Processing of Tellurite-Based Glass with Low OH Content

We report results on the processing and characterization of tellurite-based glass in the TeO2–Bi2O3–ZnO (TBZ) glass family and efforts to reduce their absorption loss due to residual hydroxyl (OH) content. We show that the introduction of alkaline or alkaline earth in the glass network, drying of the batch with fluorine-based raw materials before melting, and melting of the glass in O2-rich atmosphere can lead to a significant reduction in OH content. Employing these steps in TBZ glass processing resulted in a 93% reduction of OH content as compared with a reference composition. The reduction in OH content was verified by a decrease of the absorption band center at 3000 cm−1 as well as a decrease of the free volume in the glass. The addition of F in the glass network was found to reduce the fraction of nonbridging oxygen associated with OH. X-ray fluorescence spectrometry was used to determine the amount of remaining F.

[1]  N. Min’ko,et al.  Effect of water on the structure and properties of glass (Review) , 2007 .

[2]  S. Mandal,et al.  Properties of unconventional lithium bismuthate glasses , 1997 .

[3]  N. Peyghambarian,et al.  Effect of alkali metal oxides R2O (R = Li, Na, K, Rb and Cs) and network intermediate MO (M = Zn, Mg, Ba and Pb) in tellurite glasses , 2009 .

[4]  M. Hafid,et al.  Structure of (45−x)Na2O–xBaO–5ZnO–50P2O5 glasses studied by DSC and infrared spectroscopy , 2002 .

[5]  Ashok Kumar V,et al.  Effect of hydroxyl content on the physical properties of calcium metaphosphate glasses , 1999 .

[6]  S. Benmokhtar,et al.  New investigation within ZnO–TeO2–Bi2O3 system in air , 2007 .

[7]  R. El-Mallawany.  The optical properties of tellurite glasses , 1992 .

[8]  R. Pattnaik,et al.  Source of optical loss in tellurite glass fibers , 2006 .

[9]  J. Stone,et al.  Reduction of loss due to OH in optical fibres by a two-step OH - OD exchange process , 1982 .

[10]  J. Shelby.  Properties of alkali–alkaline earth metaphosphate glasses , 2000 .

[11]  Setsuhisa Tanabe,et al.  Hydroxyl groups in erbium-doped germanotellurite glasses , 2001 .

[12]  John H. Campbell,et al.  Neodymium Fluorescence Quenching by Hydroxyl Groups in Phosphate Laser Glasses , 2004 .

[13]  Masaharu Ohashi,et al.  Optical Properties of Multi-component Oxide Glasses and Glass Fibers , 2002 .

[14]  G. S. Murugan,et al.  Temperature-assisted electrical poling of TeO2–Bi2O3–ZnO glasses for non-linear optical applications , 2004 .

[15]  Fabrication of OH-free multimode fiber by vapor phase axial deposition , 1982 .

[16]  E. Vogel,et al.  Neodymium-doped tellurite single-mode fiber laser. , 1994, Optics letters.

[17]  E. Metwalli,et al.  Modifier effects on the properties and structures of aluminophosphate glasses , 2001 .

[18]  Neil P. Sessions,et al.  Spectroscopy of Tm3+-doped tellurite glasses for 1470 nm fiber amplifier , 2002 .

[19]  L. Canioni,et al.  Effect of niobium oxide introduction on erbium luminescence in borophosphate glasses , 2006 .

[20]  P. Baer,et al.  Band Spectra in the Schumann Region of NO and N2+ with Enriched Nitrogen-15 , 1952, Nature.

[21]  Lili Hu,et al.  Concentration quenching in erbium-doped tellurite glasses , 2006 .

[22]  T. Yoko,et al.  Linear and Nonlinear Optical Properties of TeO2 Glass , 1993 .

[23]  John Ballato,et al.  Processing and characterization of core–clad tellurite glass preforms and fibers fabricated by rotational casting , 2010 .

[24]  Victor G. Plotnichenko,et al.  Hydroxyl groups in high-purity silica glass , 2000 .