RELIABILITY CHALLENGES IN AIRSIDE ECONOMIZATION AND OIL IMMERSION COOLING

The energy used by information technology (IT) equipment and the supporting data center equipment keeps rising as data center proliferation continues unabated. In order to contain the rising computing costs, data center administrators are resorting to cost cutting measures such as not tightly controlling the temperature and humidity levels and in many cases installing air side economizers with the associated risk of introducing particulate and gaseous contaminations into their data centers. The ASHRAE TC9.9 subcommittee, on Mission Critical Facilities, Data Centers, Technology Spaces, and Electronic Equipment, has accommodated the data center administrators by allowing short period excursions outside the recommended temperature-humidity range, into allowable classes A1-A3. Under worst case conditions, the ASHRAE A3 envelope allows electronic equipment to operate at temperature and humidity as high as 24oC and 85% relative humidity for short, but undefined periods of time. This paper addresses the IT equipment reliability issues arising from operation in high humidity and high temperature conditions, with particular attention paid to the question of whether it is possible to determine the allencompassing x-factors that can capture the effects of temperature and relative humidity on equipment reliability. The role of particulate and gaseous contamination and the aggravating effects of high temperature and high relative humidity will be presented and discussed. A method to determine the temperature and humidity x-factors, based on testing in experimental data centers located in polluted geographies, will be proposed.

[1]  Jing Zhang,et al.  Testing Printed Circuit Boards for Creep Corrosion in Flowers of Sulfur Chamber , 2014 .

[2]  Dereje Agonafer,et al.  Effects of mineral oil immersion cooling on IT equipment reliability and reliability enhancements to data center operations , 2016, 2016 15th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm).

[3]  Edward L. King,et al.  Basic chemical kinetics , 1987 .

[4]  Dereje Agonafer,et al.  Flow Rate and inlet temperature considerations for direct immersion of a single server in mineral oil , 2014, Fourteenth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm).

[5]  F. M. Clark,et al.  Dielectric strength of mineral oils , 1935, Electrical Engineering.

[6]  Hendrik F. Hamann,et al.  Humidity Control and Dew Point Management , 2011 .

[7]  Haley Fu,et al.  INVESTIGATION OF FACTORS THAT INFLUENCE CREEP CORROSION ON PRINTED CIRCUIT BOARDS , 2012 .

[8]  W. J. Ready,et al.  A novel test circuit for automatically detecting electrochemical migration and conductive anodic filament formation , 1999 .

[9]  A J Gadgil,et al.  Hygroscopic fine mode particle deposition on electronic circuits and resulting degradation of circuit performance: an experimental study. , 2000, Indoor air.

[10]  James R. Lloyd,et al.  Electromigration in integrated circuit conductors , 1999 .

[11]  Richard Mark Eiland,et al.  Thermo-mechanical Design Considerations At The Server And Rack Levels To Achieve Maximum Data Center Energy Efficiency , 2015 .

[12]  Chetan S. Kulkarni,et al.  Physics Based Electrolytic Capacitor Degradation Models for Prognostic Studies under Thermal Overstress , 2012 .

[13]  E. Yuliastuti.  Analysis of Dielectric Properties Comparison between Mineral Oil and Synthetic Ester Oil , 2010 .

[14]  R. P. Frankenthal,et al.  Corrosion of Electronic Materials and Devices , 1986, Science.

[15]  D. W. Rice,et al.  Atmospheric Corrosion of Copper and Silver , 1981 .

[16]  P. Ruch,et al.  Characterization, Prevention and Removal of Particulate Matter on Printed Circuit Boards , 2015 .

[17]  Levente J. Klein,et al.  Effect of Relative Humidity, Temperature and Gaseous and Particulate Contaminations on Information Technology Equipment Reliability , 2015 .