The Development of a New Piezoresistive Pressure Sensor for Low Pressures

This paper presents the design methodology and fabrication process of a novel piezoresistive pressure sensor with a combined cross-beam membrane and peninsula (CBMP) diaphragm structure for micropressure measurements. The sensor is then analyzed through various experiments. The sensor is primarily designed based on the optimized sensitivity, and a finite-element method is used to predict the stresses that are induced in the piezoresistors and the deflection of the membrane under different pressures. Compared to other traditional diaphragm types, a significant increase in sensitivity can be achieved by the proposed sensor, and the membrane deflection and nonlinearity error considerably decrease. The sensor fabrication process is performed on an n-type single-crystal silicon wafer, and photolithography is used with five masks to fabricate the sensing elements. Additionally, piezoresistors are formed by boron implantation. The experimental results indicate that the fabricated sensor with the CBMP membrane yields a high sensitivity of 25.7 mV/kPa and a low nonlinearity of −0.28% full-scale span for a pressure range of 0–5 kPa at room temperature.

[1]  H. Sandmaier,et al.  A square-diaphragm piezoresistive pressure sensor with a rectangular central boss for low-pressure ranges , 1993 .

[2]  Robert Neal Dean,et al.  Applications of Microelectromechanical Systems in Industrial Processes and Services , 2009, IEEE Transactions on Industrial Electronics.

[3]  Matthias Durr,et al.  Analysis And Design Principles Of Mems Devices , 2016 .

[4]  Yulong Zhao,et al.  The novel structural design for pressure sensors , 2010 .

[5]  D. Kwong,et al.  Optimization of NEMS pressure sensors with a multilayered diaphragm using silicon nanowires as piezoresistive sensing elements , 2012 .

[6]  James H. Smith,et al.  Micromachined pressure sensors: review and recent developments , 1997, Smart Structures.

[7]  C. Hierold,et al.  Fabrication of single-walled carbon-nanotube-based pressure sensors. , 2006, Nano letters.

[8]  Fu-Kuo Chang,et al.  Stand-Alone Stretchable Absolute Pressure Sensing System for Industrial Applications , 2017, IEEE Transactions on Industrial Electronics.

[9]  Hiranmay Saha,et al.  Temperature compensation of piezoresistive micro-machined porous silicon pressure sensor by ANN , 2006, Microelectron. Reliab..

[10]  Yulong Zhao,et al.  The Design and Optimization of a Highly Sensitive and Overload-Resistant Piezoresistive Pressure Sensor , 2016, Sensors.

[11]  Tao Chen,et al.  Design and Fabrication of a Four-Arm-Structure MEMS Gripper , 2009, IEEE Transactions on Industrial Electronics.

[12]  Fang Yang,et al.  The Design and Analysis of Piezoresistive Shuriken-Structured Diaphragm Micro-Pressure Sensors , 2017, Journal of Microelectromechanical Systems.

[13]  Zhuangde Jiang,et al.  Incorporation of beams into bossed diaphragm for a high sensitivity and overload micro pressure sensor. , 2013, The Review of scientific instruments.

[14]  R. Dauskardt,et al.  An ultra-sensitive resistive pressure sensor based on hollow-sphere microstructure induced elasticity in conducting polymer film , 2014, Nature Communications.

[15]  P. Yang,et al.  Giant piezoresistance effect in silicon nanowires , 2006, Nature nanotechnology.

[16]  Yan Liu,et al.  Realization of a micro pressure sensor with high sensitivity and overload by introducing beams and Islands , 2015 .

[17]  Zhuangde Jiang,et al.  The design and analysis of beam-membrane structure sensors for micro-pressure measurement. , 2012, The Review of scientific instruments.

[18]  José Luis Ocaña,et al.  The design and analysis of a novel structural piezoresistive pressure sensor for low pressure measurement , 2017 .

[19]  A digital compensation method for piezoresistive pressure sensor , 2016, 2016 Progress in Electromagnetic Research Symposium (PIERS).

[20]  Min Li,et al.  Design Optimization and Fabrication of High-Sensitivity SOI Pressure Sensors with High Signal-to-Noise Ratios Based on Silicon Nanowire Piezoresistors , 2016, Micromachines.

[21]  W. J. Fleming,et al.  Overview of automotive sensors , 2001 .

[22]  Xian Huang,et al.  A high sensitivity and high linearity pressure sensor based on a peninsula-structured diaphragm for low-pressure ranges , 2014 .

[23]  B. D. Pant,et al.  Design principles and considerations for the ‘ideal’ silicon piezoresistive pressure sensor: a focused review , 2014, Microsystem Technologies.

[24]  Farid Bakir,et al.  Experimental investigations on the wall pressure measurement on the blade of axial flow fans , 2012 .

[25]  Liwei Lin,et al.  Design, optimization and fabrication of surface micromachined pressure sensors , 1998 .

[26]  Xianmin Zhang,et al.  Design of diaphragm structure for piezoresistive pressure sensor using topology optimization , 2017 .

[27]  Denis Donlagic,et al.  Miniature fiber optic pressure sensor for medical applications , 2002, Proceedings of IEEE Sensors.

[28]  Shuang Chen,et al.  Design and optimization of a micro piezoresistive pressure sensor , 2008, 2008 3rd IEEE International Conference on Nano/Micro Engineered and Molecular Systems.

[29]  Ha-Duong Ngo,et al.  Design and simulation of ultra high sensitive piezoresistive MEMS sensor with structured membrane for low pressure applications , 2010, 2010 12th Electronics Packaging Technology Conference.

[30]  Hiranmay Saha,et al.  Modeling, simulation and temperature compensation of porous polysilicon capacitive humidity sensor using ANN technique , 2005, Microelectron. Reliab..

[31]  Zhuangde Jiang,et al.  A high sensitive pressure sensor with the novel bossed diaphragm combined with peninsula-island structure , 2016 .