Toward Realization of 2.4 GHz Balunless Narrowband Receiver Front-End for Short Range Wireless Applications

The demand for radio frequency (RF) transceivers operating at 2.4 GHz band has attracted considerable research interest due to the advancement in short range wireless technologies. The performance of RF transceivers depends heavily on the transmitter and receiver front-ends. The receiver front-end is comprised of a low-noise amplifier (LNA) and a downconversion mixer. There are very few designs that focus on connecting the single-ended output LNA to a double-balanced mixer without the use of on-chip transformer, also known as a balun. The objective of designing such a receiver front-end is to achieve high integration and low power consumption. To meet these requirements, we present the design of fully-integrated 2.4 GHz receiver front-end, consisting of a narrow-band LNA and a double balanced mixer without using a balun. Here, the single-ended RF output signal of the LNA is translated into differential signal using an NMOS-PMOS (n-channel metal-oxide-semiconductor, p-channel metal-oxide-semiconductor) transistor differential pair instead of the conventional NMOS-NMOS transistor configuration, for the RF amplification stage of the double-balanced mixer. The proposed receiver circuit fabricated using TSMC 0.18 µm CMOS technology operates at 2.4 GHz and produces an output signal at 300 MHz. The fabricated receiver achieves a gain of 16.3 dB and consumes only 6.74 mW operating at 1.5 V, while utilizing 2.08 mm2 of chip area. Measurement results demonstrate the effectiveness and suitability of the proposed receiver for short-range wireless applications, such as in wireless sensor network (WSN).

[1]  Syed Manzoor Qasim,et al.  Evaluation of Energy-Efficient Cooperative Scheme for Wireless Sensor Nodes Used in Long Distance Water Pipeline Monitoring Systems , 2013, 2013 Fifth International Conference on Computational Intelligence, Communication Systems and Networks.

[2]  W. Kluge,et al.  A Fully Integrated 2.4-GHz IEEE 802.15.4-Compliant Transceiver for ZigBee™ Applications , 2006, IEEE Journal of Solid-State Circuits.

[3]  Howard C. Luong,et al.  A 1-V 2.4-GHz CMOS RF receiver front-end for Bluetooth application , 2001, ISCAS 2001. The 2001 IEEE International Symposium on Circuits and Systems (Cat. No.01CH37196).

[4]  J. Ryynanen,et al.  2.4-GHz receiver for sensor applications , 2005, IEEE Journal of Solid-State Circuits.

[5]  Wolfgang Knoll,et al.  Characterization and Applications , 2011 .

[6]  Behzad Razavi.  A 2.4-GHz CMOS receiver for IEEE 802.11 wireless LANs , 1999 .

[7]  W. Bachtold,et al.  A 6.5-mW receiver front-end for Bluetooth in 0.18-/spl mu/m CMOS , 2002, 2002 IEEE MTT-S International Microwave Symposium Digest (Cat. No.02CH37278).

[8]  Oliver King,et al.  A 1V 5mA multimode IEEE 802.15.6/bluetooth low-energy WBAN transceiver for biotelemetry applications , 2012, 2012 IEEE International Solid-State Circuits Conference.

[9]  M. Jamal Deen,et al.  Design issues of a low power wideband frequency doubler implementation in 0.18 μm CMOS , 2007 .

[10]  Gefei Zhou.  Narrow-Band Receiver and Ultra-Wideband Low Noise Amplifier , 2009 .

[11]  M. J. Deen,et al.  High frequency noise of MOSFETs I Modeling , 1998 .

[12]  Alberto García Ortiz,et al.  A review on wireless sensor network for water pipeline monitoring applications , 2013, 2013 International Conference on Collaboration Technologies and Systems (CTS).

[13]  Y. Tsividis,et al.  A 2.4-GHz ISM-Band Sliding-IF Receiver With a 0.5-V Supply , 2008, IEEE Journal of Solid-State Circuits.

[14]  Tor A. Fjeldly,et al.  CMOS RF Modeling, Characterization and Applications , 2002 .

[15]  Lin Min,et al.  A transformer-loaded receiver front end for 2.4 GHz WLAN in 0.13 μm CMOS technology , 2011 .

[16]  Matthias Lange,et al.  Compliant Transceiver for ZigBee Applications , 2006 .

[17]  A.A. Abidi,et al.  A 2.4-GHz low-IF receiver for wideband WLAN in 6-/spl mu/m CMOS-architecture and front-end , 2000, IEEE Journal of Solid-State Circuits.

[18]  M. J. Deen,et al.  Low-power CMOS integrated circuits for radio frequency applications , 2005 .

[19]  D. Wang,et al.  A 2.5 GHz low noise high linearity LNA/mixer IC in SiGe BiCMOS technology , 2001, 2001 IEEE Radio Frequency Integrated Circuits (RFIC) Symposium (IEEE Cat. No.01CH37173).

[20]  A. Bevilacqua,et al.  An ultrawideband CMOS low-noise amplifier for 3.1-10.6-GHz wireless receivers , 2004, IEEE Journal of Solid-State Circuits.

[21]  B. Razavi.  A 2 . 4-GHz CMOS Receiver for IEEE 802 . 11 Wireless LAN ’ s , 1999 .

[22]  A. Rusu,et al.  Ultra-low power 2.4 GHz CMOS receiver front-end for sensor nodes , 2007, 2007 18th European Conference on Circuit Theory and Design.

[23]  A. Abidi,et al.  A 2 . 4-GHz Low-IF Receiver for Wideband WLAN in 0 . 6-m CMOS — Architecture and Front-End , 2000 .

[24]  M. J. Deen,et al.  A Fully Integrated CMOS Power Amplifier Using Superharmonic Injection-Locking for Short-Range Applications , 2011, IEEE Sensors Journal.

[25]  J. Ryynanen,et al.  2.4-GHz receiver for sensor applications , 2004, Proceedings of the 30th European Solid-State Circuits Conference.

[26]  M.J. Deen,et al.  A 4-mW monolithic CMOS LNA at 5.7GHz with the gate resistance used for input matching , 2006, IEEE Microwave and Wireless Components Letters.

[27]  Chuan Yi Tang,et al.  A 2.|E|-Bit Distributed Algorithm for the Directed Euler Trail Problem , 1993, Inf. Process. Lett..

[28]  H.M. Jafari,et al.  Low-power integrated CMOS RF transceiver circuits for short-range applications , 2007, 2007 50th Midwest Symposium on Circuits and Systems.

[29]  Xin Liu,et al.  An Ultra Low Power Baseband Transceiver IC for Wireless Body Area Network in 0.18-$\mu$ m CMOS Technology , 2011, IEEE Transactions on Very Large Scale Integration (VLSI) Systems.

[30]  Chih-Hung Chen,et al.  Design of the Input Matching Network of RF CMOS LNAs for Low-Power Operation , 2007, IEEE Transactions on Circuits and Systems I: Regular Papers.

[31]  M.J. Deen,et al.  The Impact of On-Chip Interconnections on CMOS RF Integrated Circuits , 2009, IEEE Transactions on Electron Devices.

[32]  Syed Manzoor Qasim,et al.  Single-Chip Fully Integrated Direct-Modulation CMOS RF Transmitters for Short-Range Wireless Applications , 2013, Sensors.

[33]  I. Nam,et al.  CMOS RF amplifier and mixer circuits utilizing complementary Characteristics of parallel combined NMOS and PMOS devices , 2005, IEEE Transactions on Microwave Theory and Techniques.

[34]  Yiping Feng,et al.  Design of a High Performance 2-GHz Direct-Conversion Front-End With a Single-Ended RF Input in 0.13 $\mu$m CMOS , 2009, IEEE Journal of Solid-State Circuits.

[35]  Sang-Sun Yoo,et al.  A Low Power Current-reused CMOS RF Front-end with Stacked LNA and Mixer , 2007, 2007 Topical Meeting on Silicon Monolithic Integrated Circuits in RF Systems.

[36]  Syed Manzoor Qasim,et al.  A Proposed Scalable Design and Simulation of Wireless Sensor Network-Based Long-Distance Water Pipeline Leakage Monitoring System , 2014, Sensors.

[37]  Taeksang Song,et al.  A Low-Power 2.4-GHz Current-Reused Receiver Front-End and Frequency Source for Wireless Sensor Network , 2007, IEEE Journal of Solid-State Circuits.