Experimental Evidence of Micro-EHL Lubrication in Rough Soft Contacts

An experimental investigation of the lubricated steady-sliding contact for elastically soft solids is reported. We show that the anisotropic character of the surface roughness has a strong influence in determining the transition from boundary lubrication, where the normal load is fully supported by the asperity–asperity interactions, to the hydrodynamic regime, where a thin fluid layer completely separates solid surfaces from direct contact. In particular, tests have been carried out using a ball-on-flat test configuration to measure the friction coefficient at the contact between a smooth steel ball and a rough PDMS as a function of the sliding speed. The most noteworthy result is that the presence of roughness anisotropy strongly modifies the classical shape of the Stribeck curve as a consequence of local micro-EHL conditions which occur at the contact interface.

[1]  C J Hooke,et al.  Rapid Calculation of the Pressures and Clearances in Rough, Elastohydrodynamically Lubricated Contacts Under Pure Rolling. Part 2: General Roughness , 2006 .

[2]  C. Hooke,et al.  Surface roughness modification in elastohydrodynamic line contacts operating in the elastic piezoviscous regime , 1998 .

[3]  Duncan Dowson,et al.  Elastohydrodynamic and micro-elastohydrodynamic lubrication , 1995 .

[4]  Giuseppe Carbone,et al.  Origin of the superior adhesive performance of mushroom-shaped microstructured surfaces , 2011 .

[5]  C J Hooke.  Engineering analysis of rough elastohydrodynamically lubricated contacts , 2009 .

[6]  C. Macosko,et al.  Does the Viscosity of Glycerin Fall at High Shear Rates , 1999 .

[7]  Giuseppe Carbone,et al.  Lubrication in soft rough contacts: A novel homogenized approach. Part II - Discussion , 2011 .

[8]  Huajian Gao,et al.  Mechanics of hierarchical adhesion structures of geckos , 2005 .

[9]  B N J Persson,et al.  On the transition from boundary lubrication to hydrodynamic lubrication in soft contacts , 2009, Journal of physics. Condensed matter : an Institute of Physics journal.

[10]  H. Spikes,et al.  Influence of load and elastic properties on the rolling and sliding friction of lubricated compliant contacts , 2010 .

[11]  B N J Persson,et al.  Fluid dynamics at the interface between contacting elastic solids with randomly rough surfaces , 2010, Journal of physics. Condensed matter : an Institute of Physics journal.

[12]  B. Lorenz,et al.  Leak rate of seals: Comparison of theory with experiment , 2009, 0904.2988.

[13]  Richard F. Salant,et al.  A mixed soft elastohydrodynamic lubrication model with interasperity cavitation and surface shear deformation , 2000 .

[14]  P. Comba,et al.  Part I. Theory , 2007 .

[15]  D. Dowson.  Elastohydrodynamic Lubrication in ‘Soft-On-Soft’ Natural Synovial Joints; ‘Hard-On-Soft’ Cushion and ‘Hard-On-Hard’ Metal-On-Metal Total Joint Replacements , 2006 .

[16]  Zhendong Dai,et al.  Progress on gecko-inspired micro/nano-adhesion arrays , 2010 .

[17]  G. Carbone,et al.  Transition from elastohydrodynamic to mixed lubrication in highly loaded squeeze contacts , 2010 .

[18]  J. Vicente,et al.  Soft lubrication of model hydrocolloids , 2006 .

[19]  Jason R. Stokes,et al.  Soft-tribology : Lubrication in a compliant PDMS-PDMS contact , 2007 .

[20]  C J Hooke,et al.  Rapid Calculation of the Pressures and Clearances in Rough, Elastohydrodynamically Lubricated Contacts Under Pure Rolling. Part 1: Low Amplitude, Sinusoidal Roughness , 2006 .

[21]  Giuseppe Carbone,et al.  Lubrication in soft rough contacts: A novel homogenized approach. Part I - Theory , 2011 .

[22]  B. Persson,et al.  Sliding Friction: Physical Principles and Applications , 1997 .

[23]  Hugh Spikes,et al.  The Frictional Properties of Newtonian Fluids in Rolling–Sliding soft-EHL Contact , 2005 .

[24]  C. Venner,et al.  Surface roughness attenuation in line and point contacts , 2000 .

[25]  B. Persson.  Theory of rubber friction and contact mechanics , 2001 .