Monitoring fatigue cracks of a metal structure using an eddy current sensor

The present paper investigates monitoring of fatigue cracks of a metal structure using an eddy current micro sensor. Fatigue cracks tend to occur at bolt-jointed structures on an aircraft. In order to detect the damage quantitatively, a kind of change-prone micro eddy current sensor is designed and fabricated with flexible printed circuit board (FPCB) technology. A forward semi-analytical model is built by extracting a material’s conductivity as the damage feature parameter, and characteristics analysis is conducted based on the model. The research focuses on setting up and utilizing the eddy current fields to analyze interaction of adjoining coils when the damage occurs, and investigating optimization on the working parameters of the sensor. In the experimental section, several common connection structures are applied to explore the sensor’s monitoring ability both in air and in a corrosive environment. The result shows that the optimal working frequency is about 1 MHz. The eddy current micro sensor is capable of monitoring the crack growth with an accuracy of 1 mm, the average error being 4.6 % compared to fracture analysis. The sensor keeps high resolution of damage in aqueous corrosion. Due to the fretting fatigue, wear appears on the polyimide foil, leading to the decreases of the monitoring signal.

[1]  Zhiwei Zeng,et al.  A GMR-Based Eddy Current System for NDE of Aircraft Structures , 2006, IEEE Transactions on Magnetics.

[2]  Y. Sheiretov,et al.  MWM-Array Sensors for In Situ Monitoring of High-Temperature Components in Power Plants , 2009, IEEE Sensors Journal.

[3]  F. B. Hildebrand.  Advanced Calculus for Applications , 1962 .

[4]  Neil J. Goldfine,et al.  Early detection and monitoring of fatigue in high strength steels with MWM-Arrays , 2005 .

[5]  R. C. Mcmaster.  Nondestructive testing handbook. Volume 1 - Leak testing /2nd edition/ , 1982 .

[6]  Zhiwei Zeng,et al.  Pulsed Eddy-Current Based Giant Magnetoresistive System for the Inspection of Aircraft Structures , 2010, IEEE Transactions on Magnetics.

[7]  Luis S. Rosado,et al.  Advances in NDT and Materials Characterization by Eddy Currents , 2013 .

[8]  Vijayan Sugumaran,et al.  Building knowledge base of urban emergency events based on crowdsourcing of social media , 2016, Concurr. Comput. Pract. Exp..

[9]  Y. Nagaya,et al.  Identification of multiple cracks from eddy-current testing signals with noise sources by image processing and inverse analysis , 2004, IEEE Transactions on Magnetics.

[10]  Jianxun Chen,et al.  Fiber Bragg Grating-Based Performance Monitoring of Piles Fiber in a Geotechnical Centrifugal Model Test , 2014 .

[11]  Krishnan Balasubramaniam,et al.  Structural health monitoring of anisotropic plates using ultrasonic guided wave STMR array patches , 2009 .

[12]  P. Cui,et al.  Monitoring and warning of landslides and debris flows using an optical fiber sensor technology , 2011 .

[13]  Robert A. Smith,et al.  Transient eddy-current NDE for ageing aircraft - Capabilities and limitations. , 2001 .

[14]  Gui Yun Tian,et al.  A system identification based approach for pulsed eddy current non-destructive evaluation , 2007 .

[15]  N. Takeda,et al.  Correlation between mechanical damage behavior and electrical resistance change in CFRP composites as a health monitoring sensor , 2007 .

[16]  D. Eifler,et al.  Characterization of plasticity-induced martensite formation during fatigue of austenitic steel , 1998 .

[17]  Darrell E. Schlicker,et al.  MWM eddy-current arrays for crack initiation and growth monitoring , 2003 .

[18]  John C. Aldrin,et al.  Computational methods in eddy current crack detection at fastener sites in multi-layer structures , 2009 .

[19]  Neil J. Goldfine,et al.  Introduction to the Meandering Winding Magnetometer (MWM) and the grid measurement approach , 1996, Smart Structures.

[20]  Qin Pengbo,et al.  Engineering Application and Analysis of HM109-1 Sealant in Helicopter , 2010 .

[21]  Christophe Reboud,et al.  Recent Advances in Simulation of Eddy Current Testing of Tubes and Experimental Validations , 2007 .

[22]  Keith Worden,et al.  An introduction to structural health monitoring , 2007, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[23]  Rodrigo Salgado,et al.  Measurement of pile load transfer using the Fiber Bragg Grating sensor system , 2004 .

[24]  Yanko Sheiretov,et al.  Development of Meandering Winding Magnetometer (MWM(Registered) Eddy Current Sensors for the Health Monitoring, Modeling and Damage Detection of High Temperature Composite Materials , 2011 .

[25]  T. K. Gangopadhyay,et al.  Fibre Bragg gratings in structural health monitoring—Present status and applications , 2008 .

[26]  Robert A. Smith,et al.  Deep Corrosion and Crack Detection in Aging Aircraft using Transient Eddy-current NDE , 2001 .

[27]  Vijayan Sugumaran,et al.  Participatory sensing-based semantic and spatial analysis of urban emergency events using mobile social media , 2016, EURASIP J. Wirel. Commun. Netw..

[28]  W. J. Zimmer,et al.  Statistical modeling for particle impact noise detection testing , 1991, Annual Reliability and Maintainability Symposium. 1991 Proceedings.

[29]  F. R. Mahamd Adikan,et al.  Fiber Bragg grating based sensing system: Early corrosion detection for structural health monitoring , 2016 .

[30]  J. Dai,et al.  FBG-Based Creep Analysis of GFRP Materials Embedded in Concrete , 2013 .