Numerical Analysis of Baffle Cut on Shell Side Heat Exchanger Performance with Inclined Baffles

ABSTRACT In this work, an attempt has been made to decrease the pressure drop and to increase the heat transfer rate in a shell and tube heat exchanger (STHX) by tilting the baffle angle and by varying the baffle cut. The process of solving the simulation includes modeling, meshing, and analyzing the geometry of the STHX by using Pro-E, hypermesh, and computational fluid dynamics package of ANSYS Fluent, respectively. The objective of this study is to find a suitable baffle inclination and baffle cut for the efficient performance of the STHX. The baffle inclinations of 25°, 30°, 35°, and 40° were considered for three different baffle cuts of 25%, 30%, and 35% of shell inside diameter and the results were compared with segmental baffle of inclination angle 0°. The shell side flow with different inclination angles and baffle cuts results in a significant variation in heat transfer rate and pressure drop in the STHX. The results provide a clear idea that the heat transfer rate is maximum in inclined baffle heat exchanger compared to that of segmental baffle heat exchanger. Further it is found that the STHX with the configuration of 35º baffle inclination angle and baffle cut of 30% of shell inside diameter provides higher heat transfer rate with minimum pressure drop compared to all other configurations.

[1]  Pongjet Promvonge,et al.  Numerical investigation of laminar heat transfer in a square channel with 45° inclined baffles , 2010 .

[2]  C. C. Gentry.  RODbaffle heat exchanger technology , 1990 .

[3]  Martin Fiebig,et al.  Heat transfer enhancement and drag by longitudinal vortex generators in channel flow , 1991 .

[4]  Mehdi Bahiraei,et al.  Effects of geometrical parameters on hydrothermal characteristics of shell-and-tube heat exchanger with helical baffles: Numerical investigation, modeling and optimization , 2015 .

[5]  Ilker Tari,et al.  Shell side CFD analysis of a small shell-and-tube heat exchanger , 2010 .

[6]  Pongjet Promvonge,et al.  Thermal characterization in a circular tube fitted with inclined horseshoe baffles , 2015 .

[7]  Min Zeng,et al.  Forced Convection Heat Transfer Enhancement by Porous Pin Fins in Rectangular Channels , 2010 .

[8]  Petr Stehlík,et al.  Helical Baffles in Shell-and-Tube Heat Exchangers, Part I: Experimental Verification , 1996 .

[9]  Wei Liu,et al.  Parametric study on turbulent heat transfer and flow characteristics in a circular tube fitted with louvered strip inserts , 2012 .

[10]  Wei Liu,et al.  A numerical study on thermo-hydraulic characteristics of turbulent flow in a circular tube fitted with conical strip inserts , 2011 .

[11]  James E. O'Brien,et al.  Local Heat Transfer and Pressure Drop for Finned-Tube Heat Exchangers Using Oval Tubes and Vortex Generators , 2001, Heat Transfer: Volume 1 — Fundamentals of Heat Transfer.

[12]  R. Mukherjee,et al.  Use double-segmental baffles in shell-and-tube heat exchangers , 1992 .

[13]  J. C. Cheng,et al.  Heat transfer enhancement of backward-facing step flow in a channel by using baffle installation on the channel wall , 2005 .

[14]  J. Lutcha,et al.  Performance improvement of tubular heat exchangers by helical baffles , 1990 .

[15]  Prashanta Dutta,et al.  Internal cooling augmentation in rectangular channel using two inclined baffles , 2005 .

[16]  Jian Wen,et al.  Experimental investigation on performance comparison for shell-and-tube heat exchangers with different baffles , 2015 .

[17]  Yaping Chen,et al.  Flow and heat transfer performances of helical baffle heat exchangers with different baffle configurations , 2015 .

[18]  Wei Liu,et al.  Flow mechanism and heat transfer enhancement in longitudinal-flow tube bundle of shell-and-tube heat exchanger , 2009 .

[19]  A. Bergles.  ExHFT for fourth generation heat transfer technology , 2002 .

[20]  Petr Stehlík,et al.  Different Strategies to Improve Industrial Heat Exchange , 2002 .

[21]  R. Mukherjee,et al.  Effectively design shell-and-tube heat exchangers , 1998 .

[22]  Pongjet Promvonge,et al.  Thermal performance enhancement in a heat exchanger tube fitted with inclined vortex rings , 2014 .

[23]  Suyi Huang,et al.  Thermo-hydraulic characteristics of laminar flow in an enhanced tube with conical strip inserts , 2012 .

[24]  S. J. Green,et al.  PWR steam generators , 1995 .

[25]  Jian Wen,et al.  Experimental investigation on heat transfer enhancement of a heat exchanger with helical baffles through blockage of triangle leakage zones , 2014 .

[26]  Jin-Ping Wang,et al.  Experimental performance comparison of shell-and-tube oil coolers with overlapped helical baffles and segmental baffles , 2013 .

[27]  Sarah Rothstein.  Fundamentals Of Heat Exchanger Design , 2016 .

[28]  Deng Xianhe,et al.  Investigation of heat transfer enhancement of roughened tube bundles supported by ring or rod supports , 1998 .