A new six-parallel-legged walking robot for drilling holes on the fuselage

In this paper, a new kind of six-parallel-legged robot is presented. It is designed for drilling holes on the aircraft surface. Each leg of the robot is a 3-DOF parallel mechanism with three chains: 1UP and 2UPS. The three prismatic joints are active joints and can be controlled either by position or by force. First, the task process and the gait plan are discussed and then, according to the requirement, the control method is introduced. After that, the mechanism topology patterns under different working conditions are studied and the control mode of each motor is determined. Then the kinematical model is built up, based on which the position control curves can be obtained. The simulation result shows that the robot can walk pretty well on the fuselage surface and that the actuation forces are quite smooth. Furthermore, the first prototype has been manufactured and some experiments such as walking and manipulation have been done.

[1]  Daniel E. Koditschek,et al.  RHex: A Simple and Highly Mobile Hexapod Robot , 2001, Int. J. Robotics Res..

[2]  Branko Sarh,et al.  Aircraft Manufacturing and Assembly , 2009, Handbook of Automation.

[3]  John Hartmann,et al.  Robotic Drilling System for 737 Aileron , 2007 .

[4]  Giorgio Figliolini,et al.  Mechanical Design of a Novel Biped Climbing and Walking Robot , 2010 .

[5]  Ying Chun Wang,et al.  Bioceramic Composite Coatings Fabricated by Nd-YAG Laser Cladding Process on Ti6Al4V Substrate , 2012 .

[6]  Jun Wu,et al.  Dynamics and control of a planar 3-DOF parallel manipulator with actuation redundancy , 2009 .

[7]  Alfred A. Rizzi,et al.  The LittleDog robot , 2011, Int. J. Robotics Res..

[8]  Hongbo Wang,et al.  Application of Parallel Leg Mechanisms in Quadruped/Biped Reconfigurable Walking Robot , 2009 .

[9]  Pan Liu,et al.  Experimental Research on Force/Position Control of a Wire-Driven Parallel Rehabilitative Robot , 2011 .

[10]  Jianhe Lei,et al.  Kinematic analysis of a novel 3-DOF actuation redundant parallel manipulator using artificial intelligence approach , 2011 .

[11]  Giorgio Figliolini,et al.  Mechanics and Simulation of Six-Legged Walking Robots , 2007 .

[12]  Li Cheng,et al.  Hybrid Force/Position Control Investigation of Parallel Machine Tool with Redundant Actuation , 2011 .

[13]  Lai Xi Zhang,et al.  Four-Point Regulation Algorithm for an End-Effector of a Flexible Drilling Robot , 2011 .

[14]  Mohd Sapuan Salit,et al.  An optimise drilling process for an aircraft composite structure using design of experiments , 2009 .

[15]  Russell Devlieg,et al.  Applied Accurate Robotic Drilling for Aircraft Fuselage , 2010 .

[16]  Jie Liang,et al.  Robotic drilling system for titanium structures , 2011 .

[17]  Nicolas Andreff,et al.  Force/position control of parallel robots using exteroceptive pose measurements , 2011 .