Temperature-dependent torque transmissibility characteristic for automotive dry dual clutches

Dry clutches are widely used in automated manual transmissions. In order to obtain “good” clutch engagements a precise torque transmissibility estimation is crucial. In this paper, a temperature-dependent model of the torque transmissibility characteristic for dry dual clutches is proposed. Dynamic models of the clutches thermal evolutions are determined and linked to the characteristics of the mechanical components influencing the torque transmissibility. Numerical simulations obtained by considering a realistic powertrain model with a dry dual clutch transmission and a corresponding multivariable controller, confirm the effectiveness of the proposed model.

[1]  Seibum B. Choi,et al.  Gear shift control of Dual Clutch Transmissions with a torque rate limitation trajectory , 2011, Proceedings of the 2011 American Control Conference.

[2]  Seibum B. Choi,et al.  Real-Time Estimation of Transmitted Torque on Each Clutch for Ground Vehicles With Dual Clutch Transmission , 2015, IEEE/ASME Transactions on Mechatronics.

[3]  Lars Eriksson,et al.  Modeling, Observability, and Estimation of Thermal Effects and Aging on Transmitted Torque in a Heavy Duty Truck With a Dry Clutch , 2015, IEEE/ASME Transactions on Mechatronics.

[4]  Zhiguo Zhao,et al.  Sliding Mode Variable Structure Control and Real-Time Optimization of Dry Dual Clutch Transmission during the Vehicle’s Launch , 2014 .

[5]  Albert Albers,et al.  Fe thermal analysis of a ceramic clutch , 2009 .

[6]  Seibum Choi,et al.  Design of hybrid position/force engagement controller for dry dual clutch transmission without diaphragm spring , 2014, 2014 American Control Conference.

[7]  Soon Keat Tan,et al.  Application of Potential Theory to Steady Flow Past Two Cylinders in Tandem Arrangement , 2014 .

[8]  Giuliana Mattiazzo,et al.  The influence of the push-plate mechanical characteristic on torque transmissibility in diaphragm spring clutches , 2002 .

[9]  V. N. Trana,et al.  Sliding mode control of a dual clutch during launch , 2012 .

[10]  Oday Ibraheem Abdullah,et al.  Finite Element Analysis for Grooved Dry Friction Clutch , 2012 .

[11]  Lars Eriksson,et al.  The Effect of Thermal Expansion in a Dry Clutch on Launch Control , 2013 .

[12]  Yang Li,et al.  Time-varying friction thermal characteristics research on a dry clutch , 2014 .

[13]  F Vasca,et al.  Torque Transmissibility Assessment for Automotive Dry-Clutch Engagement , 2011, IEEE/ASME Transactions on Mechatronics.

[14]  Michel Dambrine,et al.  H∞ gearshift control of a dual clutch based on uncertain TS models , 2013, 2013 American Control Conference.

[15]  Mario Pisaturo,et al.  Improving the Engagement Smoothness Through Multi-Variable Frictional Map in Automated Dry Clutch Control , 2012 .

[16]  Mario Pisaturo,et al.  TEMPERATURE INFLUENCE ON THE ENGAGEMENT UNCERTAINTY IN DRY CLUTCH-AMT , 2012 .

[17]  Pietro Dolcini,et al.  Dry Clutch Control for Automotive Applications , 2010 .

[18]  L. Glielmo,et al.  Gearshift control for automated manual transmissions , 2006, IEEE/ASME Transactions on Mechatronics.

[19]  Francesco Vasca,et al.  THERMAL MODELS FOR FRICTIONAL TORQUE CHARACTERISTIC IN DRY DUAL CLUTCH TRANSMISSIONS , 2014 .

[20]  Adolfo Senatore,et al.  Experimental investigation and neural network prediction of brakes and clutch material frictional behaviour considering the sliding acceleration influence , 2011 .

[21]  Chen Ran.  Control and Simulation of Launch with Two Clutches for Dual Clutch Transmissions , 2010 .

[22]  Abdellatif Khamlichi,et al.  Optimizing the thermal properties of clutch facings , 2003 .

[23]  Yimin Mo,et al.  Study on Heat Fading of Phenolic Resin Friction Material for Micro-automobile Clutch , 2010, 2010 International Conference on Measuring Technology and Mechatronics Automation.

[24]  Jianwu Zhang,et al.  Gearshift control for dry dual-clutch transmissions , 2009 .

[25]  Francesco Vasca,et al.  Software in the loop model and decoupling control for dual clutch automotive transmissions , 2013, 3rd International Conference on Systems and Control.

[26]  Josef Schlattmann,et al.  Effect of Band Contact on the Temperature Distribution for Dry Friction Clutch , 2012 .