filled Polyurea Elastomer , 2011 .

[5]  W. Kim,et al.  Effects of fiber characteristics on the mechanical and rheological properties of poly(butylene terephthalate)/glass fiber composites , 2010 .

[6]  J. Thomason.  The influence of fibre length, diameter and concentration on the impact performance of long glass-fibre reinforced polyamide 6,6 , 2009 .

[7]  N. Sombatsompop,et al.  Mechanical Characterization of E-Chopped Strand Glass Fiber Reinforced Wood/PVC Composites , 2007 .

[8]  E. Bayramlı,et al.  Short glass fiber reinforced ABS and ABS/PA6 composites: Processing and characterization , 2005 .

[9]  Haihong Jiang,et al.  Development of poly(vinyl chloride)/wood composites. A literature review , 2004 .

[10]  Haihong Jiang,et al.  Mechanical properties of poly(vinyl chloride)/wood flour/glass fiber hybrid composites , 2003 .

[11]  F. Mengeloglu,et al.  Mechanical properties of extrusion‐foamed rigid PVC/wood‐flour composites , 2003 .

[12]  Chul B. Park,et al.  Cell morphology and property relationships of microcellular foamed pvc/wood‐fiber composites , 1998 .

[13]  B. Kokta,et al.  A comparative study on the effect of aging on mechanical properties of LLDPE- glass fiber, mica, and wood fiber composites , 1990 .

[14]  James L White.  Principles of polymer engineering rheology , 1990 .