Manufacturing and design of the offshore structure Froude scale model related to basin restrictions

Manufacturing steps for a modern three - column semi-submersible structure are delivered using CFD/CAE software and actual Froude scaled model testing. The three- column offshore is part of the Wind Float Project already realized as prototype for wind energy extraction in water depths more than 40 meters, and the actual model will not consider the wind turbine. The model will have heave plates for a smaller heave motion in order to compare it with the case without heave plates. The heave plates will be part of the Froude scale model.. Using a smaller model will determine a smaller heave motion and this will affect predictions of the vertical movement of the three- column offshore structure in real sea. The Froude criterion is used for the time, speed and acceleration scale. The scale model is manufactured from steel and fiberglass and all parts are subjected to software analysis in order to get the smallest stress in connections inside the model. The model mass was restricted by scale dimensions and also the vertical position of centre gravity will be considered during the manufacturing and design process of the Froude scale offshore structure. All conditions must converge in model manufacturing and design in order to get the best results to compare with real sea states and heave motion data.