Matching Technique for an On-Body Low-Profile Coupled-Patches UHF RFID Tag and for Sensor Antennas

This paper introduces a novel impedance matching technique for extremely low-profile on-body UHF RFID tag antennas based on coupled shorted-patch antennas. The approach employs a novel arrangement of comb-notches perpendicular to the central radiation slot that excites the close higher order mode that affects the field distribution of the fundamental mode and sets the input impedance to the required complex values of UHF RFID chips over the range of 5-50 Ω for the real part and 100-200 Ω for the imaginary part, or directly to 50 Ω impedance. A set of parametric studies shows the flexibility of the proposed technique for achieving complex input impedances. To verify the proposed technique, we have developed and measured two antenna samples of relative size 0.3 × 0.17 × 0.0022λ0. A first antenna is matched to 50 Ω, and is intended to be used as an on-body antenna sensor for mapping the received signal strength in applications of the European UHF RFID band. The second antenna operates as an RFID tag antenna with input impedance in Zin = 22 + j195 Ω, and reaches a read range of 7.3 m.

[1]  Xianming Qing,et al.  Impedance Characterization of RFID Tag Antennas and Application in Tag Co-Design , 2009, IEEE Transactions on Microwave Theory and Techniques.

[2]  Pekka Pursula,et al.  Planar inverted-F antenna for radio frequency identification , 2004 .

[3]  P.S. Hall,et al.  Antennas and propagation for body centric wireless communications , 2012, IEEE/ACES International Conference on Wireless Communications and Applied Computational Electromagnetics, 2005..

[4]  Milan Polivka,et al.  Impedance Properties and Radiation Efficiency of Electrically Small Double and Triple Split-Ring Antennas for UHF RFID Applications , 2013, IEEE Antennas and Wireless Propagation Letters.

[5]  H. Oraizi,et al.  Novel F-Shaped Quad-Band Printed Slot Antenna for WLAN and WiMAX MIMO Systems , 2013, IEEE Antennas and Wireless Propagation Letters.

[6]  P. Hudec,et al.  UHF RF Identification of People in Indoor and Open Areas , 2009, IEEE Transactions on Microwave Theory and Techniques.

[7]  G. Marrocco.  RFID Antennas for the UHF Remote Monitoring of Human Subjects , 2007, IEEE Transactions on Antennas and Propagation.

[8]  John C. Batchelor,et al.  Antennas and Propagation for Body-Centric Wireless Communications , 2012 .

[9]  Kai Fong Lee,et al.  Advances in microstrip and printed antennas , 1997 .

[10]  Milan Svanda,et al.  Two novel extremely low‐profile slot‐coupled two‐element patch antennas for UHF RFID of people , 2010 .

[11]  Milan Svanda,et al.  Horizontal five‐arm folded dipole over metal screening plane for UHF RFID of dielectric objects , 2010 .

[12]  Shih-Kang Kuo,et al.  An Analytic Model for Impedance Calculation of an RFID Metal Tag , 2010, IEEE Antennas and Wireless Propagation Letters.

[13]  M. S. Sharawi,et al.  An 8-Element Printed V-Shaped Circular Antenna Array for Power-Based Vehicular Localization , 2012, IEEE Antennas and Wireless Propagation Letters.

[14]  Gaetano Marrocco,et al.  Modeling, Design and Experimentation of Wearable RFID Sensor Tag , 2010, IEEE Transactions on Antennas and Propagation.

[15]  Premysl Hudec,et al.  Novel low‐profile foam dielectric over‐the‐shoulder antenna based on coupled patches technique , 2013 .

[16]  Gaetano Marrocco,et al.  Miniaturised wearable UHF-RFID tag with tuning capability , 2012 .

[17]  John C. Batchelor,et al.  Covert dual-band wearable button antenna , 2006 .

[18]  C. Medeiros,et al.  Evaluation of a New Wideband Slot Array for MIMO Performance Enhancement in Indoor WLANs , 2011, IEEE Transactions on Antennas and Propagation.

[19]  Terry Tao Ye,et al.  Compact Metallic RFID Tag Antennas With a Loop-Fed Method , 2011, IEEE Transactions on Antennas and Propagation.

[20]  K. Nishikawa,et al.  Compact Planar Four-Sector Antenna Comprising Microstrip Yagi-Uda Arrays in a Square Configuration , 2008, IEEE Antennas and Wireless Propagation Letters.