A new method of fabricating a blend scaffold using an indirect three-dimensional printing technique

Due to its simplicity and effectiveness, the physical blending of polymers is considered to be a practical strategy for developing a versatile scaffold having desirable mechanical and biochemical properties. In the present work, an indirect three-dimensional (i3D) printing technique was proposed to fabricate a 3D free-form scaffold using a blend of immiscible materials, such as polycaprolactone (PCL) and gelatin. The i3D printing technique includes 3D printing of a mold and a sacrificial molding process. PCL/chloroform and gelatin/water were physically mixed to prepare the blend solution, which was subsequently injected into the cavity of a 3D printed mold. After solvent removal and gelatin cross-linking, the mold was dissolved to obtain a PCL-gelatin (PG) scaffold, with a specific 3D structure. Scanning electron microscopy and Fourier transform infrared spectroscopy analysis indicated that PCL masses and gelatin fibers in the PG scaffold homogenously coexisted without chemical bonding. Compression tests confirmed that gelatin incorporation into the PCL enhanced its mechanical flexibility and softness, to the point of being suitable for soft-tissue engineering, as opposed to pure PCL. Human adipose-derived stem cells, cultured on a PG scaffold, exhibited enhanced in vitro chondrogenic differentiation and tissue formation, compared with those on a PCL scaffold. The i3D printing technique can be used to blend a variety of materials, facilitating 3D scaffold fabrication for specific tissue regeneration. Furthermore, this convenient and versatile technique may lead to wider application of 3D printing in tissue engineering.

[1]  Dietmar W Hutmacher,et al.  Scaffold-based tissue engineering: rationale for computer-aided design and solid free-form fabrication systems. , 2004, Trends in biotechnology.

[2]  F. Barry,et al.  Gelatin-based resorbable sponge as a carrier matrix for human mesenchymal stem cells in cartilage regeneration therapy. , 2000, Journal of biomedical materials research.

[3]  L. Ghasemi‐Mobarakeh,et al.  Electrospun poly(epsilon-caprolactone)/gelatin nanofibrous scaffolds for nerve tissue engineering. , 2008, Biomaterials.

[4]  S. Ramakrishna,et al.  Characterization of the surface biocompatibility of the electrospun PCL-collagen nanofibers using fibroblasts. , 2005, Biomacromolecules.

[5]  Dong-Yol Yang,et al.  Development of dual scale scaffolds via direct polymer melt deposition and electrospinning for applications in tissue regeneration. , 2008, Acta biomaterialia.

[6]  Changyou Gao,et al.  Surface modification of polycaprolactone with poly(methacrylic acid) and gelatin covalent immobilization for promoting its cytocompatibility. , 2002, Biomaterials.

[7]  Deok‐Ho Kim,et al.  Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink , 2014, Nature Communications.

[8]  E B Hunziker,et al.  Optical and mechanical determination of Poisson's ratio of adult bovine humeral articular cartilage. , 1997, Journal of biomechanics.

[9]  S. Hollister.  Porous scaffold design for tissue engineering , 2005, Nature materials.

[10]  Dong-Woo Cho,et al.  Solid freeform fabrication technology applied to tissue engineering with various biomaterials , 2012 .

[11]  Dong-Woo Cho,et al.  Unit cell-based computer-aided manufacturing system for tissue engineering , 2012, Biofabrication.

[12]  A. Atala,et al.  Biomaterials for tissue engineering , 2000, World Journal of Urology.

[13]  Yilin Cao,et al.  The influence of Gelatin/PCL ratio and 3-D construct shape of electrospun membranes on cartilage regeneration. , 2014, Biomaterials.

[14]  H. Park,et al.  Characterizations of fish gelatin films added with gellan and κ-carrageenan , 2007 .

[15]  Hae Woon Choi,et al.  Micropatterning and characterization of electrospun poly(ε‐caprolactone)/gelatin nanofiber tissue scaffolds by femtosecond laser ablation for tissue engineering applications , 2011, Biotechnology and bioengineering.

[16]  Ta-Jen Huang,et al.  Effect of pore size on ECM secretion and cell growth in gelatin scaffold for articular cartilage tissue engineering. , 2009, Acta biomaterialia.

[17]  P. Sajkiewicz,et al.  Structure and morphology of electrospun polycaprolactone/gelatine nanofibres , 2013 .

[18]  S. Boyce,et al.  Engineered human skin fabricated using electrospun collagen-PCL blends: morphogenesis and mechanical properties. , 2009, Tissue engineering. Part A.

[19]  S. Nair,et al.  Single step electrospinning of chitosan/poly(caprolactone) nanofibers using formic acid/acetone solvent mixture , 2010 .

[20]  Bethany C Gross,et al.  Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences. , 2014, Analytical chemistry.

[21]  Linda G Griffith,et al.  Emerging Design Principles in Biomaterials and Scaffolds for Tissue Engineering , 2002, Annals of the New York Academy of Sciences.

[22]  Min Sup Kim,et al.  The development of genipin-crosslinked poly(caprolactone) (PCL)/gelatin nanofibers for tissue engineering applications. , 2010, Macromolecular bioscience.

[23]  GeunHyung Kim,et al.  Hybrid Process for Fabricating 3D Hierarchical Scaffolds Combining Rapid Prototyping and Electrospinning , 2008 .

[24]  Dong-Woo Cho,et al.  Indirect three-dimensional printing of synthetic polymer scaffold based on thermal molding process , 2014, Biofabrication.

[25]  F. J. Dzida,et al.  Comparative study of the intrinsic mechanical properties of the human acetabular and femoral head cartilage , 1991, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[26]  F. Guilak,et al.  Tensile properties of articular cartilage are altered by meniscectomy in a canine model of osteoarthritis , 1999, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[27]  Dong-Woo Cho,et al.  Octahedron pore architecture to enhance flexibility of nasal implant-shaped scaffold for rhinoplasty , 2014 .

[28]  TsengHubert,et al.  Anisotropic poly(ethylene glycol)/polycaprolactone hydrogel-fiber composites for heart valve tissue engineering. , 2014 .

[29]  B. Bay,et al.  Evaluation of electrospun PCL/gelatin nanofibrous scaffold for wound healing and layered dermal reconstitution. , 2007, Acta biomaterialia.

[30]  J. Jansen,et al.  The performance of dental pulp stem cells on nanofibrous PCL/gelatin/nHA scaffolds. , 2009, Journal of biomedical materials research. Part A.

[31]  Dong-Woo Cho,et al.  Development of an indirect stereolithography technology for scaffold fabrication with a wide range of biomaterial selectivity. , 2012, Tissue engineering. Part C, Methods.

[32]  K. Leong,et al.  Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs. , 2003, Biomaterials.

[33]  C. Cho,et al.  Role of pigment epithelium-derived factor in the involution of hemangioma: autocrine growth inhibition of hemangioma-derived endothelial cells. , 2014, Biochemical and biophysical research communications.

[34]  Dong-Woo Cho,et al.  Projection image-generation algorithm for fabrication of a complex structure using projection-based microstereolithography , 2012 .

[35]  Dong-Woo Cho,et al.  Evaluation of the effective diffusivity of a freeform fabricated scaffold using computational simulation. , 2013, Journal of biomechanical engineering.

[36]  Seeram Ramakrishna,et al.  Electrospinning of gelatin fibers and gelatin/PCL composite fibrous scaffolds. , 2005, Journal of biomedical materials research. Part B, Applied biomaterials.

[37]  Zi Yin,et al.  The regulation of tendon stem cell differentiation by the alignment of nanofibers. , 2010, Biomaterials.