Structural changes in spruce wood during different steps of steam explosion pretreatment

Abstract Steam explosion (SE) is a promising hydrothermal pretreatment technology for future biorefineries. In this study, the three steps of the steam explosion process, (1) the steam treatment (2) the explosion, and (3) the impact step were separately considered and their effects on structural changes of wood were studied. The SE experiments were performed on single wood pieces in different experimental set-ups at 7 and 14 bar pressure with 5 and 10 min treatment times. Mercury porosimetry and environmental scanning electron microscopy analyses were conducted to characterise both internal and external changes in the wood. It was found that the explosion step is not responsible for the disintegration of the wood material into small pieces; instead, the disintegration occurs due to impact of softened wood chips. However, the porosity profiles of the tracheids change during the explosion step. Altogether, all three steps of the SE process contribute in a synergistic way to an increase in pore size and total intrusion volume.

[1]  Alvin O. Converse,et al.  Effect of steam explosion pretreatment on pore size and enzymatic hydrolysis of poplar , 1986 .

[2]  L. Cai,et al.  Effects of steam explosion on wood appearance and structure of sub-alpine fir , 2006, Wood Science and Technology.

[3]  C. Zetzl,et al.  Development of an integrated thermal and enzymatic hydrolysis for lignocellulosic biomass in fixed-bed reactors , 2011 .

[4]  J. Parajó,et al.  Extracting value-added products before pulping: Hemicellulosic ethanol from Eucalyptus globulus wood , 2012 .

[5]  STEAM EXPLOSION TREATMENT OF EUCALYPTUS GLOBULUS WOOD: INFLUENCE OF OPERATIONAL CONDITIONS ON CHEMICAL AND STRUCTURAL MODIFICATIONS , 2011 .

[6]  Wolfgang G. Glasser,et al.  Steam-assisted biomass fractionation. I. Process considerations and economic evaluation , 1998 .

[7]  B. Saake,et al.  Optimization of steam pretreatment conditions for enzymatic hydrolysis of poplar wood , 2011 .

[8]  R. Overend,et al.  Fractionation of lignocellulosics by steam-aqueous pretreatments , 1987, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.

[9]  E. W. Washburn.  Note on a Method of Determining the Distribution of Pore Sizes in a Porous Material. , 1921, Proceedings of the National Academy of Sciences of the United States of America.

[10]  H. L. Ritter,et al.  Pore Size Distribution in Porous Materials , 1948 .

[11]  J N Saddler,et al.  Steam pretreatment of lignocellulosic material for enhanced enzymatic hydrolysis , 1987, Biotechnology and bioengineering.

[12]  A. Pfriem,et al.  Alteration of the pore structure of spruce (Picea abies (L.) Karst.) and maple (Acer pseudoplatanus L.) due to thermal treatment as determined by helium pycnometry and mercury intrusion porosimetry , 2008 .

[13]  A. V. van Heiningen,et al.  A larch based biorefinery: pre-extraction and extract fermentation to lactic acid , 2011 .

[14]  K. Wong,et al.  Ultrastructure of steam-exploded wood , 1988, Wood Science and Technology.

[15]  M. Lindström,et al.  BIOREFINERY: Mild steam explosion: A way to activate wood for enzymatic treatment, chemical pulping and biorefinery processes , 2012 .

[16]  John E. Haight,et al.  Cell wall alterations in loblolly pine wood decayed by the white-rot fungus, Ceriporiopsis subvermispora , 1997 .

[17]  M. Ballesteros,et al.  Pretreatment technologies for an efficient bioethanol production process based on enzymatic hydrolysis: A review. , 2010, Bioresource technology.

[18]  H. Grethlein,et al.  Common aspects of acid prehydrolysis and steam explosion for pretreating wood , 1991 .

[19]  C. Sasaki,et al.  Effect of steam explosion pretreatment with ultra-high temperature and pressure on effective utilization of softwood biomass , 2012 .