Effective mechanical properties of unidirectional composites in the presence of imperfect interface

[1]  U. Gabbert,et al.  Numerical study of effective elastic properties of fiber reinforced composites with rhombic cell arrangements and imperfect interface , 2013 .

[2]  I. Sevostianov,et al.  Connections between different models describing imperfect interfaces in periodic fiber-reinforced composites , 2012 .

[3]  U. Gabbert,et al.  Numerical and Analytical Approaches for Calculating the Effective Thermo-Mechanical Properties of Three-Phase Composites , 2007 .

[4]  Jacob Fish,et al.  Eigendeformation-based reduced order homogenization for failure analysis of heterogeneous materials , 2007 .

[5]  Jacqueline J. Li,et al.  Homogenization of a fibre/sphere with an inhomogeneous interphase for the effective elastic moduli of composites , 2005, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[6]  H. Shodja,et al.  Overall behavior of composites with periodic multi-inhomogeneities , 2005 .

[7]  Yi Liu,et al.  On the accuracy of the self-consistent approximation for polycrystals: comparison with full-field numerical simulations , 2004 .

[8]  Julián Bravo-Castillero,et al.  Closed-form expressions for the effective coefficients of fibre-reinforced composite with transversely isotropic constituents. I: Elastic and hexagonal symmetry , 2001 .

[9]  Peter Wriggers,et al.  Computational micro-macro material testing , 2001 .

[10]  Peter Wriggers,et al.  Aspects of the computational testing of the mechanical properties of microheterogeneous material samples , 2001 .

[11]  Marcin Kamiński,et al.  Boundary element method homogenization of the periodic linear elastic fiber composites , 1999 .

[12]  J. Qu,et al.  Damage initiation under transverse loading of unidirectional composites with arbitrarily distributed fibers , 1999 .

[13]  Peter Wriggers,et al.  A computational study of interfacial debonding damage in fibrous composite materials , 1998 .

[14]  M. Cherkaoui,et al.  The overall elastic response of materials containing coated inclusions in a periodic array , 1998 .

[15]  M. Dunn,et al.  Elastic Moduli of Composites Reinforced by Multiphase Particles , 1995 .

[16]  S. Hazanov,et al.  On overall properties of elastic heterogeneous bodies smaller than the representative volume , 1995 .

[17]  M. H. Geier,et al.  Quality Handbook for Composite Materials , 1994 .

[18]  K. Drechsler.  M. H. Geier. Quality handbook for composite materials. 1. Auflage, Chapman + Hull, London, 1994, 278 Seiten , 1994 .

[19]  Sia Nemat-Nasser,et al.  Double-inclusion model and overall moduli of multi-phase composites , 1994 .

[20]  Ramesh Talreja,et al.  Effects of nonuniformity of fiber distribution on thermally-induced residual stresses and cracking in ceramic matrix composites , 1993 .

[21]  S. Nemat-Nasser,et al.  Micromechanics: Overall Properties of Heterogeneous Materials , 1993 .

[22]  Zafer Gürdal,et al.  Effects of processing induced defects on laminate response - Interlaminar tensile strength , 1991 .

[23]  G. Weng,et al.  Elastic moduli of thickly coated particle and fiber-reinforced composites , 1991 .

[24]  Zvi Hashin,et al.  Thermoelastic properties of fiber composites with imperfect interface , 1990 .

[25]  Pericles S. Theocaris,et al.  The Mesophase Concept in Composites , 1987 .

[26]  Z. Hashin.  Analysis of Composite Materials—A Survey , 1983 .

[27]  Sia Nemat-Nasser,et al.  On composites with periodic structure , 1982 .

[28]  M. Taya,et al.  On effective moduli of an elastic body containing periodically distributed voids , 1981 .

[29]  Ravi Prakash,et al.  Significance of defects in the fatigue failure of carbon fibre reinforced plastics , 1981 .

[30]  Rodney Hill,et al.  Theory of mechanical properties of fibre-strengthened materials—III. self-consistent model , 1965 .

[31]  Rodney Hill,et al.  Theory of mechanical properties of fibre-strengthened materials: I. Elastic behaviour , 1964 .

[32]  K. Hackl,et al.  APPLICATION OF THE MULTISCALE FEM TO THE MODELING OF NONLINEAR COMPOSITES WITH A RANDOM MICROSTRUCTURE , 2012 .

[33]  Huiling Duan,et al.  A unified scheme for prediction of effective moduli of multiphase composites with interface effects: Part II—Application and scaling laws , 2007 .

[34]  Jörg Schröder,et al.  Homogenisierungsmethoden der nichtlinearen Kontinuumsmechanik unter Beachtung von Stabilitätsproblemen , 2000 .

[35]  Jan-Anders E. Månson,et al.  2.16 – Composite Processing and Manufacturing—An Overview , 2000 .

[36]  John Summerscales,et al.  Manufacturing defects in fibre-reinforced plastics composites , 1994 .

[37]  Zvi Hashin,et al.  Thermoelastic properties of particulate composites with imperfect interface , 1991 .

[38]  Richard M. Christensen,et al.  A critical evaluation for a class of micro-mechanics models , 1990 .

[39]  S. Kanaun,et al.  Elastic and thermoelastic characteristics of composites reinforced with unidirectional fibre layers , 1989 .

[40]  Bernard Miller,et al.  A microbond method for determination of the shear strength of a fiber/resin interface , 1987 .

[41]  S. Kanaun,et al.  Spherically layered inclusions in a homogeneous elastic medium , 1986 .

[42]  T. Iwakuma,et al.  Composites with periodic microstructure , 1983 .

[43]  Toshio Mura,et al.  Micromechanics of defects in solids , 1982 .