On optimizing maximum‐power heat engines

For a general class of heat engines operating at maximum power, in which the generic sources of irreversibility are finite‐rate heat transfer and friction only, we investigate (1) the time‐dependent driving functions that maximize power when heat input and heat rejection are constrained to be nonisothermal, as is the case in many conventional heat engines, and (2) the specific impact of friction on the nature of the engine cycle that maximizes power, and on the engine’s power‐efficiency characteristic. The extent to which maximum power is affected by the constraints on the driving function is evaluated, as well as the time divisions on the different branches of the optimal cycle. The fundamental differences in engine performance that arise from frictional losses being internally dissipative, as opposed to externally dissipative, are derived, and illustrative examples are presented.

[1]  M. Rubin.  Optimal configuration of a class of irreversible heat engines. II , 1979 .

[2]  Yehuda B. Band,et al.  The generalized Carnot cycle: A working fluid operating in finite time between finite heat sources and sinks , 1983 .

[3]  Peter Salamon,et al.  Optimal heating of the working fluid in a cylinder equipped with a moving piston , 1981 .

[4]  Harvey S. Leff,et al.  Thermal efficiency at maximum work output: New results for old heat engines , 1987 .

[5]  B. Andresen,et al.  Thermodynamics in finite time: extremals for imperfect heat engines , 1977 .

[6]  Peter Salamon,et al.  Maximum power from a cycling working fluid , 1982 .

[7]  J. M. Gordon,et al.  Maximum power point characteristics of heat engines as a general thermodynamic problem , 1989 .

[8]  Peter Salamon,et al.  Finite time optimizations of a Newton’s law Carnot cycle , 1981 .

[9]  Bjarne Andresen,et al.  Maximum work from a finite reservoir by sequential Carnot cycles , 1981 .

[10]  Karl Heinz Hoffmann,et al.  Optimal paths for thermodynamic systems: The ideal diesel cycle , 1982 .

[11]  F. Curzon,et al.  Efficiency of a Carnot engine at maximum power output , 1975 .

[12]  Bjarne Andresen,et al.  Thermodynamics for Processes in Finite Time , 1984 .

[13]  A. D. Vos.  Reflections on the power delivered by endoreversible engines , 1987 .

[14]  J. M. Gordon,et al.  Observations on efficiency of heat engines operating at maximum power , 1990 .

[15]  Lixuan Chen,et al.  The effect of heat‐transfer law on performance of a two‐heat‐source endoreversible cycle , 1989 .

[16]  Alexander Graham,et al.  Introduction to Control Theory, Including Optimal Control , 1980 .