Laser-induced Si3N4–TiN ceramics degradation

[1]  V. Tokarev,et al.  Fiber-Laser Ablation of High-Temperature TiN–TiB2 Ceramics for Protective Coating , 2019, Laser Congress 2019 (ASSL, LAC, LS&C).

[2]  R. Tapia,et al.  Processes connected with local laser heating of TiB2 armor ceramics , 2019, Science of Sintering.

[3]  R. Tapia,et al.  Surface changes in Al2O3–base composite ceramics under action of laser treatment , 2019, Ceramics International.

[4]  M. Kakazey,et al.  Formation of CrxCyOz coatings under laser ablation of Cr23C6 ceramics , 2018, Surface and Coatings Technology.

[5]  L. Licea-Jiménez,et al.  Engineered TiO2 and SiO2-TiO2 films on silica-coated glass for increased thin film durability under abrasive conditions , 2017 .

[6]  Soham Das,et al.  Investigation of mechanical properties of CVD grown titanium silicon nitride thin films under reduced atmosphere , 2017 .

[7]  R. Tapia,et al.  Formation and Properties of TiB2–Ni Composite Ceramics , 2016 .

[8]  H. P. Van Landeghem,et al.  Investigation of a Ferrite/Silicon Nitride Composite Concept Aimed at Automotive Applications , 2012 .

[9]  Jun Zhao,et al.  Cutting performance and wear mechanisms of Sialon–Si3N4 graded nano-composite ceramic cutting tools , 2012 .

[10]  B. Basu,et al.  Advanced Structural Ceramics , 2011 .

[11]  B. Basu,et al.  Advanced Structural Ceramics: Basu/Advanced Structural Ceramics , 2011 .

[12]  V. Rawat,et al.  Ultrathin TiSiN overcoat protection layer for magnetic media , 2011 .

[13]  F. Bucciotti,et al.  Perspectives of the Si3N4-TiN ceramic composite as a biomaterial and manufacturing of complex-shaped implantable devices by electrical discharge machining (EDM). , 2010, Journal of applied biomaterials & biomechanics : JABB.

[14]  H. Sueyoshi,et al.  Properties of Si3N4–TiN composites fabricated by spark plasma sintering by using a mixture of Si3N4 and Ti powders , 2010 .

[15]  Y. Sakka,et al.  Si3N4-TiN nanocomposite by nitration of TiSi2 and consolidation by hot pressing and spark plasma sintering. , 2009, Journal of nanoscience and nanotechnology.

[16]  M. I. Markevich,et al.  Preparation of TiSi2 via flash lamp processing of TiN/Ti/Si heterostructures , 2009 .

[17]  J. Kuebler,et al.  Microstructure and electrical properties of Si3N4-TiN composites sintered by hot pressing and spark plasma sintering , 2007 .

[18]  A. Sanjurjo,et al.  TiSiN nanocomposite coatings by chemical vapor deposition in a fluidized bed reactor at atmospheric pressure (AP/FBR-CVD) , 2006 .

[19]  B. Blug,et al.  Hybrid‐ and Ceramic Rolling Bearings with Modified Surface and Low Friction Rolling Contact , 2006 .

[20]  F. Riley.  Silicon Nitride and Related Materials , 2004 .

[21]  L. Živković,et al.  Microstructural characterization and computer simulation of conductivity in Si3N4-TiN composites , 2004 .

[22]  S. Shimada,et al.  Fabrication of TiN/Si3N4 Ceramics by Spark Plasma Sintering of Si3N4 Particles Coated with Nanosized TiN Prepared by Controlled Hydrolysis of Ti(O-i-C3H7)4 , 2003 .

[23]  V. Medri,et al.  Factors inducing degradation of properties after long term oxidation of Si3N4–TiN electroconductive composites , 2002 .

[24]  C. Kawai,et al.  Separation–permeation performance of porous Si3N4 ceramics composed of columnar β-Si3N4 grains as membrane filters for microfiltration , 1999 .

[25]  S. Tsuruzono,et al.  Development of silicon nitride components for ceramic gas turbine engine (CGT302) , 1999 .

[26]  H. Miao,et al.  Silicon Nitride Ceramic Cutting-Tools and Their Applications , 1995 .

[27]  Michelle M. Gauthier,et al.  Engineered materials handbook , 1995 .

[28]  C. Cabral,et al.  Study of C49‐TiSi2 and C54‐TiSi2 formation on doped polycrystalline silicon using in situ resistance measurements during annealing , 1994 .

[29]  Anna Tampieri,et al.  Development and characterization of electroconductive Si3N4-TiN composites , 1992 .

[30]  Theodore J. Reinhart,et al.  Engineered materials handbook , 1987 .

[31]  Eugene A. Irene,et al.  Oxidation of silicide thin films: TiSi2 , 1983 .